Andrew Makeev

发表

Variable Zoom technique for X-Ray Computed Tomography

Yuri Nikishkov, Dmytro Kuksenko, Andrew Makeev, 2020 .

A concept for quantifying equivalent initial flaw size distribution in fracture mechanics based life prediction models

Andrew Makeev, Yuri Nikishkov, Erian A. Armanios, 2007 .

Predicting Defect Formation at Early Stages of Manufacturing Process

Andrew Makeev, Guillaume Seon, Brian Shonkwiler, 2019 .

Fatigue performance of production-quality aircraft fastener holes

James C. Newman, Andrew Makeev, W. Steven Johnson, 2007 .

Simultaneous uncertainty quantification of fracture mechanics based life prediction model parameters

Andrew Makeev, Erian A. Armanios, Richard J. Cross, 2007 .

Finite element mesh generation for composites with ply waviness based on X-ray computed tomography

Andrew Makeev, Yuri Nikishkov, Gennadiy Nikishkov, 2013, Adv. Eng. Softw..

Hierarchical probabilistic modeling of short-crack growth behavior in AISI 4340 steel

Andrew Makeev, James C. Newman, Richard J. Cross, 2009 .

Progressive Fatigue Damage Simulation in Composites based on Explicit Finite Element Formulation

Andrew Makeev, Yuri Nikishkov, Guillaume Seon, 2019 .

Manufacturing Issues and Measurement Techniques for Assessment of the Effects on Structural Performance of Composite Parts

Edward Lee, Andrew Makeev, Julien Noel, 2010 .

Structures Technology for Component Damage and Failure Prediction

G. P. Nikishkov, Andrew Makeev, Brian Shonkwiler, 2019 .

A Comparison of Predictions From Probabilistic Crack Growth Models Inferred From Virkler's Data

Andrew Makeev, Erian A. Armanios, Richard J. Cross, 2006 .

Fatigue Life Assessment for Composite Structure

Andrew Makeev, Yuri Nikishkov, 2011 .

Analysis Methods for Improving Confidence in Material Qualification for Laminated Composites

Andrew Makeev, Yuri Nikishkov, Mark E. Robeson, 2019, Journal of the American Helicopter Society.

46. Data-Driven Models Improving Confidence in Material Qualification (Abstract only)

Andrew Makeev, Yuri Nikishkov, Guillaume Seon, 2016 .

Characterization of Cohesive Zone Laws Using Digital Image Correlation

Andrew Makeev, Bastiaan C.W. Van Der Vossen, 2018 .

Stochastic Updating of Probabilistic Life Models for Rotorcraft Dynamic Components

Andrew Makeev, Richard J. Cross, 2009 .

Finite Element-Based Simulations of Damage in Composites

Yuri Nikishkov, Andrew Makeev, Guillaume Seon, 2009 .

Progress in Failure: Toward Reliable Failure Predictions in Composites

Andrew Makeev, Yuri Nikishkov, Erian A. Armanios, 2018 .

Empirical Modeling Based on Neural Networks and Bayesian Learning

Yuri Nikishkov, Andrew Makeev, Erian A. Armanios, 2004 .

AIAA AVIATION 2014 -19th AIAA International Space Planes and Hypersonic Systems and Technologies Conference

S. Gulli, Luca Maddalena, Andrew Makeev, 2014 .

Measurement of Interlaminar Tensile Strength and Elastic Properties of Composites Using Open-Hole Compression Testing and Digital Image Correlation

Andrew Makeev, Guillaume Seon, Brian Justusson, 2019, Applied Sciences.

Effect of various aircraft production drilling procedures on hole quality

James C. Newman, Andrew Makeev, W. Steven Johnson, 2006 .

DIC Data Driven Methods to Verify Simplifying Assumptions and Increase Confidence in Material Properties of Laminated Composites

Andrew Makeev, Brian Justusson, Guillaume Seon, 2017 .

On a higher order analysis of laminated composite strips with extension-twist coupling

Andrew Makeev, Erian A. Armanios, A. Makeev, 1999 .

DIC Data-Driven Methods Improving Confidence in Material Qualification of Composites

Andrew Makeev, Yuri Nikishkov, Brian Shonkwiler, 2017 .

Predicting Formation of Manufacturing Defects in Contoured Composites

Andrew Makeev, Yuri Nikishkov, Guillaume Seon, 2019 .

Structural analysis of composites with porosity defects based on X-ray computed tomography

Andrew Makeev, Yuri Nikishkov, Guillaume Seon, 2014 .

Characterization of nonlinear shear properties for composite materials using digital image correlation and finite element analysis

Andrew Makeev, Yihong He, Brian Shonkwiler, 2012 .

Advanced composite materials technology for rotorcraft through the use of nanoadditives

Andrew Makeev, Charles E. Bakis, Gina Miller, 2015 .

The influence of curing stresses on the extension-twist coupling in pretwisted composite laminates

Andrew Makeev, Erian A. Armanios, David Hooke, 1998 .

Structures perspective for strength and fatigue prognosis in composites with manufacturing irregularities

Andrew Makeev, Yuri Nikishkov, Guillaume Seon, 2014 .

Measurement of voids in composites by X-ray Computed Tomography

Andrew Makeev, Yuri Nikishkov, Luca Airoldi, 2013 .

Mesh morphing methodology for strength predictions in composites

Andrew Makeev, Yuri Nikishkov, Brian Shonkwiler, 2016 .

Uncertainty analysis in composite material properties characterization using digital image correlation and finite element model updating

Andrew Makeev, Tiren He, A. Makeev, 2018 .

Assessing 3D shear stress–strain properties of composites using Digital Image Correlation and finite element analysis based optimization

Andrew Makeev, Brian Shonkwiler, Guillaume Seon, 2015 .

Characterization of stress–strain behavior of composites using digital image correlation and finite element analysis

Andrew Makeev, Tiren He, Brian Shonkwiler, 2016 .