D. Gorokhov

Mechanics of unloading of a rough surfaces pre-loaded joint

P. Ogar, D. Gorokhov, E. Ugryumova, 2017 .

Determining the exponent of the unloading curve when flattening a sphere

D. Gorokhov, E. Ugryumova, P. Ogar, 2020, MATEC Web of Conferences.

Influence of the characteristics of hardenable material on elastoplastic flattening of spherical asperities

D. Gorokhov, E. Ugryumova, A. Zhuk, 2020 .

Contact geometry during indentation of a sphere into an elastoplastic half-space

P. Ogar, D. Gorokhov, A. Zhuk, 2019, MATEC Web of Conferences.

Influence of the form of axisymmetric load on the stress-strain state of an elastoplastic half-space

P. Ogar, D. Gorokhov, V. Kushnarev, 2019, MATEC Web of Conferences.

The elastic-plastic contact of a single asperity of a rough surface

P. Ogar, D. Gorokhov, S. Gorbatyuk, 2017 .

The Relationship between the Deformation of Spherical Indentation and Tensile Deformation

P. Ogar, D. Gorokhov, P.M. Ogar, 2016 .

Influence of Materials Hardenability Parameters on the Machine Parts Characteristics after Unloading

P. Ogar, D. Gorokhov, 2016 .

Meyer Law Application for Solving Problems of Surface Plastic Deformation by Spherical Indentation

P. Ogar, D. Gorokhov, 2015 .

Energy Concept of Hardness by the Kinetic Sphere Indentation

P. Ogar, D. Gorokhov, V. Tarasov, 2014 .

The Correction Factor in Elastic Modulus Determining by Indentation

P. Ogar, D. Gorokhov, V. Tarasov, 2014 .

The effect of vertical and radial displacements on the parameters of the restored surface after the sphere is indented

P. Ogar, D. Gorokhov, V. A. Shilin, 2022, 13TH INTERNATIONAL SCIENTIFIC CONFERENCE ON AERONAUTICS, AUTOMOTIVE AND RAILWAY ENGINEERING AND TECHNOLOGIES (BulTrans-2021).

Elastic punching of material during flattening of a spherical asperity and restoration of the imprint in unloading

D. Gorokhov, E. Ugryumova, P. Ogar, 2020, IOP Conference Series: Materials Science and Engineering.