Ryoshu Furutani

发表

Calibration of Articulated Arm Coordinate Measuring Machine Considering Measuring Posture

Hiroyuki Hamana, Mitsushi Tominaga, Miyu Ozaki, 2011, Int. J. Autom. Technol..

KINEMATICAL CALIBRATION OF ARTICULATED CMM USING MULTIPLE SIMPLE ARTIFACTS

Kiyoshi Takamasu, Ryoshu Furutani, Ken Shimojima, 2003 .

Artifact Calibration of Coordinate Measuring Machine-Kinematic Calibration-

Kiyoshi Takamasu, Ryoshu Furutani, Ken Shimojima, 2003 .

Optimization of Measurement Strategy for calibration of Coordinate Measuring Machine

Sonko Osawa, Tomizo Kurosawa, Ryoshu Furutani, 2004 .

Development of a Sensitive Probe for Coordinate Measuring Machines

Ryoshu Furutani, Midori Watanabe, 2005 .

Artifact Calibration of Parallel Mechanism (1st Report)

Kiyoshi Takamasu, Ryoshu Furutani, Ken Shimojima, 2004 .

Self-Calibration of XY-Stage with Parallel Mechanism

Miyu Ozaki, Ryoshu Furutani, Satoshi Yokouchi, 2014 .

ESTIMATION OF UNCERTAINTY FROM UNKNOWN SYSTEMATIC ERRORS IN COORDINATE METROLOGY

Kiyoshi Takamasu, Shigeo Ozono, Ryoshu Furutani, 2003 .

Calibration of three dimensional mechanism-novel calibration method for 3 DOF parallel mechanism

Kiyoshi Takamasu, Osamu Sato, Ryoshu Furutani, 2002, 2002 IEEE International Conference on Industrial Technology, 2002. IEEE ICIT '02..

1514 Development of on-machine measurement system by in-process position monitoring of ultraprecision machine tool

Masahiro Takeda, Yutaka Yamagata, Takuya Hosobata, 2015 .

Profile measurement without reference error comparing two parallel linear stages

Miyu Ozaki, Ryoshu Furutani, 2017, 2017 12th IEEE Conference on Industrial Electronics and Applications (ICIEA).

Measurement of Straightness for Two-Dimensional Translatory Stage

Ryoshu Furutani, Masakazu Watanabe, 2010 .

Spindle-runout generator devices to evaluate a rotary encoder's ability to detect spindle runout

Ryoshu Furutani, Yuri Ueyama, Tsukasa Watanabe, 2019 .

Traceability System of Coordinate Measuring Machines Through Internet

Sonko Osawa, Toshiyuki Takatsuji, Ryoshu Furutani, 2004 .

Adaptive Calibration for Articulated Arm Coordinate Measuring Machine

Ryoshu Furutani, 2019 .

Calibration of Articulated CMM considering measuring attitude (1st report):Development of experiment system to cover wider measuring volume of A-CMM

Hiroyuki Hamana, Mitsushi Tominaga, Ryoshu Furutani, 2010 .

Development of Pneumatic Ball Probe (2nd Report)-Evaluative Experiments of Flux Trigger Sensor Type Probe.

Masahiko Hiraki, Kiyoshi Takamasu, Shigeo Ozono, 2000 .

Estimation of deviations between stylus position and CMM scales indication in high speed probing

Ryoshu Furutani, Leon Levasier, Pieter Schellekens, 1997 .

Verification of Interim Check Method of CMM

Miyu Ozaki, Ryoshu Furutani, Yusuke Asano, 2011, Int. J. Autom. Technol..

Comparison of daily check artefacts of CMM

Ryoshu Furutani, Miyu Ozaki, Tsutomu Itabash, 2014 .

Using Surface Plasmon Polaritons to Analyze Flow Rate Distribution Near a Channel Surface

Miyu Ozaki, Ryoshu Furutani, M. Ozaki, 2017, Int. J. Autom. Technol..

Artefact calibration of parallel mechanism, kinematic calibration with a priori knowledge

Kiyoshi Takamasu, Osamu Sato, Ryoshu Furutani, 2004 .

Statistical Evaluation of Minimum Zone Method in Coordinate Metrology

Kiyoshi Takamasu, Shigeo Ozono, Ryoshu Furutani, 1998 .

UNCERTAINTY ESTIMATION OF CONSTRUCTED METROLOGY FRAME

Ryoshu Furutani, 2017 .

Development of a Pneumatic Ball Probe(1st Report) -Basic Construction-

Masahiko Hiraki, Kiyoshi Takamasu, Shigeo Ozono, 1999 .

Artifact Calibration of Coordinate Measuring Machine (2nd Report): —Self Calibration of Redundant Coordinate Measuring Machine—@@@—冗長座標測定機の自己校正—

Kiyoshi Takamasu, Ryoshu Furutani, Ken Shimojima, 2004 .

Estimation of Uncertainty in Feature Based Metrology (3rd Report)

Kiyoshi Takamasu, Shigeo Ozono, Ryoshu Furutani, 2005 .

Artifact Calibration of Coordinate Measuring Machine (3rd Report) : Estimation of Uncertainty of Measurements After Calibration

Kiyoshi Takamasu, Ryoshu Furutani, Ken Shimojima, 2005 .

A super-high-accuracy angular index table

Tsukasa Watanabe, Ryoshu Furutani, Yuri Ueyama, 2020 .

Basic concept of feature-based metrology

Kiyoshi Takamasu, Shigeo Ozono, Ryoshu Furutani, 1999 .

Development of a new artifact for the calibration of large scale instruments

Ryoshu Furutani, Kotaro Kamahora, 2001 .

Uncertainty of calibration of 2D planar Coordinate Measuring Machine

Miyu Ozaki, Ryoshu Furutani, 2012 .

Plasmonic trapping of sub-micro objects with metallic antennae

Yutaka Yamagata, Miyu Ozaki, Ryoshu Furutani, 2016 .

Development of Pneumatic Ball Probe for Measuring Small Hole

Masahiko Hiraki, Kiyoshi Takamasu, Shigeo Ozono, 1997 .

The uncertainty of parallel model coordinate measuring machine

Miyu Ozaki, Ryoshu Furutani, M. Ozaki, 2011 .

Calibration and Uncertainty of CMM based on Estimation of Geometric Errors.

Ryoshu Furutani, Kenta Umetsu, 2003 .

3-D shape measurement by self-referenced pattern projection method

Kiyoshi Takamasu, Shigeo Ozono, Sonko Osawa, 1999 .

Basic Concept of Feature Based Metrology.

Kiyoshi Takamasu, Shigeo Ozono, Ryoshu Furutani, 1998 .

Reliability of Parameters for Associated Features in Coordinate Metrology.

Kiyoshi Takamasu, Shigeo Ozono, Ryoshu Furutani, 1997 .