C. Tsao

发表

Tribological behavior of self-lubricating aluminium/SiC/graphite hybrid composites synthesized by the semi-solid powder-densification method

M. Guo, C. Tsao, 2000 .

Multiple and extended shear band formation in MgCuGd metallic glass during high-pressure torsion

J. Schoenung, E. Lavernia, R. Valiev, 2014 .

Structural and mechanical characterizations of ductile Fe particles-reinforced Mg-based bulk metallic glass composites

J. C. Huang, C. Liu, J. S. Jang, 2009 .

Making Non-Dendritic Structure via Modified Cooling Slope Technique

Yen‐Ting Chen, C. Tsao, C. Chiang, 2014 .

Enhanced strength and ductility of AZ80 Mg alloys by spray forming and ECAP

Lingling Tang, E. Lavernia, R. Valiev, 2016 .

Influence of the preferred orientation and thickness of zirconium nitride films on the diffusion property in copper

Heng-Ghieh Yang, C. Tsao, Chuan-Pu Liu, 2004 .

Influence of growth temperature on microstructure and mechanical properties of nanocrystalline zirconium carbide films

C. Tsao, Chuan-Pu Liu, Cheng-Shi Chen, 2005 .

Study of mechanical properties of PVD ZrN films, deposited under positive and negative substrate bias conditions

Heng-Ghieh Yang, C. Tsao, Chuan-Pu Liu, 2004 .

Influence of substrate bias on practical adhesion, toughness, and roughness of reactive dc-sputtered zirconium nitride films

Heng-Ghieh Yang, C. Tsao, Chuan-Pu Liu, 2004 .

High strength, nano-structured Mg–Al–Zn alloy

E. Lavernia, Yizhang Zhou, S. Mathaudhu, 2011 .

Synthesis and characterization of the Mg-based amorphous/nano ZrO2 composite alloy

J. C. Huang, J. S. Jang, C. Tsao, 2006 .

Workability of spray-formed 7075 Al alloy reinforced with SiCp at elevated temperatures

Y. Su, Yen-Chun Chen, C. Tsao, 2004 .

Plasticity enhancement of Mg58Cu28.5Gd11Ag2.5 based bulk metallic glass composites dispersion strengthened by Ti particles

J. C. Huang, P. Hsieh, J. S. Jang, 2010 .

Spray forming of silicon added AZ91 magnesium alloy and its workability

C. Tsao, C. Y. Chen, Chi Y.A. Tsao, 2004 .

Mg–Cu–Gd layered composite plate synthesized via the spray forming process

M. Guo, C. Tsao, J.S.C. Jang, 2008 .

Tribological Performance of 6061 Aluminum Alloy/Graphite Materials under Oil-Lubricated and Dry Sliding Conditions

J. Lin, C. Tsao, Y. Yung, 1998 .

Tribological behavior of aluminum/SiC/nickel-coated graphite hybrid composites

M. Guo, C. Tsao, 2002 .

Response of aluminium/graphite composite to deformation in the semi-solid state

C. P. Chen, C. Tsao, Ching-Yun Chen, 1996, Journal of Materials Science.

Properties of graded TiCxNy coatings deposited by a low-temperature HCD ion coating technique

Shih-chin Lee, C. Tsao, Y. Yang, 2001 .

Spray Forming of AZ91 Magnesium Alloys with and without Si Addition

C. Tsao, C. Chen, 2005 .

STRUCTURAL EVOLUTION OF CONVENTIONAL CAST DENDRITIC AND SPRAY-CAST NON-DENDRITIC STRUCTURES DURING ISOTHERMAL HOLDING IN THE SEMI-SOLID STATE

Y. Su, C. Tsao, J. Wang, 1997 .

Semi-solid deformation of non-dendritic structures—I. Phenomenological behavior

C. P. Chen, C. Tsao, 1997 .

Si coarsening of spray-formed high loading hypereutectic Al–Si alloys in the semisolid state

C. Tsao, C. Chiang, 2005 .

Mechanical Properties of the Hot-Pressed Amorphous Mg65Cu20Y10Ag5/NanoZrO2 Composite Alloy

J. C. Huang, J. S. Jang, C. Tsao, 2007 .

Modeling of the liquid dynamic compaction spray process

N. J. Grant, N. Grant, C. Tsao, 1994 .

Hot Workability of the Mg65Cu20Y10Ag5 Amorphous/ NanoZrO2 Composite Alloy within Supercooled Temperature Region

