Y. Ke

发表

Use of nitrogen gas in high-speed milling of Ti-6Al-4V

Gang-yu Liu, Y. Ke, HuiYue Dong, 2009 .

Experimental Studies of Cutting Temperature during High-Speed Milling of Aerospace Aluminum

H. Wu, Y. Ke, HuiYue Dong, 2008 .

RESEARCH ON DIRECT EXTRACTION OF BOUNDARY FROM POINT CLOUDS

Yinglin Ke, Y. Ke, 2004 .

Hole diameter variation and roundness in dry orbital drilling of CFRP/Ti stacks

Yinglin Ke, Huiyue Dong, Kaiye Gao, 2016 .

Design and analysis of the mandrel structure for a composite S-shaped inlet

Y. Ke, Hao Li, Junxia Jiang, 2021, Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering.

A Force Sensorless Method for CFRP/Ti Stack Interface Detection during Robotic Orbital Drilling Operations

Bing Han, Y. Ke, B. Han, 2015 .

Factor analysis of machining parameters of fiber-reinforced polymer composites based on finite element simulation with experimental investigation

Yinglin Ke, Jiuhua Xu, Chongyang Gao, 2016 .

Deformation and fracture mechanisms of automated fiber placement pre-preg laminates under out-of-plane tensile loading

Qiang Xu, Y. Ke, Weizhu Zhou, 2021 .

Numerical research on multi-particle movements and nozzle wear involved in abrasive waterjet machining

Y. Ke, HuiYue Dong, Haijin Wang, 2021, The International Journal of Advanced Manufacturing Technology.

Numerical research on kerf characteristics of abrasive waterjet machining based on the SPH-DEM-FEM approach

Y. Ke, HuiYue Dong, Haijin Wang, 2020, The International Journal of Advanced Manufacturing Technology.

Strengthening of composite T-joints using Ø 0.11 mm Z-pins via an ultrasound-guided insertion process

Y. Ke, Haijin Wang, Shaohua Fei, 2022, Composites Part C: Open Access.

Algorithms for Constructing Initial and Offset Path of Automated Fiber Placement for Complex Double-Curved Surfaces

Qiang Yang, Y. Ke, Weiwei Qu, 2021, Applied Composite Materials.

Modified Fourier–Galerkin Solution for Aerospace Skin-Stiffener Panels Subjected to Interface Force and Mixed Boundary Conditions

Y. Ke, Jiangxiong Li, Qing Wang, 2019, Materials.

Concurrent multiscale modeling of in-plane micro-damage evaluation in Z-pinned composite laminates

Weiwei Wang, Y. Ke, HuiYue Dong, 2022, Composite Structures.

Design and optimization of composite sub-stiffened panels

Qiang Xu, Y. Ke, Junxia Jiang, 2020 .

Effect of Ø 0.11 mm Z-pinning on the properties of composite laminates via an ultrasound guided insertion process

Weiwei Wang, Y. Ke, Fei Shaohua, 2021 .

Process-dependent wrinkle formation for steered tow during automated fiber placement: Modeling and experimental verification

Y. Ke, Jiangxiong Li, Weiwei Qu, 2022, Thin-Walled Structures.

Design and Optimization of Variable Stiffness Composite Cylinders With the Consideration of Manufacturing Interaction

Y. Ke, Q. Huang, Jiangxiong Li, 2022, Applied Composite Materials.

Optimization of the curing cycle for the large-scale composite stiffened panel based on the response surface methodology and Fgoalattain algorithm

Hao Li, Y. Ke, Xiaowen Song, 2022, Journal of Composite Materials.

Computational modelling of postbuckling behavior of composite T-stiffened panels with different bonding methods

Qiang Xu, Y. Ke, Junxia Jiang, 2019, Composites Part B: Engineering.

