Y. Komatsu

发表

An Analysis of Biogas Reforming Process on Ni/YSZ and Ni/SDC Catalysts

J. Szmyd, S. Kimijima, G. Brus, 2012 .

A novel approach to improve the mathematical modelling of the internal reforming process for solid oxide fuel cells using the orthogonal least squares method

A. Sciazko, J. Szmyd, S. Kimijima, 2014 .

The effect of overpotentials on the transient response of the 300W SOFC cell stack voltage

Shinji Kimijima, Grzegorz Brus, Janusz S. Szmyd, 2014 .

An attempt to minimize the temperature gradient along a plug-flow methane/steam reforming reactor by adopting locally controlled heating zones

A. Sciazko, J. Szmyd, S. Kimijima, 2014 .

A Performance Analysis of a Solid Oxide Fuel Cell - Micro Gas Turbine Hybrid System Using Biogas

Shinji Kimijima, Janusz S. Szmyd, Yosuke Komatsu, 2009 .

An Application of Generalized Least Squares Method to an Analysis of Methane/Steam Reforming Process on a Ni/YSZ Catalyst

A. Sciazko, J. Szmyd, G. Brus, 2013 .

Performance analysis for the part-load operation of a solid oxide fuel cell–micro gas turbine hybrid system

Shinji Kimijima, Janusz S. Szmyd, Yosuke Komatsu, 2008 .

Isostatic pressing of screen printed nickel-gadolinium doped ceria anodes on electrolyte-supported solid oxide fuel cells

N. Shikazono, A. Sciazko, Y. Komatsu, 2021 .

Influence of Initial Powder Morphology on Polarization Characteristics of Nickel/Gadolinium-Doped-Ceria Solid Oxide Fuel Cells Electrode

Z. Jiao, N. Shikazono, A. Sciazko, 2019, Journal of The Electrochemical Society.

Effects of mass fraction of La0.9Sr0.1Cr0.5Mn0.5O3-δ and Gd0.1Ce0.9O2-δ composite anodes for nickel free solid oxide fuel cells

N. Shikazono, A. Sciazko, Y. Komatsu, 2021, Journal of the European Ceramic Society.

A three-dimensional reconstruction of coal microstructure using the Cryo-FIB-SEM technique

A. Schertel, A. Sciazko, J. Szmyd, 2020 .

Numerical analysis of single and multiple particles of Belchatow lignite dried in superheated steam

A. Sciazko, J. Szmyd, S. Kimijima, 2018 .

Experimental and analytical evaluation of the drying kinetics of Belchatow lignite in relation to the size of particles

A. Sciazko, J. Szmyd, S. Kimijima, 2016 .

Comprehensive study on the kinetics and modelling of superheated steam drying of Belchatow lignite from Poland

N. Shikazono, A. Sciazko, J. Szmyd, 2016 .

Towards the improvement of thermal efficiency in lignite‐fired power generation: Concerning the utilization of Polish lignite deposits in state‐of‐the‐art IGCC technology

N. Shikazono, A. Sciazko, J. Szmyd, 2016 .

INFLUENCE OF GEOLOGICAL VARIATIONS ON LIGNITE DRYING KINETICS IN SUPERHEATED STEAM ATMOSPHERE FOR BELCHATOW DEPOSIT LOCATED IN THE CENTRAL POLAND

N. Shikazono, A. Sciazko, J. Szmyd, 2016 .

Ni-GDC and Ni-YSZ electrodes operated in solid oxide electrolysis and fuel cell modes

N. Shikazono, A. Sciazko, Y. Komatsu, 2021, Journal of Thermal Science and Technology.

Multiscale microstructural evolutions of nickel-gadolinium doped ceria in solid oxide fuel cell anode

N. Shikazono, A. Sciazko, Y. Komatsu, 2020 .

Combining structural, electrochemical, and numerical studies to investigate the relation between microstructure and the stack performance

H. Iwai, J. Szmyd, G. Brus, 2017, Journal of Applied Electrochemistry.

Density Functional Theory Study on the Reaction of Finite-Sized Graphene with Methyne

Y. Komatsu, Tomoya Takada, T. Takagi, 2013 .

Holocene Advance of Rock Glaciers in Yabusawa Cirque on Mount Senjogatake, Central Japan, Inferred from the Spatial Variations in Rock Weathering Rind Thickness

M. Aoyama, Y. Komatsu, Y. Kariya, 2002 .

Design point analyses of solid oxide fuel cell‐steam cycle combined system: Effects of fuel reforming and bottoming cycle steam parameters

N. Shikazono, A. Sciazko, Y. Komatsu, 2022, International Journal of Energy Research.

Role of spatial variability of rainfall intensity: improve‐ ment of Eagleson's classical model to explain the rela‐ tionship between the coefficient of variation of annual maximum discharge and catchment size

M. Sivapalan, Y. Komatsu, Y. Kuzuha, 2006 .

The role of subsurface runoff through bedrock on storm flow generation

Y. Onda, Y. Komatsu, M. Tsujimura, 2001 .

An experimental investigation on the drying kinetics of a single coarse particle of Belchatow lignite in an atmospheric superheated steam condition

Shinji Kimijima, Janusz S. Szmyd, Yosuke Komatsu, 2015 .

