Kanji Ueda

发表

Chip Formation Mechanism in Microcutting of an Amorphous Metal

Kanji Ueda, K. Manabe, 1992 .

Chip Formation Mechanism in Single Crystal Cutting of β-Brass

Kazuaki Iwata, Kanji Ueda, Kazuo Nakayama, 1980 .

Fracture Mechanics Analysis of the Brittle Failure of Cutting Tools (1st Report)

Kanji Ueda, K. Iwata, T. Shibasaka, 1982 .

Material removal mechanism of silicon nitride during rubbing in water

Kanji Ueda, T. Sugita, Yutaka Kanemura, 1984 .

Analysis of Three-Dimensional Burr Formation in Oblique Cutting

David Dornfeld, Kanji Ueda, Masayuki Hashimura, 1995 .

Analysis of Brittle Failure of Cutting Tools Based on Fracture Mechanics

K. Okamura, Kanji Ueda, K. Iwata, 1983 .

3-Dimensional Simulation of Cutting Process by Dynamic-Explicit Elastic-Plastic FEM. Development of Simulation Method and Application to Turning Process.

Kanji Ueda, Keiji Manabe, Kanji Ueda, 2000 .

Application of Fracture Mechanics in Micro-Cutting of Engineering Ceramics

H. Tsuwa, Kanji Ueda, T. Sugita, 1983 .

Atomic scale level chip formation of amorphous metal investigated by using afm and MD-RPFEM simulation

Kanji Ueda, Keiji Manabe, Huinan Fu, 1999 .

Study on Micro-machining Mechanics Based on Direct SEM Observation (1st Report)

Kanji Ueda, K. Iwata, T. Shibasaka, 1977 .

Analysis of Burr Formation in Orthogonal Cutting.

David Dornfeld, Kanji Ueda, Masayuki Hashimura, 2000 .

Microcutting of amorphous metals - Chip formation mechanism of rapidly quenched Fe-base alloys.

Kanji Ueda, T. Sugita, A. Suda, 1987 .

A Combined Molecular Dynamics and Rigid-Plastic FEM Simulation of Atomic Level Cutting

Kanji Ueda, Kanji Ueda, Keiji Manabe, 1997, J. Robotics Mechatronics.

Rigid-Plastic FEM Analysis of Three-Dimensional Cutting Mechanism (2nd Report)

Kanji Ueda, Keiji Manabe, Kanji Ueda, 1996 .

Implicit-type Elastic-Plastic FEM Analysis of Cutting Mechanism (2nd Report)

Kanji Ueda, Keiji Manabe, Zongnan Huang, 1997 .