S. Dong

发表

Hollow carbon microspheres modified with NiCo2S4 nanosheets as a high-performance microwave absorber

C. Hong, Xiutao Li, Peitao Hu, 2021, Advanced Composites and Hybrid Materials.

Design and optimization of the coating thickness on chopped carbon fibers and sintering temperature for ZrB2-SiC-Cf composites prepared by hot pressing

Xinghong Zhang, Ping Hu, S. Dong, 2019, Journal of the European Ceramic Society.

A novel vibration-assisted slurry impregnation to fabricate Cf/ZrB2-SiC composite with enhanced mechanical properties

Xinghong Zhang, Ping Hu, Dongyang Zhang, 2019, Journal of the European Ceramic Society.

Effect of pyrolytic carbon coating on the microstructure and fracture behavior of the Cf/ZrB2-SiC composite

Xinghong Zhang, Ping Hu, Dongyang Zhang, 2018, Ceramics International.

Preparation and characterization of high-performance ZrB2–SiC–Cf composites sintered at 1450 °C

Xinghong Zhang, Ping Hu, S. Dong, 2017, Journal of Advanced Ceramics.

Microstructure, mechanical properties and thermal shock resistance of ZrB2-SiC-Cf composite with inhibited degradation of carbon fibers

Xinghong Zhang, Ping Hu, S. Dong, 2017 .

High-performance ZrB2-SiC-Cf composite prepared by low-temperature hot pressing using nanosized ZrB2 powder

Xinghong Zhang, Ping Hu, S. Dong, 2017 .

Fabrication of microstructures on the surface of a micro/hollow target ball by AFM

Xuesen Zhao, T. Sun, Yongda Yan, 2008 .

Study on effects of tip geometry on AFM nanoscratching tests

T. Sun, Yongda Yan, S. Dong, 2007 .

Biomass-derived carbon and polypyrrole addition on SiC whiskers for enhancement of electromagnetic wave absorption

Jiecai Han, Xinghong Zhang, Ping Hu, 2019, Chemical Engineering Journal.

Synthesis of several millimeters long SiC–SiO2 nanowires by a catalyst-free technique

Yuan Cheng, Minglun Li, Ping Hu, 2016 .

Strong effect of atmosphere on the microstructure and microwave absorption properties of porous SiC ceramics

Xinghong Zhang, Dongyang Zhang, S. Dong, 2018 .

NiCo2S4 nanosheets on 3D wood-derived carbon for microwave absorption

Jiecai Han, Xinghong Zhang, C. Hong, 2020 .

Construction of carbon nanorods supported hydrothermal carbon and carbon fiber from waste biomass straw for high strength supercapacitor.

Xinghong Zhang, Ping Hu, Dongyang Zhang, 2020, Journal of colloid and interface science.

Nitrogen content dependent microwave absorption property of nitrogen-doped SiC materials annealed in N 2 : Opposing trends for microparticles and nanowires

Yumin Zhang, Jiecai Han, Ping Hu, 2018, Journal of Alloys and Compounds.

Preparation, modification, and coating for carbon-bonded carbon fiber composites: A review

Xinghong Zhang, C. Hong, S. Dong, 2022, Ceramics International.

Ultralight and Hydrophobic MXene/Chitosan-derived Hybrid Carbon Aerogel with Hierarchical Pore structure for Durable Electromagnetic Interference Shielding and Thermal Insulation

Yuan Cheng, W. Han, Yongshuai Xie, 2022, Chemical Engineering Journal.

Anisotropically Oriented Carbon Films with Dual‐Function of Efficient Heat Dissipation and Excellent Electromagnetic Interference Shielding Performances

Yuan Cheng, Xinghong Zhang, W. Han, 2022, Advanced Functional Materials.

A low-cost strategy to synthesize MnO nanorods anchored on 3D biomass-derived carbon with superior microwave absorption properties

Xinghong Zhang, Xiutao Li, Peitao Hu, 2019, Journal of Materials Chemistry C.

