Wonbaek Kim

发表

Catalytic properties of Ni-Zn alloy prepared by mechanical alloying for steam reforming from methanol

Jeshin Park, Sangbae Kim, Wonbaek Kim, 2012, Metals and Materials International.

Enrichment of the metallic components from waste printed circuit boards by a mechanical separation process using a stamp mill.

Jinki Jeong, Kyoungkeun Yoo, Jae-chun Lee, 2009, Waste management.

Changes of Getter properties by Crystallization of Amorphous Zr-V-Ti alloy Powders

Jeshin Park, Wonbaek Kim, J. Baek, 2007 .

Effects of Ball Milling on the Hydrogen Sorption Properties of Zr 57 V 36 Fe 7 Getter Alloy

Jeshin Park, Wonbaek Kim, Chang-Youl Suh, 2006 .

Nanosize Particles of ZrVFe Alloy by Pulsed Laser Ablation in Ethanol

D. Kil, H. Jang, Wonbaek Kim, 2005 .

Activation and Gas Sorption Properties of Nano-Size Titanium Powder Getters

Jeshin Park, Wonbaek Kim, Chang-Youl Suh, 2007 .

(Ti,W)C–Ni cermet prepared by high-energy ball milling and subsequent carbothermal reduction of TiO2–Ti–WO3–C mixture

D. Kil, K. Roh, Wonbaek Kim, 2014 .

Properties and rapid consolidation of nanostructured NiTi by pulsed current activated sintering

Jeshin Park, Wonbaek Kim, Sung-Wook Cho, 2011 .

Ti-based solid solution carbonitrides prepared from Ti-alloy scraps via a hydrogenation-dehydrogenation process and high-energy milling

K. Roh, Wonbaek Kim, H. Kwon, 2015, Metals and Materials International.

Microstructure and mechanical properties of (Ti,W)C–Ni cermet prepared using a nano-sized TiC–WC powder mixture

Wonbaek Kim, H. Kwon, Chang-yul Suh, 2015 .

Preparation of a highly toughened (Ti,W)C-20Ni cermet through in situ formation of solid solution and WC whiskers

Wonbaek Kim, H. Kwon, Chang-yul Suh, 2015 .

Size-controlled synthesis of Fe–Ni alloy nanoparticles by hydrogen reduction of metal chlorides

Hankwon Chang, H. Jang, Wonbaek Kim, 2006 .

The Activation and Hydrogen Sorption Characteristics of Zr57V36Fe7 Alloy and its Constituent Phases

Jeshin Park, Wonbaek Kim, Chang-Youl Suh, 2007 .

The effect of ball milling on the mechanical properties of TiN consolidated by pulsed current activated sintering

K. Roh, Wonbaek Kim, Jaewon Lim, 2013 .

Rapid consolidation of nanocrystalline Ti3Al-Al2O3 composites from mechanically synthesized powders by high frequency induction heated sintering

Wonbaek Kim, S. Oh, Sung-Wook Cho, 2011 .

Mechanical Synthesis and Rapid Consolidation of Nanocrystalline TiAl-Al2O3 Composites by High Frequency Induction Heated Sintering

Wonbaek Kim, Sung-Wook Cho, I. Shon, 2011 .

Simultaneous synthesis and consolidation of nanostructured 1.5Ti-Al2O3 from mechanically activated powders by high-frequency induction heating

Sung-tag Oh, Jeshin Park, Wonbaek Kim, 2009 .

Preparation of Titanium-Chromium Nitride by Gas Nitriding of the Explosion Products of Cr-Coated Ti Wire

Taegong Ryu, Jeshin Park, Sujeong Lee, 2011 .

Hydrogen Sorption in Zirconium and Relevant Surface Phenomena

Jeshin Park, Wonbaek Kim, Miso Won, 2007 .

The effect of Sc addition on the hydrogen storage capacity of Ti0.32Cr0.43V0.25 alloy

K. Roh, Wonbaek Kim, Sung-Wook Cho, 2014 .

Effect of particle size and microstructure on the hydrogen storage property in a V–Ti–Cr solid solution system

K. Roh, Wonbaek Kim, Sung-Wook Cho, 2012 .

Recovery of Platinum and Palladium from the Spent Petroleum Catalysts by Substrate Dissolution in Sulfuric Acid

Jae-chun Lee, Eunyoung Kim, Wonbaek Kim, 2010 .