Geomorphological Characteristics of Serpentinite Mountains by Two Definitions of Drainage Network

Y. Komatsu, 1999 .

Thermodynamic analysis of 100% system fuel utilization solid oxide fuel cell (SOFC) system fueled with ammonia

N. Shikazono, A. Sciazko, Y. Komatsu, 2021, Energy Conversion and Management.

Preparation of YBCO/ZrO2 thin films on Si by MOCVD using a mode converting type of microwave plasma apparatus

Y. Komatsu, K. Akashi, S. Ito, 1999 .

3D microstructures of solid oxide fuel cell Ni-YSZ anodes with carbon deposition

N. Shikazono, A. Sciazko, T. Hara, 2023, Chemical Engineering Journal.

Feasibility study on saturated water cooled solid oxide fuel cell stack

N. Shikazono, A. Sciazko, Y. Komatsu, 2020 .

Operando observation of patterned nickel - gadolinium doped ceria solid oxide fuel cell anode

Z. Jiao, N. Shikazono, A. Sciazko, 2021, Journal of Power Sources.

Segmentation of Solid Oxide Cell Electrodes by Patch Convolutional Neural Network

N. Shikazono, A. Sciazko, Y. Komatsu, 2021 .

AN EXPERIMENTAL AND THEORETICAL APPROACH FOR THE CARBON DEPOSITION PROBLEM DURING STEAM REFORMING OF MODEL BIOGAS

J. Szmyd, S. Kimijima, G. Brus, 2015 .

Numerical analysis on dynamic behavior of solid oxide fuel cell with power output control scheme

Shinji Kimijima, Janusz S. Szmyd, Yosuke Komatsu, 2013 .

Unsupervised Generative Adversarial Network for 3-D Microstructure Synthesis from 2-D Image

Yosuke Komatsu, Anna Sciazko, Naoki Shikazono, 2021, ECS Meeting Abstracts.

Ultrasonic Measurement of Microdisplacement Induced by Acoustic Radiation Force

Y. Saijo, Ryo Nagaoka, Y. Komatsu, 2013 .

A comparative study of two various empirical methodologies for deriving kinetics of methane/steam reforming reaction

G. Brus, Y. Komatsu, S. Kimijima, 2016 .

Power maximization and load range extension of solid oxide fuel cell operation by water cooling

N. Shikazono, A. Sciazko, Y. Komatsu, 2023, Energy.

A novel approach to the experimental study on methane/steam reforming kinetics using the Orthogonal Least Squares method

A. Sciazko, J. Szmyd, S. Kimijima, 2014 .

Evaluation of Strontium Doped Lanthanum Chromium Manganite (LSCM) and Gadolinium Doped Ceria (GDC) Anode with Different Compositions

N. Shikazono, A. Sciazko, Y. Komatsu, 2019, ECS Transactions.

Impingement of a round jet on a flat surface

Y. Komatsu, I. Tani, Y. Komatsu, 1966 .

Runoff and Chemical Characteristics in Stream Water of Hilly Headwater Basins Underlain by Gravel and Weathered Granite

S. Hattori, Y. Onda, Y. Komatsu, 2001 .

Operando observations of active three phase boundary of patterned nickel - Yttria stabilized zirconia electrode in solid oxide cell

N. Shikazono, A. Sciazko, J. Onishi, 2022, Journal of Power Sources.

Prediction of electrode microstructure evolutions with physically constrained unsupervised image-to-image translation networks

A. Sciazko, Y. Komatsu, Takaaki Shimura, 2024, npj Computational Materials.

Prediction of fuel cell performance degradation using a combined approach of machine learning and impedance spectroscopy

A. Sciazko, Y. Komatsu, Zaihong Sun, 2023, Journal of Energy Chemistry.

Experimental study on the 300W class planar type solid oxide fuel cell stack: Investigation for appropriate fuel provision control and the transient capability of the cell performance

Shinji Kimijima, Grzegorz Brus, Janusz S. Szmyd, 2012 .