Effects of sintering velocity on the microstructure and mechanical properties of hot-pressed ZrB2–SiC–ZrO2f ceramics

Xinghong Zhang, W. Han, Hua Jin, 2013 .

Constructing hydrothermal carbonization coatings on carbon fibers with controllable thickness for achieving tunable sorption of dyes and oils via a simple heat-treated route.

Xinghong Zhang, W. Han, S. Dong, 2020, Journal of colloid and interface science.

Flower-like NiCo2S4 Microspheres Based on Nanosheet Self-Assembly Anchored on 3D Biomass-Derived Carbon for Efficient Microwave Absorption

Xiutao Li, Peitao Hu, S. Dong, 2020 .

Catalyst-assisted synthesis of core–shell SiC/SiO2 nanowires via a simple method

Xinghong Zhang, Dongyang Zhang, S. Dong, 2016 .

Synergetic impedance matching and loss ability towards efficient microwave absorption of Fe3O4 nanoparticles anchored on SiC whiskers via a simple solvothermal method

C. Hong, S. Dong, Yaxi Chen, 2020 .

A novel combination of precursor pyrolysis assisted sintering and rapid sintering for construction of multi-composition coatings to improve ablation resistance of SiOC ceramic modified carbon fiber needled felt preform composites

Jiecai Han, Xinghong Zhang, C. Hong, 2020 .

High temperature structure evolution of macroporous SiOC ceramics prepared by a sol-gel method

Jiecai Han, S. Du, Xinghong Zhang, 2015 .

Effect of Hafnium content on structural evolution of SiHfOC ceramics at high temperatures

W. Mao, S. Dong, Lei Guo, 2022, Ceramics International.

The effect of fiber preform configuration on in-plane compressive behavior of high porosity needled carbon/carbon composites in elevated temperature environment

G. Fang, S. Meng, S. Dong, 2022, Ceramics International.

In situ growth of one-dimensional nanowires on porous PDC-SiC/Si3N4 ceramics with excellent microwave absorption properties

S. Du, S. Dong, Xiaoguang Luo, 2017 .

Microstructure and mechanical properties of ZrB2-SiC composites fabricated by the centrifugal gel casting

Xinghong Zhang, Dongyang Zhang, S. Dong, 2020 .

Regulating the formation ability and mechanical properties of high-entropy transition metal carbides by carbon stoichiometry

W. Han, S. Dong, Fu‐Zhi Dai, 2022, Journal of Materials Science & Technology.

Ultra-long Si3N4 nanobelts prepared by nanosilicon, nanosilica and graphite

Yuan Cheng, S. Dong, Boqian Sun, 2016 .

An efficient hydrothermal transformation approach for construction of controllable carbon coating on carbon fiber from renewable carbohydrate

Xinghong Zhang, S. Dong, Cheng Fang, 2019, Applied Surface Science.

High-temperature-resistant ZrO2 coating with SiC-whisker-enhanced interfacial bonding strength and improved emissivity for flexible silica fibre fabric

Haiyan Du, Jiachen Liu, Qichao Gao, 2022, Ceramics International.

Recent progress in synthesis, growth mechanisms, properties, and applications of silicon nitride nanowires

C. Hong, Peitao Hu, S. Dong, 2021, Ceramics International.

Carbon foams modified with in-situ formation of Si 3 N 4 and SiC for enhanced electromagnetic microwave absorption property and thermostability

Yumin Zhang, Jiecai Han, Xinghong Zhang, 2018 .

Strong contribution of in situ grown nanowires to enhance the thermostabilities and microwave absorption properties of porous graphene foams under different atmospheres

Xinghong Zhang, S. Dong, Xiaoguang Luo, 2017 .

Several millimeters long SiC–SiOx nanowires synthesized by carbon black and silica sol

Xinghong Zhang, S. Dong, Kunfeng Jin, 2016 .

Synthesis, properties, and multifarious applications of SiC nanoparticles: A review

Xinghong Zhang, C. Hong, Xiutao Li, 2021, Ceramics International.