Mechanical properties of (Ti,V)C–Ni composite prepared using ultrafine solid-solution (Ti,V)C phase

K. Roh, Wonbaek Kim, H. Kwon, 2014 .

Stability Domains of NbC and Nb(CN) During Carbothermal Reduction of Niobium Oxide

Wonbaek Kim, Jiwoong Kim, H. Kwon, 2015 .

Getter Properties of Ti 80-X Zr 20 V X Alloy Powders

Jeshin Park, Wonbaek Kim, Sung-Wook Cho, 2009 .

The effect of graphene reinforcement on the mechanical properties of Al2O3 ceramics rapidly sintered by high-frequency induction heating

Wonbaek Kim, I. Shon, Hyun-Su Oh, 2015 .

Cu–Ni–P alloy nanoparticles prepared by electrical wire explosion

Jong-gwan Ahn, Jeshin Park, Wonbaek Kim, 2008 .

The Selective Leaching of Al-Ni Alloy Nano Powders Prepared by Electrical Wire Explosion

Jong-gwan Ahn, Hankwon Chang, Jeshin Park, 2008 .

Fabrication of Porous Nano Particles from Al-Cu Alloy Nano Powders Prepared by Electrical Wire Explosion

Jong-gwan Ahn, Jeshin Park, Wonbaek Kim, 2008 .

Ag-Cu Powders Prepared by Electrical Wire Explosion of Cu-plated Ag Wires

Jeshin Park, Wonbaek Kim, Chang-Youl Suh, 2007 .

Fabrication of alloy nanopowders by the electrical explosion of electrodeposited wires

Hankwon Chang, Jeshin Park, Wonbaek Kim, 2007 .

A New Method for the Production of Alloy Nanoparticles by Electrical Wire Explosion

Jeshin Park, Y. Oh, Wonbaek Kim, 2007 .

Cu-Ni-P Alloy Nano Powders Prepared by Electrical Wire Explosion

Jeshin Park, Y. Oh, Wonbaek Kim, 2007 .

Fabrication of Cu-Zn Alloy Nano Powders by Wire Explosion of Electrodeposited Wires

Jeshin Park, Y. Oh, Wonbaek Kim, 2007 .

(Ti,Cr)C Synthesized In Situ by Spark Plasma Sintering of TiC/Cr3C2 Powder Mixtures

Wonbaek Kim, H. Kwon, Sun-a Jung, 2015 .

Electrical Wire Explosion of Cr-Coated Ti Wire in N2 Gas

Taegong Ryu, Jeshin Park, Sujeong Lee, 2010 .

Synthesis of TiN Nanoparticles by Explosion of Ti Wire in Nitrogen Gas

Jeshin Park, Sujeong Lee, Wonbaek Kim, 2009 .

Mechanical properties of nanostructured TiN–AlN composites rapidly consolidated by pulsed current activated sintering

Wonbaek Kim, Jaewon Lim, I. Shon, 2014 .

Recovery of H2SO4 from waste acid solution by a diffusion dialysis method.

Byung-Su Kim, Jinki Jeong, Jae-chun Lee, 2005, Journal of hazardous materials.

Mechanical properties of (W, Ti)C and (W, Ti)C–NiAl3 cermet consolidated by the high-frequency induction-heating method

K. Roh, Wonbaek Kim, Sung-Wook Cho, 2013 .

High-frequency induction heated sintering of High-energy ball milled TiC0.5N0.5 powders and mechanical properties of the sintered products

K. Roh, Sujeong Lee, Wonbaek Kim, 2013 .

Mechanochemical synthesis and high-frequency induction heated consolidation of nanostructured Ti5Si3 and its mechanical properties

Wonbaek Kim, Sung-Wook Cho, Jaewon Lim, 2013, Research on Chemical Intermediates.

Properties and Rapid Consolidation of Nanocrystalline TiCo Compounds by High-Frequency Induction Heated Sintering

Wonbaek Kim, Sung-Wook Cho, I. Shon, 2011 .

Microstructure of Ti-Cr Nanoparticles Prepared by Electrical Wire Explosion

Jeshin Park, Sujeong Lee, Wonbaek Kim, 2011 .