C. Tsao, I. Lee, L. Chang, 2007 .

Mechanical Properties of the MG-Based Amorphous/Nano Zirconia Composite Alloy

C. Tsao, L. Chang, P. Chiang, 2007 .

Synthesis of the Magnesium-Based Nano/Amorphous-Composite Alloy Powder by the Combination Method of Melt-Spinning and Mechanical Alloying

C. Tsao, L. Chang, J.C. Huang, 2006 .

Extrusion characteristics of spray-formed AC9A aluminum alloy

Y. Su, C. Tsao, C. Chiang, 2004 .

Thixotropic behavior and structure evolution of A356 alloy in the semisolid state

C. Tsao, Y. Yang, 1994 .

On thermomechanical properties of Au–Ag–Pd–Cu–Si bulk metallic glass

T. Tang, C. Tsao, Y. C. Chang, 2009 .

Microstructure and wear behavior of spray-formed and conventionally cast rolls of 18Cr–2.5Mo–Fe alloy

M. Guo, C. Tsao, C. Chiang, 2002 .

Coarsening Kinetics and Coarsened Si Size Distribution of Spray-Formed High Loading Hypereutectic Al-Si Alloys in the Semisolid State

C. Tsao, C. Chiang, 2006 .

Viscosity and structure variations of Al–Si alloy in the semi-solid state

C. Tsao, Y. Yang, 1997 .

Workability of Spray-Formed Al/Sip Metal Matrix Composites

C. Tsao, C. Chiang, 2003 .

Response of spray-deposited, stirred-cast and conventional cast Pb-Sn alloys to deformation in the semi-solid state

C. Tsao, C. P. Chen, 1995, Journal of Materials Science.

Microstructures and mechanical properties of spray-formed and squeeze-cast Al–25Si–0.89Cu–1.0Ni–0.84Mg alloys in solutionized and aged conditions

C. Tsao, C. Chiang, 2006 .

Spray-Formed 50Si-50Al Alloy Deformed in the Semi-Solid State

C. Tsao, H. C. Hsu, 2013 .

Strengthening and toughness of AZ61 Mg with nano SiO2 particles

Y. Hung, C. Tsao, J. Huang, 2006 .

AZ61 Mg with Nano SiO2 Particles Prepared by Spray Forming plus Extrusion

C. Tsao, Y. Hung, J.C. Huang, 2006 .

Analysis and control of gas atomization rate

T. Ando, N. Grant, C. Tsao, 1990 .

Sensitivity Study on Effects of Process Parameters on Spray Forming Pb—35Sn Alloy

Y. Su, C. Tsao, Y. M. Chen, 1997 .

Crystallization behavior of spray-formed and melt-spun Al89La6Ni5 hybrid composites with amorphous and nanostructured phases

M. Guo, C. Tsao, J. Huang, 2005 .

Projection of Extrusion Force of Spray-Formed Al-25wt%Si with High Temperature Compression

C. Tsao, C. Chiang, 2007 .

Microstructures and mechanical behaviors of Mg58Cu31Gd11 and Mg65Cu25Gd10 amorphous alloys synthesized by injection casting and melt spinning

M. Guo, C. Tsao, K. Chang, 2009 .

Effects of partial replacement of Cu and Y by Bin Mg–Cu–Y amorphous alloys

Yu-Ting Cheng, C. Tsao, Pee-Yew Lee, 2006 .

Microstructural evolution in spray-formed and melt-spun Al85Nd5Ni10 bulk hybrid composites

M. Guo, C. Tsao, J. Huang, 2006 .

Microstructure Characteristics of Spray-Formed and Melt-Spun Al85Nd5Ni10 and Al89La6Ni5 Bulk Hybrid Composites

M. Guo, C. Tsao, J.C. Huang, 2007 .

6061 Aluminum Powder Making and its Thermal and Mechanical Properties

C. Tsao, Chang-chuan Hsu, S. Yang, 2012 .

Effects of in-situ alloying and microalloying on the microstructure and recrystallization behavior of spray-deposited SAE 1008 steel sheet

N. Grant, C. Tsao, 1995 .

Measurement of the reaction energy of binary components in tri-phase thin films using the hollow cathode discharge technique

Shih-chin Lee, C. Tsao, Y. Yang, 2002 .

Modeling of solidification of molten metal droplet during atomization

Y. Su, C. Tsao, Y. H. Su, 1997 .

Synthesis and characterization of the Mg-based amorphous/nano ZrO2 composite alloy

C. Tsao, L. Chang, J. H. Young, 2006 .

Crystallization and Thermal Properties of Zr-Al-Cu-Ni Based Amorphous Alloy Added with Boron and Silicon

C. Tsao, L. Chang, T. Hung, 2005 .