An off-line programming system for robotic drilling in aerospace manufacturing

Y. Ke, Wei-dong Zhu, Weiwei Qu, 2013, The International Journal of Advanced Manufacturing Technology.

A semi-supervised deep learning approach for circular hole detection on composite parts

Y. Ke, Wei-dong Zhu, Siming Cao, 2020, The Visual Computer.

Characterization of electrohydrodynamic flow in a plate-plate electrostatic precipitator with a wire-cylinder pre-charger by data-driven vortex and residence time analysis

Y. Ke, Shuran Li, Wei-dong Zhu, 2021, Powder Technology.

Prediction of the Temperature of Large Framed Mold and Curing Deformation of Composite Components in the Autoclave Process

Y. Ke, Anan Zhao, Qing Wang, 2022, Advances in Materials Science and Engineering.

An efficient thermal cure profile design method for autoclave curing of large size mold

Y. Ke, Haijin Wang, Han Wang, 2021, The International Journal of Advanced Manufacturing Technology.

Greedy-based approach for generating anisotropic random fiber distributions of unidirectional composites and transverse mechanical properties prediction

Y. Ke, Shuran Li, Wei-dong Zhu, 2023, Computational Materials Science.

Machine learning and materials informatics approaches for predicting transverse mechanical properties of unidirectional CFRP composites with microvoids

Y. Ke, Shuran Li, Wei-dong Zhu, 2022, Materials & Design.

A physically-based plastic constitutive model considering nanoparticle cluster effect for metal matrix nanocomposites

Xiaochun Li, Lianyi Chen, Y. Ke, 2015 .

The turbulent-flow-assisted electrostatic collection and alignment of recycled short-chopped carbon fiber in gaseous phase

Shuo Zhang, Y. Ke, Shuran Li, 2023, Separation and Purification Technology.

Constitutive modeling of two-phase metallic composites with application to tungsten-based composite 93W–4.9Ni–2.1Fe

Y. Ke, C. Y. Gao, W. Lu, 2014 .

Deformation-based freeform feature reconstruction in reverse engineering

Yinglin Ke, Qing Wang, Jiangxiong Li, 2008 .

Placement suitability analysis of automated fiber placement on curved surfaces considering the influence of prepreg tow, roller and AFP machine

Yinglin Ke, Weiwei Qu, Ruming He, 2021 .

Translaminar enveloping ply for CFRP interlaminar toughening

Y. Ke, Wei-dong Zhu, Qiang Xu, 2022, Composites Part B: Engineering.

A distance regularization scheme for topology optimization with parametric level sets using cut elements

Y. Ke, Wei-dong Zhu, Jiangxiong Li, 2022, Structural and Multidisciplinary Optimization.

Structural topology optimization using a level set method with finite difference updating scheme

Yinglin Ke, Jiangxiong Li, Weidong Zhu, 2021, Structural and Multidisciplinary Optimization.

Analysis and modeling of the Z‐pin insertion in prepreg based on contact mechanism

Y. Ke, Shaohua Fei, Jiangxiong Li, 2021, Polymer Composites.

Study on Machining Deformation of Aircraft Monolithic Component by FEM and Experiment

Y. Ke, HuiYue Dong, Hui-yue Dong, 2006 .

Modeling the effect of automated fiber placement induced gaps based on serial layer scanned point clouds

Y. Ke, Ye Hu, Weiwei Wang, 2023, Composite Structures.

An in-process inspection method integrating deep learning and classical algorithm for automated fiber placement

Y. Ke, Jiangxiong Li, Qing Wang, 2022, Composite Structures.

A novel 3D laser scanning defect detection and measurement approach for automated fibre placement

Yinglin Ke, Jiangxiong Li, Yipeng Tang, 2021, Measurement Science and Technology.

Machining distortion prediction of aerospace monolithic components

Yinglin Ke, Huiyue Dong, Yunbo Bi, 2009 .

Hole diameter variation and roundness in dry orbital drilling of CFRP/Ti stacks

Zupeng Chen, Y. Ke, HuiYue Dong, 2016, The International Journal of Advanced Manufacturing Technology.

