M. Tsutsumi

发表

Development of a new tool to generate compressive residual stress within a machined surface

H. Sasahara, T. Segawa, M. Tsutsumi, 2004 .

Helical Feed Milling with MQL for Boring of Aluminum Alloy

Masaomi Tsutsumi, Makoto Kawasaki, Hiroyuki Sasahara, 2008 .

Mathematical Model of Feed Drive Mechanical System and Friction for CNC Machine Tools.

Masaomi Tsutsumi, Kazuo Yamazaki, Yuichi Okazaki, 1995 .

Mathematical Model of Linear Motor Stage with Non-Linear Friction Characteristics

R. Sato, M. Tsutsumi, S. Kaneko, 2007 .

Measurement and Compensation of Corner-tracking Errors of CNC Machine Tools

Liang Chen, Masaomi Tsutsumi, M. Tsutsumi, 1996 .

Measurement Method of Geometric Accuracy of 5-axis Controlled Machining Centres : Effectiveness of Clause K6 of ISO 10791-6 and Its Application to Assessment of Geometric Accuracy

Masaomi Tsutsumi, Akinori Saito, Muditha Dassanayake, 2006 .

3344 Improvement of Response Characteristics of Linear Motor Servo Systems Using Virtual Friction

Masaomi Tsutsumi, Hiroshi Niwa, Hirofumi Itagaki, 2011 .

Deformation and interface pressure distribution of 1/10 tapered joints at high rotation speed

Masaomi Tsutsumi, Tojiro Aoyama, Soichi Hachiga, 1996 .

Development of Support System for Design of Parallel Mechanism Based Machine Tools. Analysis System of Working Space.

Masaomi Tsutsumi, Xiaoming Zhao, Satoru Kadowaki, 2001 .

Structural Configuration and Measurement of Geometric Deviation of 5-Axis Machining Centers

Masaomi Tsutsumi, Akinori Saito, Sisavath Souvannavong, 2002 .

Dynamic Synchronous Accuracy of Translational Axes and Rotational Axes in 5-axis Machining Center

Masaomi Tsutsumi, Ryuta Sato, Yuya Yokobori, 2006 .

Passing Encounters East and West: Comparing Japanese and American Pedestrian Interactions

Yuichi Iizuka, M. Patterson, Y. Iizuka, 2007 .

非線形摩擦特性をもつリニアモータステージの数学モデル(機械要素,潤滑,工作,生産管理など)

Masaomi Tsutsumi, Ryuta Sato, Satoshi Kaneko, 2009 .

Modeling and Controller Tuning Techniques for Feed Drive Systems

Masaomi Tsutsumi, Ryuta Sato, R. Sato, 2005 .

Identification Method of Geometric Deviations for Multi-Tasking Machine Tools Considering the Squareness of Translational Axes

Masaomi Tsutsumi, Keiichi Nakamoto, Noriyuki Kato, 2020, Applied Sciences.

Position error reduction of tool center point in multi-tasking machine tools through compensating influence of geometric deviations identified by ball bar measurements

Masaomi Tsutsumi, Keiichi Nakamoto, Yan Yao, 2021 .

Enhancement of geometric accuracy of five-axis machining centers based on identification and compensation of geometric deviations

Masaomi Tsutsumi, Ryuta Sato, Noriyuki Kato, 2013 .

Correction of Squareness of Translational Axes for Identification of Geometric Deviations Inherent to Five-Axis Machining Centres with a Tilting-Rotary Table

Masaomi Tsutsumi, Chengri Cui, Akinori Saito, 2013 .

A strategy for identifying static deviations in universal spindle head type multi-axis machining centers

K. M. Muditha Dassanayake, Masaomi Tsutsumi, Akinori Saito, 2006 .

Identification of angular and positional deviations inherent to 5-axis machining centers with a tilting-rotary table by simultaneous four-axis control movements

Masaomi Tsutsumi, Akinori Saito, M. Tsutsumi, 2004 .

Identification and compensation of systematic deviations particular to 5-axis machining centers

Masaomi Tsutsumi, Akinori Saito, M. Tsutsumi, 2003 .

Evaluation for Vibration Restriction of Punch Press by CAE.

Masaomi Tsutsumi, Masaki Adachi, Masataka Yoshimura, 1993 .

High-speed rotary cutting of difficult-to-cut materials on multitasking lathe

Masaomi Tsutsumi, Hiroshi Nakajima, Atsushi Kato, 2008 .

Control system design of a linear motor feed drive system using virtual friction

Masaomi Tsutsumi, Hirofumi Itagaki, M. Tsutsumi, 2014 .

Generation of a regularly aligned surface pattern and control of cutter marks array by patch division milling

Masaomi Tsutsumi, Hiroyuki Sasahara, Hiroshi Matsuda, 2008 .

Tool Path Generation for the Formation of a Geometric Surface Pattern on a Curved Surface by Patch Division Milling

Masaomi Tsutsumi, Hiroyuki Sasahara, Hiroshi Matsuda, 2007 .

Analysis of circular trajectory equivalent to cone-frustum milling in five-axis machining centers using motion simulator

Masaomi Tsutsumi, Ryuta Sato, Noriyuki Kato, 2013 .

High Performance Motion Control of Rotary Table for 5-Axis Machining Centers

Masaomi Tsutsumi, Ryuta Sato, R. Sato, 2007, Int. J. Autom. Technol..

Evaluation of Synchronous Motion in Five-axis Machining Centers With a Tilting Rotary Table

Masaomi Tsutsumi, Ryuta Sato, Daisuke Yumiza, 2007 .

Low-Frequency Vibration Drilling of Titanium Alloy

Masaomi Tsutsumi, Toshiaki Segawa, Hiroyuki Sasahara, 2006 .

Tooling Structure: Interface between Cutting Edge and Machine Tool

Christian Brecher, A. Galip Ulsoy, Toshimichi Moriwaki, 2000 .

Motion Characteristics of High Performance Rotary Tables for CNC Machines

K. M. Muditha Dassanayake, Masaomi Tsutsumi, Hisayoshi Ito, 2008 .

Simultaneous Five-axis Motion for Identifying Geometric Deviations Through Simulation in Machining Centers with a Double Pivot Head

Masaomi Tsutsumi, Ken Yamamoto, Muditha Dassanayake, 2008 .

Determination of Mathematical Models in Structural Analysis of Machine Tools : 2nd Report ; Determination of Mathematical Models for Normal Static Stiffness of Joints

Yoshimi Ito, Masaomi Tsutsumi, M. Tsutsumi, 1981 .

Multi-Axis Control using Model Matching Method of Feed Drive Systems for CNC Machine Tools.

T. Yamazaki, M. Tsutsumi, Tomohiro Kurihara, 1999 .

Compensation of Quadrant Glitches with Two Peaks in Circular Motions of Machining Centers

Masaomi Tsutsumi, Ryuta Sato, Takuro Higuchi, 2012 .

Study on Motion Accuracy Enhancement in NC Machine Tools

R. Sato, M. Tsutsumi, Takuro Higuchi, 2010 .

Friction Compensator for Feed Drive Systems Consisting of Ball Screw and Linear Ball Guide

R. Sato, M. Tsutsumi, R. Sato, 2007 .

Study on the compensation of error by stick-slip for high-precision table

Xuesong Mei, Masaomi Tsutsumi, Nuogang Sun, 2004 .