Enhanced mechanical properties and thermal shock resistance of Cf/ZrB2-SiC composite via an efficient slurry injection combined with vibration-assisted vacuum infiltration

Xinghong Zhang, Dongyang Zhang, S. Dong, 2020, Journal of the European Ceramic Society.

Microstructures and mechanical properties of Cf/ZrB2-SiC composite fabricated by nano slurry brushing combined with low-temperature hot pressing

Xinghong Zhang, Dongyang Zhang, S. Dong, 2019, Journal of Alloys and Compounds.

High emissivity scale structure MoSi2-silicon glass coating on aluminum silicate fiber cloths with excellent flexibility and oxidation resistance below 1000 °C

F. Hou, Jinyu Wu, Jiachen Liu, 2022, Ceramics International.

TaSi2–SiC high-emissivity coating modified by SiB6 on flexible alumina fibre fabric with enhanced oxidation resistance and high interfacial bonding strength

Haiyan Du, Jiachen Liu, Qichao Gao, 2022, Ceramics International.

Effects of multilayer hydrothermal carbon interphases on mechanical properties and thermal shock resistance of CF/ZrB2-SiCBN

S. Dong, Cheng Fang, Xinghong Zhang, 2022, Journal of the European Ceramic Society.

Influence of hydrothermal carbon coating on the properties of CF/ZrB2/SiBCN prepared by slurry injection

Xinghong Zhang, S. Dong, Cheng Fang, 2021 .

Simultaneous in situ and ex situ growth of ultra-long Si3N4 nanobelts with different optical properties

Yuan Cheng, Minglun Li, S. Dong, 2016 .

Oxidation behavior and ablation mechanism of Cf/ZrB2-SiC composite fabricated by vibration-assisted slurry impregnation combined with low-temperature hot pressing

Xinghong Zhang, Dongyang Zhang, S. Dong, 2019 .

Effect of SiC Content on the Ablation and Oxidation Behavior of ZrB2-Based Ultra High Temperature Ceramic Composites

Xinghong Zhang, Yang Yang, S. Dong, 2013, Materials.

Critical role of C/SiO2 composite coating in enhancing the mechanical and antioxidation properties of 3D needled carbon fibers

Xinghong Zhang, C. Hong, H. Qian, 2021 .

In Situ Growth of Core-Sheath Heterostructural SiC Nanowire Arrays on Carbon Fibers and Enhanced Electromagnetic Wave Absorption Performance.

Xinghong Zhang, C. Hong, Dongyang Zhang, 2017, ACS applied materials & interfaces.

Designable synthesis of core-shell SiCw@C heterostructures with thickness-dependent electromagnetic wave absorption between the whole X-band and Ku-band

Jiecai Han, Xinghong Zhang, S. Dong, 2018, Chemical Engineering Journal.

Carbon Nanofiber Arrays Grown on Three-Dimensional Carbon Fiber Architecture Substrate and Enhanced Interface Performance of Carbon Fiber and Zirconium Carbide Coating.

Jiecai Han, Dongyang Zhang, Xinghong Zhang, 2017, ACS applied materials & interfaces.

Precursor infiltration and pyrolysis cycle-dependent microwave absorption and mechanical properties of lightweight and antioxidant carbon fiber felts reinforced silicon oxycarbide composites.

Jiecai Han, Xinghong Zhang, C. Hong, 2020, Journal of colloid and interface science.

Construction of MnO nanoparticles anchored on SiC whiskers for superior electromagnetic wave absorption.

Jiecai Han, Xinghong Zhang, Xiutao Li, 2020, Journal of colloid and interface science.

Synthesis and characterization of ultralong SiC nanowires with unique optical properties, excellent thermal stability and flexible nanomechanical properties

Xinghong Zhang, S. Dong, Kaixuan Gui, 2017, Scientific Reports.