Investigation on insertion mechanism of ultrasound guided insertion process based on numerical simulation

Y. Ke, Shaohua Fei, Jiangxiong Li, 2022, Polymer Composites.

A mechanistic predictive model for ultrasound guided insertion process of Ø 0.11 mm Z-pins

Y. Ke, Shaohua Fei, Jiangxiong Li, 2022, Composite Structures.

Dynamic plasticity of AZ31 magnesium alloy: Experimental investigation and constitutive modeling

Liangchi Zhang, Wei-guo Guo, Y. Ke, 2014 .

A novel model of Z-pin insertion in prepreg based on fracture mechanics

Y. Ke, Shaohua Fei, Jiangxiong Li, 2021 .

A semi-supervised deep learning approach for circular hole detection on composite parts

Yinglin Ke, Guanhua Li, Siming Cao, 2020, The Visual Computer.

Investigation on the compressive mechanical properties of ultra-thick CFRP laminates

Jian Wang, Y. Ke, Y. Bi, 2022, International Journal of Mechanical Sciences.

An efficient thermal cure profile design method for autoclave curing of large size mold

Y. Ke, Haijin Wang, Han Wang, 2021 .

Influence of Large Framed Mold Placement in Autoclave on Heating Performance

Y. Ke, Haijin Wang, Han Wang, 2020, Applied Composite Materials.

Optimization of cure profile for thick composite parts based on finite element analysis and genetic algorithm

Y. Ke, Qiang Xu, Wei-dong Zhu, 2018 .

Design optimization of molds for autoclave process of composite manufacturing

Qiang Xu, Weidong Zhu, Yinglin Ke, 2017 .

On the static and dynamic properties of fiber-reinforced polymer composites

Liang Zhang, Y. Ke, Jianzhang Xiao, 2017 .

An adaptive activation energy method for predicting resin curing behavior and thermal overshoot in thick CFRP plates

Hao Li, Y. Ke, Ya-nan Ye, 2023, Polymer Composites.

Two-Stage Sector Partition Path Planning Method for Automated Fiber Placement on Complex Surfaces

Weidong Zhu, Di Yang, Yinglin Ke, 2020, Comput. Aided Des..

Automated fiber placement path generation method based on prospective analysis of path performance under multiple constraints

Qian Yang, Yinglin Ke, Di Yang, 2021 .

Out-of-plane tensile failure behavior of fiber reinforced composites due to lay-up temperature induced intra-ply and inter-ply voids

Qiang Xu, Y. Ke, Weizhu Zhou, 2021 .

Measurement, identification, and compensation of pose errors for six-axis gantry automated fiber placement machine

Y. Ke, Jiangxiong Li, Liang Cheng, 2022, The International Journal of Advanced Manufacturing Technology.

Compaction pressure distribution and pressure uniformity of segmented rollers for automated fiber placement

Y. Ke, Junxia Jiang, Weiwei Qu, 2021, Journal of Reinforced Plastics and Composites.

Modeling and compensation of volumetric errors for a six-axis automated fiber placement machine based on screw theory

Yinglin Ke, Li Zhang, Liang Cheng, 2021, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.

Modeling and experimental validation of compaction pressure distribution for automated fiber placement

Y. Ke, Junxia Jiang, Han Wang, 2021, Composite Structures.

Kinematic modeling and parameter identification for a heavy gantry-type automated fiber placement machine considering gravity deformation

Jiangxiong Li, Jianbo Wu, Yinglin Ke, 2020 .

Pressure distribution for automated fiber placement and design optimization of compaction rollers

Y. Ke, Junxia Jiang, Yuxiao He, 2019, Journal of Reinforced Plastics and Composites.

Development of a monocular vision system for robotic drilling

Y. Ke, Biao Mei, Weidong Zhu, 2014, Journal of Zhejiang University SCIENCE C.

A multi-object posture coordination method with tolerance constraints for aircraft components assembly

Yifan Zhang, Yinglin Ke, Qing Wang, 2019, Assembly Automation.

High‐fidelity random fiber distribution algorithm based on fiber spreading process

Y. Ke, Shuran Li, Mengze Li, 2023, Polymer Composites.

Generation of random fiber distributions in fiber reinforced composites based on Delaunay triangulation

Weiwei Wang, Y. Ke, HuiYue Dong, 2021 .