Rapid consolidation of nanostructured Ti from mechanically activated Ti and TiH2 by pulsed-current activated sintering, and the mechanical properties of the product

Wonbaek Kim, Sung-Wook Cho, I. Shon, 2011 .

Rapid Consolidation of Nanostructured TiCu Compound by High Frequency Induction Heating and Its Mechanical Properties

Wonbaek Kim, Sung-Wook Cho, I. Shon, 2010 .

Mechanical Properties and Fabrication of TiAl Alloy by Pulsed Current Activated Sintering

Wonbaek Kim, Sung-Wook Cho, I. Shon, 2010 .

Stability domains of Nb(CN) during the carburization/nitridation of metallic niobium

Wonbaek Kim, Jiwoong Kim, H. Kwon, 2014 .

Bulk (Ti,Cr)N consolidated by pulsed current activated sintering and its mechanical properties

K. Roh, Sujeong Lee, Wonbaek Kim, 2013 .

Stability domains of (Ti,W)C and (Ti,W)(CN) during carbothermal reduction of TiO 2/WO3 mixture at 1500 K

Wonbaek Kim, Jiwoong Kim, H. Kwon, 2017 .

Preparation of Ti-Mo-Si alloy powders with enhanced high-temperature oxidation resistance using Ti-10Mo scraps

K. Roh, Wonbaek Kim, Chang-Youl Suh, 2015, Metals and Materials International.

Ti-Cr Nanoparticles Prepared by Electrical Wire Explosion

Jeshin Park, Sujeong Lee, Wonbaek Kim, 2009 .

Rapid Consolidation of TiN–Cr2N–(Ti,Cr)N Nanoparticles Using Pulsed Current Activated Sintering and the Mechanical Properties of Sintered Product

K. Roh, Wonbaek Kim, Jaewon Lim, 2012 .

Fabrication of nanopowder and consolidation of nanocrystalline 5Ni0.6Fe0.4-Al2O3 composite by rapid sintering

Jeshin Park, Wonbaek Kim, I. Shon, 2009 .

Oxygen behavior during non-contact deoxidation of titanium powder using calcium vapor

Wonbaek Kim, Jung-Min Oh, Jaewon Lim, 2014 .

In situ martensitic phase reinforced Fe-Nb-Ni-Mn ultrafine composite with enhanced mechanical properties

Tae Eung Kim, J. M. Park, J. Eckert, 2012 .

Fabrication of Nanostructured Ti from Ti and TiH2 by Rapid Sintering and Its Mechanical Properties

Wonbaek Kim, Sung-Wook Cho, I. Shon, 2012 .

Investigation of the conditions required for the formation of (Ti,W)(CN) during carburization of titanium under nitrogen

Wonbaek Kim, Jiwoong Kim, H. Kwon, 2017 .

Modeling on the Counteractive Facilitated Transport of Co in Co–Ni Mixtures by Hollow-Fiber Supported Liquid Membrane

Jae-chun Lee, Wonbaek Kim, Jinki Jeong, 2003 .

Preparation of low oxygen content alloy powder from Ti binary alloy scrap by hydrogenation–dehydrogenation and deoxidation process

K. Roh, Wonbaek Kim, Chang-Youl Suh, 2014 .

Premixed TiC–Ni composite powder prepared by mechanical milling of Ti–Ni alloy/graphite mixture and subsequent heat treatment

D. Kil, K. Roh, Wonbaek Kim, 2014 .

Comparison of deoxidation capability for preparation of low oxygen content powder from TiNi alloy scraps

K. Roh, Wonbaek Kim, Chang-Youl Suh, 2014 .

Simultaneous synthesis and consolidation of a nanostructured 4 FeAl 2 O 3 composite from mechanically activated powders by high frequency induction heated sintering

Jeshin Park, Wonbaek Kim, I. Shon, 2009 .

The Effect of Oxygen on the Sintering of Titanium Powders

D. Kil, Wonbaek Kim, Chang-Youl Suh, 2000 .

Preparation of a fine-structured TiC–Co composite by high-energy milling and subsequent heat treatment of a Ti–Co alloy

Wonbaek Kim, Jung-Min Oh, H. Kwon, 2015 .

Highly toughened dense TiC–Ni composite by in situ decomposition of (Ti,Ni)C solid solution

K. Roh, Wonbaek Kim, Jiwoong Kim, 2015 .