Achieving Excellent Electromagnetic Wave Absorption Capabilities by Construction of MnO Nanorods on Porous Carbon Composites Derived from Natural Wood via a Simple Route

Jiecai Han, Xinghong Zhang, Peitao Hu, 2019, ACS Sustainable Chemistry & Engineering.

Facile synthesis of silicon nitride nanowires with flexible mechanical properties and with diameters controlled by flow rate

Yuan Cheng, Xinghong Zhang, S. Dong, 2017, Scientific Reports.

Size dependence of optical and mechanical properties of Si3N4 nanobelts controlled by flow rates

Yuan Cheng, Xinghong Zhang, Dongyang Zhang, 2016 .

Ultra-long SiC nanowires synthesized by a simple method

Xinghong Zhang, S. Dong, Kaixuan Gui, 2015 .

Strong and thermostable hydrothermal carbon coated 3D needled carbon fiber reinforced silicon-boron carbonitride composites with broadband and tunable high-performance microwave absorption.

Xinghong Zhang, C. Hong, Chen Liu, 2020, Journal of colloid and interface science.

SiC whiskers-reduced graphene oxide composites decorated with MnO nanoparticles for tunable microwave absorption

Jiecai Han, Xinghong Zhang, Xiutao Li, 2020 .

Medium and high-entropy transition mental disilicides with improved infrared emissivity for thermal protection applications

Yuan Cheng, W. Han, S. Dong, 2022, Journal of Materials Science & Technology.

A multiscale hierarchical architecture of a SiC whiskers–graphite nanosheets/polypyrrole ternary composite for enhanced electromagnetic wave absorption

Jiecai Han, Xinghong Zhang, S. Dong, 2018 .

Multiscale model construction and modulus prediction of needle-punched carbon/carbon composites

Hai-tao Zhao, S. Dong, Yahui Peng, 2023, Polymers and Polymer Composites.

Fabrication of tungsten oxide microfibers with photocatalytic activity by electrospunning from PVA/H3PW12O40 gel

Guangdong Zhou, Jian Gong, Chunhong Sui, 2011 .

Effects of scratching directions on AFM-based abrasive abrasion process

Tao Sun, Yingchun Liang, Yongda Yan, 2009 .

Nanobending of nanowires: A molecular dynamics study

W. Fei, T. Sun, Yongda Yan, 2008 .

Molecular dynamics simulation of subsurface deformed layers in AFM-based nanometric cutting process

Tao Sun, Yingchun Liang, Yongda Yan, 2008 .

3D force components measurement in AFM scratching tests

Tao Sun, Shun Dong, T. Sun, 2005 .

Dual bionics of structure and preparation: Gradient architectured carbon/ceramic composite as light as water but bearing ultra-high temperature max to 2500 °C

Jiecai Han, Yuan Cheng, Xinghong Zhang, 2023, Composites Part B: Engineering.

Fabrication of millimeter scale nanochannels using the AFM tip-based nanomachining method

Tao Sun, Yingchun Liang, Yongda Yan, 2013 .

In Situ Growth of Core-Sheath Heterostructural SiC Nanowire Arrays on Carbon Fibers and Enhanced Electromagnetic Wave Absorption Performance.

Xinghong Zhang, C. Hong, Dongyang Zhang, 2017, ACS applied materials & interfaces.

Lightweight zirconium modified carbon–carbon composites with excellent microwave absorption and mechanical properties

C. Hong, S. Dong, Guiqi Chen, 2024, Composites Part A: Applied Science and Manufacturing.

Development of Parallel Grinding System of Aspheric Optics

S. Dong, Fei-hu Zhang, L. Li, 2007 .

Fabrication and measurement of nanostructures on the micro ball surface using a modified atomic force microscope.

T Sun, Xuesen Zhao, Yongda Yan, 2012, The Review of scientific instruments.

Multifunctional Carbon Fiber Reinforced C/SiOC Aerogel Composites for Efficient Electromagnetic Wave Absorption, Thermal Insulation, and Flame Retardancy.

C. Hong, S. Dong, Dongdong Yang, 2023, Small.