Pose error compensation based on joint space division for 6-DOF robot manipulators

Y. Ke, Haijin Wang, Q. Cheng, 2021, Precision Engineering.

Pose alignment of aircraft structures with distance sensors and CCD cameras

Yinglin Ke, Weidong Zhu, Hua Liu, 2017 .

A new elliptic contour extraction method for reference hole detection in robotic drilling

Y. Ke, Wei-dong Zhu, Biao Mei, 2015, Pattern Analysis and Applications.

Uncertainty evaluation and optimization of INS installation measurement using Monte Carlo Method

Yinglin Ke, Qing Wang, Peng Huang, 2015 .

A zigzag path based joining method for fuselage panels in digital assembly

Yinglin Ke, Qing Wang, Jiangxiong Li, 2015 .

Modeling of the cutting front profile in abrasive water jet machining based on the energy balance approach

Y. Ke, HuiYue Dong, Haijin Wang, 2022, Precision engineering.

A manta-ray-inspired bionic curing mold for autoclave process of composite manufacturing

Hao Li, Y. Ke, Qiang Xu, 2022, Journal of Reinforced Plastics and Composites.

Numerical research on multi-particle movements and nozzle wear involved in abrasive waterjet machining

Y. Ke, HuiYue Dong, Haijin Wang, 2021, The International Journal of Advanced Manufacturing Technology.

Spatially discretised compensation method for coordinate transformation in large-scale metrology under nonuniform temperature field

Y. Ke, Anan Zhao, Qing Wang, 2022, Measurement Science and Technology.

Autofocus for Enhanced Measurement Accuracy of a Machine Vision System for Robotic Drilling

Yinglin Ke, Weidong Zhu, Biao Mei, 2017 .

Prediction of double-sided arc welding deformation based on dynamic heat distribution model and TEP-FE approach

Y. Ke, HuiYue Dong, Haijin Wang, 2022, The International Journal of Advanced Manufacturing Technology.

Distortion Prediction of Aerospace Monolithic Components due to Milling Process

Yunbo Bi, Y. Ke, HuiYue Dong, 2008 .

An improved path discretization method for automated fiber placement

Y. Ke, Weiwei Qu, Ruming He, 2020 .

Analytical and experimental study on deformation of thin-walled panel with non-ideal boundary conditions

Yinglin Ke, Jiangxiong Li, Renluan Hou, 2018, International Journal of Mechanical Sciences.

An efficient error compensation method for coordinated CNC five-axis machine tools

Dan Zhao, Yinglin Ke, Yunbo Bi, 2017 .

Positioning error compensation on two-dimensional manifold for robotic machining

Yinglin Ke, Huiyue Dong, Guanhua Li, 2019, Robotics Comput. Integr. Manuf..

Attractive Fixture System Based on Magnetic Field and Friction Force for Numerically Controlled Machining of Paper Honeycomb Core

Gang Liu, Yinglin Ke, Y. Ke, 2005 .

Thickness Variation Effect on the Compressive Properties of Ultra-Thick Cfrp Laminates

Y. Ke, Xiaowen Song, Huiming Ding, 2023, SSRN Electronic Journal.

A helical milling and oval countersinking end-effector for aircraft assembly

Yinglin Ke, Huiyue Dong, Weidong Zhu, 2017 .

Influence of fiber cutting at the composite grid intersection on the compressive performance of laminate

Y. Ke, Haijin Wang, Xiaowen Song, 2021, Composite Structures.

A stabilized parametric level‐set XFEM topology optimization method for thermal‐fluid problem

Y. Ke, Wei-dong Zhu, Jiangxiong Li, 2021, International Journal for Numerical Methods in Engineering.

Early chatter identification of robotic boring process using measured force of dynamometer

Y. Ke, HuiYue Dong, Guifeng Wang, 2017, The International Journal of Advanced Manufacturing Technology.

Early chatter identification of robotic boring process using measured force of dynamometer

Yinglin Ke, Huiyue Dong, Guifeng Wang, 2018 .

