A. D. Torre

发表

Development of a Digital Rock Physics workflow for the analysis of sandstones and tight rocks

C. A. Mora, A. Onorati, G. Montenegro, 2017 .

The 3Dcell Approach for the Acoustic Modeling of After-Treatment Devices

Antonio J. Torregrosa, Augusto Della Torre, Angelo Onorati, 2011 .

ANonlinear Quasi-3D Approach for theModeling of Mufflers with Perforated Elements and Sound-AbsorbingMaterial

A. Onorati, G. Montenegro, A. D. Torre, 2014 .

Fluid Dynamic and Acoustic Optimization Methodology of a Motorbike Intake Airbox Using Multilevel Numerical CFD Models and Experimental Validation Tests

Augusto Della Torre, T. Cerri, Giulio Lenzi, 2013 .

A Quasi-3D Model for the Simulation of the Unsteady Flows in I.C. Engine Pipe Systems

Augusto Della Torre, T. Cerri, Angelo Onorati, 2012 .

Geometric and Fluid-Dynamic Characterization of Actual Open Cell Foam Samples by a Novel Imaging Analysis Based Algorithm

Gian Marco Bianchi, Stefania Falfari, Augusto Della Torre, 2017 .

CFD characterization of flow regimes inside open cell foam substrates

Gavin Tabor, Gianluca Montenegro, A. Della Torre, 2014 .

Performance of randomized Kelvin cell structures as catalytic substrates: Mass-transfer based analysis

Dimos Poulikakos, Augusto Della Torre, Gianluca Montenegro, 2014 .

Design of Catalytic Devices by Means of Genetic Algorithm: Comparison Between Open-Cell Foam and Honeycomb Type Substrates

Federico Brusiani, Gian Marco Bianchi, Stefania Falfari, 2016 .

Comparison of geometrical, momentum and mass transfer characteristics of real foams to Kelvin cell lattices for catalyst applications

Augusto Della Torre, Gianluca Montenegro, Rolf Kaufmann, 2017 .

On the catalytic performance of open cell structures versus honeycombs

G. Montenegro, P. D. Eggenschwiler, F. Lucci, 2015 .

Modeling of two-phase flows at low Capillary number with VoF method

A. Onorati, G. Montenegro, A. D. Torre, 2022, Computers & Fluids.

Comparison of Numerical and System Dynamics Methods for Modeling Wave Propagation in the Intake Manifold of a Single-Cylinder Engine

Yann Guezennec, Augusto Della Torre, Marcello Canova, 2013 .

CFD modeling of catalytic reactions in open-cell foam substrates

Angelo Onorati, G. Montenegro, G. Groppi, 2016, Comput. Chem. Eng..

A preliminary computational analysis towards the use of Electrically Heated Mixing Catalyst for innovative SCR after-treatment systems

A. Onorati, G. Montenegro, A. D. Torre, 2022, Journal of Physics: Conference Series.

A CHT framework for the CFD analysis of the spray-wall thermal interaction in the dosing unit of SCR systems for diesel engines

A. Onorati, G. Montenegro, A. D. Torre, 2019, SECOND INTERNATIONAL CONFERENCE ON MATERIAL SCIENCE, SMART STRUCTURES AND APPLICATIONS: ICMSS-2019.

A particle swarm optimization algorithm with novelty search for combustion systems with ultra-low emissions and minimum fuel consumption

T. Lucchini, R. Novella, J. Gomez-Soriano, 2023, Appl. Soft Comput..

Modeling advanced combustion modes in compression ignition engines with tabulated kinetics

T. Lucchini, G. D’Errico, A. Onorati, 2019, Applied Energy.

Instationary heat and mass transfer phenomena in additive manufactured open cell polyhedral structures for automotive catalysis

A. Onorati, G. Montenegro, G. Koltsakis, 2021, Chemical Engineering Science.

The Prediction of Silencer Acoustical Performances by 1D, 1D-3D and quasi-3D Non-Linear Approaches

Angelo Onorati, Gianluca Montenegro, A. Della Torre, 2013 .

A 1D/Quasi-3D Coupled Model for the Simulation of I.C. Engines: Development and Application of an Automatic Cell-Network Generator

Augusto Della Torre, T. Cerri, Gianluca Montenegro, 2017 .

Fluid Dynamic Optimization of a Moto3 TM Engine by Means of 1D and 1D-3D Simulations

Augusto Della Torre, Gianluca Montenegro, Marco Fiocco, 2016 .

A Nonlinear Quasi-3D Approach for the Modeling of Mufflers with Perforated Elements and Sound-Absorbing Material

Angelo Onorati, Gianluca Montenegro, Robert Fairbrother, 2013 .

Development and Application of 3D Generic Cells to the Acoustic Modelling of Exhaust Systems

Augusto Della Torre, Angelo Onorati, Gianluca Montenegro, 2011 .

1D-3D Coupled Simulation of the Fuel Spray Propagation Inside the Air-Box of a Moto3 Motorbike: Analysis of Spray Targeting and Injection Timing

Augusto Della Torre, Marco Fiocco, T. Cerri, 2017 .

Coupled 1D-quasi3D fluid dynamic models for the simulation of IC engine intake and exhaust systems

Augusto Della Torre, Angelo Onorati, Gianluca Montenegro, 2017 .

Thermomanagement of Li-Ion Battery Cells During Charge/discharge Processes: Experiments and

V. Papetti, P. D. Eggenschwiler, A. D. Torre, 2021 .

Windage Power Losses of Ordinary Gears: Different CFD Approaches Aimed to the Reduction of the Computational Effort

Augusto Della Torre, Carlo Gorla, Franco Concli, 2014 .

CFD Investigation of the Impact of Electrical Heating on the Light-off of a Diesel Oxidation Catalyst

A. Onorati, T. Cerri, G. Montenegro, 2018 .