C. Kim

发表

Role and effect of Co2O3 additive on the upturn characteristics of ZnO varistors

Eun Dong Kim, M. Oh, C. Kim, 1985 .

Pressureless sintering and related reaction phenomena of Al2O3-doped B4C

C. Kim, Chae-Hyun Lee, 1992, Journal of Materials Science.

Flaw‐Tolerance and R‐Curve Behavior of Liquid‐Phase‐Sintered Silicon Carbides with Different Microstructures

D. K. Kim, C. Kim, Seung Kun Lee, 1995 .

The effect of whisker length on the mechanical properties of alumina-SiC whisker composites

C. Kim, Y. Baek, 1989 .

Coating of yttria precursor on AIN powder byin situ precipitation

D. K. Kim, H. Lee, C. Kim, 1994 .

Effect of microwave heating on densification and α → β phase transformation of silicon nitride

D. K. Kim, C. Kim, Y. Kim, 1997 .

Effect of Solvent on Titania Particle Formation and Morphology in Thermal Hydrolysis of TiCl4

D. K. Kim, H. Park, C. Kim, 1997 .

Effects of ZrO2 and Y2O3 dissolved in zyttrite on the densification and theα/β phase transformation of Si3N4 in Si3N4-ZrO2 composite

C. Kim, J. R. Kim, 1990 .

Preparation of Monodisperse and Spherical Zirconia Powders by Heating of Alcohol–Aqueous Salt Solutions

D. K. Kim, H. Park, C. Kim, 1995 .

Formation of austenite from a ferrite-pearlite microstructure during intercritical annealing

W. Jeong, C. Kim, 1985 .

Pyrolytic Conversion of Spherical Organo‐silica Powder to Silicon Nitride under Nitrogen

D. K. Kim, C. Kim, Y. Moon, 2005 .

Coating of Y2O3 additive on AlN powder and its effect on the thermal conductivity of AlN ceramics

D. K. Kim, C. Kim, Kim Weon-Ju, 1995 .

Formation of monodisperse spherical TiO2 powders by thermal hydrolysis of Ti(SO4)2

D. K. Kim, H. Park, C. Kim, 2005 .

Microstructural development and mechanical properties of pressureless-sintered SiC with plate-like grains using Al2O3-Y2O3 additives

C. Kim, Seung Kun Lee, Y. Kim, 1994 .

Toughening Behavior of Silicon Carbide with Additions of Yttria and Alumina

C. Kim, Do-Hyeong Kim, 1990 .

Preparation of Monodisperse ZrO2 by the Microwave Heating of Zirconyl Chloride Solutions

D. K. Kim, C. Kim, Y. Moon, 1995 .

Tempered martensite embrittlement in Fe-Ni-C steel

C. Kim, H. Kwon, 1983 .

The effect of surface carbonation on the hydration of CaO

C. Kim, Hs Song, 1990 .

Hydrothermal Synthesis of Spherical Perovskite Oxide Powders Using Spherical Gel Powders

D. K. Kim, C. Kim, Jae-Young Choi, 2005 .

The α- to β-Si3N4 transformation in the presence of liquid silicon

Ji Yeon Park, C. Kim, 1988 .

Morphological Effect of Second Phase on the Thermal Conductivity of AIN Ceramics

D. K. Kim, C. Kim, Weon‐Ju Kim, 1996 .

Synthesis of LaCrO3 Powders by Microwave Induced Combustion of Metal Nitrate-urea Mixture Solution

D. K. Kim, H. Park, C. Kim, 1998 .

Effect of iron and boron carbide on the densification and mechanical properties of titanium diboride ceramics

D. K. Kim, C. Kim, E. Kang, 1989 .

The influence of the various transport properties of the nitriding atmosphere on the formation of reaction-bonded Si3N4

C. Kim, H. Kim, 1985 .

The effects of second-component gases on the transport properties of silicon nitriding atmosphere

C. Kim, H. Kim, 1984 .

Improvements in mechanical properties of TiB2 by the dispersion of B4C particles

C. Kim, E. Kang, 1990 .

Two-step sintering of a TiB2-Ni cermet

D. K. Kim, C. Kim, E. Kang, 1996 .

Fabrication of TiB2/TiC composites by the directional reaction of titanium with boron carbide

C. Kim, Seun Lee, Do-Hyeong Kim, 1994, Journal of Materials Science.

Pressureless sintering and microstructural development of B sub 4 C-TiB sub 2 composites

D. K. Kim, C. Kim, 1988 .

Fabrication and microstructural evaluation of ZrB2/ZrC/Zr composites by liquid infiltration

S. Woo, C. Kim, E. Kang, 1994 .

Effects of Free Silicon on the α to βPhase Transformation in Silicon Nitride

Ji Yeon Park, C. Kim, J. R. Kim, 1987 .