Chatter mechanism and stability analysis of robotic boring

Yinglin Ke, Huiyue Dong, Guifeng Wang, 2017 .

Dynamic cutting force modeling and experimental study of industrial robotic boring

Yinglin Ke, Huiyue Dong, Guifeng Wang, 2016 .

Vibration analysis and suppression in robotic boring process

Yinglin Ke, Huiyue Dong, Guifeng Wang, 2016 .

Dynamic cutting force modeling and experimental study of industrial robotic boring

Y. Ke, HuiYue Dong, Guifeng Wang, 2015, The International Journal of Advanced Manufacturing Technology.

Finite element simulation and experimental analysis of robotic boring based on an approach of equivalent stiffness

Yinglin Ke, Huiyue Dong, Guifeng Wang, 2018 .

An algorithm for automatically establishing a multi- parameter RVE model for z-pin composite laminates

Y. Ke, Di Yang, Xiaowen Song, 2023, Composite Structures.

An off-line programming system for robotic drilling in aerospace manufacturing

Weidong Zhu, Yinglin Ke, Di Yang, 2013 .

Influence of the deformation of riveting-side working head on riveting quality

Heng Li, Yinglin Ke, Huiyue Dong, 2019, The International Journal of Advanced Manufacturing Technology.

Effect of riveting parameters on the quality of riveted aircraft structures with slug rivet

Yinglin Ke, Jiangxiong Li, Yunbo Bi, 2017 .

Stiffness-oriented performance indices defined on two-dimensional manifold for 6-DOF industrial robot

Weidong Zhu, Huiyue Dong, Yinglin Ke, 2021, Robotics Comput. Integr. Manuf..

Stiffness-oriented posture optimization in robotic machining applications

Yinglin Ke, Huiyue Dong, Yingjie Guo, 2015 .

Propagation analysis of variation for fuselage structures in multi-station aircraft assembly

Qing Wang, Yinglin Ke, Jiangxiong Li, 2018 .

Computational modeling of micro curing residual stress evolution and out-of-plane tensile damage behavior in fiber-reinforced composites

Y. Ke, Mengze Li, Qing Wang, 2023, Composite Structures.

A deep learning convolutional neural network and multi-layer perceptron hybrid fusion model for predicting the mechanical properties of carbon fiber

Y. Ke, Y. Pei, Shuran Li, 2023, Materials & Design.

Kinematic modeling and parameter identification of a new circumferential drilling machine for aircraft assembly

Weidong Zhu, Yinglin Ke, Biao Mei, 2014 .

Sensor-Based Control Using an Image Point and Distance Features for Rivet-in-Hole Insertion

Hua Liu, Yinglin Ke, Weidong Zhu, 2020, IEEE Transactions on Industrial Electronics.

Digital thread-based modeling of digital twin framework for the aircraft assembly system

Y. Ke, Qing Wang, Qiang Zhang, 2022, Journal of Manufacturing Systems.

Analysis and characterization of interlaminar tack for different prepreg materials during automated fiber placement

Y. Ke, Jiangxiong Li, Weiwei Qu, 2022, Polymer Composites.

Constrained fitting for 2D profile-based reverse modeling

Weidong Zhu, Yinglin Ke, Fengshan Liu, 2006, Comput. Aided Des..

Configuration Analysis of the ERS Points in Large-Volume Metrology System

Yinglin Ke, Jiangxiong Li, Zhangjun Jin, 2015, Sensors.

Pre-joining process planning model for a batch of skin–stringer panels based on statistical clearances

Gang Liu, Wei Tang, Yinglin Ke, 2015 .

Modeling of fast pre-joining processes optimization for skin-stringer panels

Gang Liu, Wei Tang, Yinglin Ke, 2014 .

Pre-joining processes optimization method for panel orienting to the clearances suppression of units and the clearances flow among units

Wei Tang, Yinglin Ke, Weiwei Qu, 2018 .

Numerical study on predicting and correcting assembly deformation of a large fuselage panel during digital assembly

Yinglin Ke, Bi Yunbo, Yan Weimiao, 2014 .

End stiffness modeling for automatic horizontal dual-machine cooperative drilling and riveting system

Yinglin Ke, Chen Bian, Junxia Jiang, 2019, The International Journal of Advanced Manufacturing Technology.

Positioning variation synthesis for an automated drilling system in wing assembly

Weidong Zhu, Yinglin Ke, Biao Mei, 2021, Robotics Comput. Integr. Manuf..

An adaptive ball-head positioning visual servoing method for aircraft digital assembly

Hua Liu, Yinglin Ke, Huiyue Dong, 2019, Assembly Automation.

Variation modeling and analysis with interval approach for the assembly of compliant aeronautical structures

Weidong Zhu, Yinglin Ke, Biao Mei, 2019 .

Positioning variation modeling for aircraft panels assembly based on elastic deformation theory

Qing Wang, Paul G. Maropoulos, Yinglin Ke, 2018 .

A new type of inner-side working head for automatic drilling and riveting system

Yinglin Ke, Chen Bian, Yunbo Bi, 2018, Assembly Automation.

A robotic boring system for intersection holes in aircraft assembly

Yinglin Ke, Guifeng Wang, Yingjie Guo, 2018, Ind. Robot.

A new method for automatic shaft-hole assembly of aircraft components

Yinglin Ke, Chen Bian, Junxia Jiang, 2017 .

Pre-joining processes optimization method for panel orienting to the clearances suppression of units and the clearances flow among units

Y. Ke, Wei Tang, Weiwei Qu, 2017, The International Journal of Advanced Manufacturing Technology.

Error Modeling and Compensation of Circular Motion on a New Circumferential Drilling System

Qiang Fang, Yu-Chao Li, Fei Shaohua, 2015 .

Measurement error analysis and accuracy enhancement of 2D vision system for robotic drilling

Weidong Zhu, Yinglin Ke, Guorui Yan, 2014 .

High-quality electrostatic recycling of waste carbon fiber via spark-driven shock waves and Joule heating

Y. Ke, Shuran Li, Wei-dong Zhu, 2023, Composites Part B: Engineering.

Evaluation of residual clearance after pre-joining and pre-joining scheme optimization in aircraft panel assembly

Yinglin Ke, Di Yang, Weiwei Qu, 2016 .

Electrostatic manipulation for saturated charging and orientating of recycled short-chopped carbon fibers based on dielectric polarization

Y. Ke, Shuran Li, Wei-dong Zhu, 2022, Journal of Cleaner Production.

A novel approach on recycling short-chopped carbon fibers by electric field induced manipulation

Y. Ke, Shuran Li, Wei-dong Zhu, 2022, Resources, Conservation and Recycling.

Topology recovery technique for complex freeform surface model after local geometry repair

Yinglin Ke, Keke Bian, Y. Ke, 2013 .

Reconstruction of symmetric models composed of analytic curves and surfaces from point cloud

Yinglin Ke, Weidong Zhu, Qing Wang, 2008 .

Quaternion-based placement orientation trajectory smoothing method under the Domain of Admissible Orientation

Y. Ke, Yingjie Guo, Weiwei Qu, 2023, The International Journal of Advanced Manufacturing Technology.

Error compensation based on surface reconstruction for industrial robot on two-dimensional manifold

Y. Ke, HuiYue Dong, Wei-dong Zhu, 2021, Ind. Robot.

Redundancy resolution of 9-DOF machine through synthesized global and local performance indices

Y. Ke, Yingjie Guo, Weiwei Qu, 2023, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.

Multi load-transmitting device based support layout optimization for large fuselage panels in digital assembly

Yinglin Ke, Yunbo Bi, Weimiao Yan, 2015 .

Development and experimental investigation of the narrow-gap coated electrostatic precipitator with a shield pre-charger for indoor air cleaning

Y. Ke, Shuran Li, Wei-dong Zhu, 2023, Separation and Purification Technology.