Effect of Heating Rate on Pore Shrinkage in Yttria‐doped Zirconia

C. Kim, Do-Hyeong Kim, 1993 .

Carbothermic Synthesis of Monodispersed Spherical Si3N4/SiC Nanocomposite Powder

D. K. Kim, C. Kim, Jae-Young Choi, 2004 .

Sintering and characterization of Al2O3-B4C composites

C. Kim, C. Jung, 1991, Journal of Materials Science.

Structural and electrical properties of rf magnetron‐sputtered Ba1−xSrxTiO3 thin films on indium‐tin‐oxide‐coated glass substrate

M. Oh, C. Kim, T. S. Kim, 1994 .

Interface reactions between manganese zinc ferrite single crystals and SiO2-PbO-ZnO ternary systems

K. Hong, D. K. Kim, C. Kim, 1995 .

Consideration on the Intergranular Tempered Martensite Embrittlement

C. Kim, H. Kwon, 1984 .

The direct bonding between copper and MgO-doped Si3N4

C. Kim, J. Park, Steven Kim, 1990 .

Preparation of monodispersed spherical silicon carbide by the sol-gel method

C. Kim, In-Sig Seog, 1993 .

Effects of Y2O3 and ZrO2 on the Densification of Si3N4‐Zr(Y)O2 Composites

C. Kim, J. R. Kim, Do-Hyeong Kim, 1990 .

The influence of the various transport properties of the nitriding atmosphere on the formation of reaction-bonded Si3N4

C. Kim, H. Kim, 1985 .

Interfacial reaction product and its effect on the strength of copper to alumina eutectic bonding

Sung Tae Kim, C. Kim, 1992 .

Sinter-forged YBa2Cu3O7−x superconducting ceramics from the spray-roasted powders

C. B. Carter, G. Sung, C. Kim, 1991, Journal of Materials Science.

Effects of transformed ferrite growth on the tensile fracture characteristics of a dual-phase steel

W. Jeong, C. Kim, 1988 .

Ferrite growth on cooling after intercritical annealing in a dual phase steel

W. Jeong, C. Kim, 1985 .

On the Isolated Retained Austenite in a Dual-Phase Steel

W. Jeong, C. Kim, 1987 .

Fracture behavior in medium-carbon martensitic Si- and Ni-steels

C. Kim, H. Kwon, 1986 .

New considerations on tempered martensite embrittlement

C. Kim, H. Kwon, 1986 .

Formation and Characterization of Monodisperse, Spherical Organo‐Silica Powders from Organo‐Alkoxysilane‐Water System

D. K. Kim, C. Kim, Jae-Young Choi, 2005 .

The effect of buffer layer on the structural and electrical properties of (BaSr)TiO3 thin films deposited on indium tin oxide‐coated glass substrate by using a rf magnetron sputtering method

M. Oh, C. Kim, T. S. Kim, 1994 .

Effects of annealing on the grain boundary potential barrier of ZnO varistor

Eun Dong Kim, M. Oh, C. Kim, 1986 .

Effect of Chromia Alloying on Machining Performance of Alumina Ceramic Cutting Tools

C. Kim, B. B. Ghata, W. C. Smith, 1975 .

Crystallization Behavior of Cordierite-Based Glass with Excess SiO2 and Al2O3 at Initial Stage

Jun Liu, C. Kim, Y. Son, 1994 .

Electric field effect and transport properties of a grain boundary in thin films

G. Sung, C. Kim, J. Suh, 1996 .

Evidence for dislocation‐controlled crater wear of polycrystalline aluminum oxide cutting tools

D. Hasselman, C. Kim, G. E. Kane, 1973 .

EFFECT OF GRAIN-SIZE DISTRIBUTION ON THE BARRIER VOLTAGE OF ZNO VARISTORS

G. Sung, M. Oh, C. Kim, 1987 .

Anisotropic Grain Growth of ZnO Grain in the Varistor System ZnO-Bi2O3-MnO-TiO2

G. Sung, C. Kim, 1988 .

Microstructural Alterations in Alumina Ceramics Associated with Ballistic Impact Events

C. Kim, H. Palmour, 1970 .

Metastable Pyrochlore Structures in Sol Gel Spin Coated Lead Titanate Thin Films on Silicon Substrate

Jeon-Kook Lee, C. Kim, Hyung-Jin Jung, 1992 .

Capacitance voltage characteristics of sol-gel derived lead titanate thin films on a silicon substrate

Jeon-Kook Lee, C. Kim, Hyung-Jin Jung, 1991 .

Tempered martensite embrittlement in Fe-Mo-C and Fe-W-C steel

C. Kim, H. Kwon, 1983 .