J. Spinelli

发表

Effects of solidification thermal parameters and Bi doping on silicon size, morphology and mechanical properties of Al-15wt.% Si-3.2wt.% Bi and Al-18wt.% Si-3.2wt.% Bi alloys

H. Henein, N. Cheung, Amauri Garcia, 2020 .

Interfacial heat transfer and microstructural analyses of a Bi- 5% Sb lead-free alloy solidified against Cu, Ni and low-C steel substrates

F. Bertelli, N. Cheung, Amauri Garcia, 2021 .

Experimental analysis of corrosion resistance on columnar to equiaxed transition region of as cast structures of Al–Cu alloys

Amauri Garcia, J. Spinelli, W. R. Osório, 2008 .

The effects of a eutectic modifier on microstructure and surface corrosion behavior of Al-Si hypoeutectic alloys

N. Cheung, Amauri Garcia, J. Spinelli, 2007 .

Relationship between Microstructure Evolution and Tensile Properties of AlSi10Mg Alloys with Varying Mg Content and Solidification Cooling Rates

Amauri Garcia, J. Spinelli, Marcella G. C. Xavier, 2021, Metals.

Relationship Between Microstructure Evolution and Tensile Properties of AlSi10mg Alloys With Varying Solidification Cooling Rates

Amauri Garcia, J. Spinelli, Marcella G. C. Xavier, 2021 .

Comparing the roles of Sb and Bi on microstructures and application properties of the Al-15% Si alloy

Amauri Garcia, J. Spinelli, L. F. Gomes, 2021 .

A method to determine the active particle nucleation undercooling distribution in a refined alloy

H. Nguyen-Thi, B. Billia, G. Reinhart, 2012 .

Interface evaluation of a Bi–Zn eutectic solder alloy: Effects of different substrate materials on thermal contact conductance

Rudimylla S. Septimio, N. Cheung, Amauri Garcia, 2021 .

Microstructure characterization and tensile properties of directionally solidified Sn-52 wt% Bi-1wt% Sb and Sn-52wt% Bi-2wt% Sb alloys

Amauri Garcia, J. Spinelli, R. Reyes, 2020 .

Correlations of microstructure and mechanical properties of the ternary Sn-9wt%Zn-2wt%Cu solder alloy

J. Spinelli, B. Silva, 2018 .

Effects of Solidification Thermal Parameters on Microstructure and Mechanical Properties of Sn-Bi Solder Alloys

Amauri Garcia, J. Spinelli, B. Silva, 2017, Journal of Electronic Materials.

Cellular/dendritic arrays and intermetallic phases affecting corrosion and mechanical resistances of an Al-Mg-Si alloy

Talita A. Vida, N. Cheung, Amauri Garcia, 2016 .

Interconnection of Zn content, macrosegregation, dendritic growth, nature of intermetallics and hardness in directionally solidified Mg-Zn alloys

N. Cheung, Amauri Garcia, Crystopher Brito, 2016 .

Dependence of Hardness on Microstructure of a Directionally Solidified Sn-40wt.%Bi-0.7wt.%Cu Alloy

J. Spinelli, B. Silva, 2015 .

Electrochemical behavior of a lead-free Sn–Cu solder alloy in NaCl solution

Amauri Garcia, J. Spinelli, W. R. Osório, 2014 .

Experimental and numerical analyses of laser remelted Sn–0.7 wt%Cu solder surfaces

F. Bertelli, N. Cheung, Amauri Garcia, 2015, Journal of Materials Science: Materials in Electronics.

The effects of microstructure and intermetallic phases of directionally solidified Al–Fe alloys on microhardness

Amauri Garcia, J. Spinelli, B. Silva, 2012 .

Thermal stress analysis of a directionally solidified Al-1wt%Ni alloy casting

José E. Spinelli, Amauri Garcia, J. Spinelli, 2010 .

Two-Zone Microstructures in Al-18Si Alloy Powders

H. Henein, J. Spinelli, A. Bogno, 2018, Metallurgical and Materials Transactions A.

Microstructure characterization of a directionally solidified Mg-12wt.%Zn alloy: Equiaxed dendrites, eutectic mixture and type/morphology of intermetallics

N. Cheung, Amauri Garcia, C. Afonso, 2018 .

The effect of residence time on the tensile properties of superelastic and thermal activated Ni-Ti orthodontic wires

A. E. Martinelli, J. Spinelli, R. Nascimento, 2011 .

Interplay of Wettability, Interfacial Reaction and Interfacial Thermal Conductance in Sn-0.7Cu Solder Alloy/Substrate Couples

N. Cheung, Amauri Garcia, J. Spinelli, 2019, Journal of Electronic Materials.

Sn-Bi(-Ga) TIM Alloys: Microstructure, Tensile Properties, Wettability and Interfacial Reactions

Amauri Garcia, J. Spinelli, R. Reyes, 2019, Journal of Electronic Materials.

The application of an analytical model to solve an inverse heat conduction problem: Transient solidification of a Sn-Sb peritectic solder alloy on distinct substrates

F. Bertelli, N. Cheung, Amauri Garcia, 2019 .

Assessing microstructure and mechanical behavior changes in a Sn-Sb solder alloy induced by cooling rate

Amauri Garcia, J. Spinelli, R. Reyes, 2019, Journal of Alloys and Compounds.

The Influence of Sintering Parameters in the Microstructure and Mechanical Properties of a Cu–Al–Ni–Mn–Zr Shape Memory Alloy

C. Kiminami, R. D. Cava, J. Spinelli, 2018, Advanced Engineering Materials.

Influence of annealing treatment on Si morphology and strength of rapid solidified Al-12 wt% Si powders

H. Henein, M. Gallerneault, J. Spinelli, 2019, Journal of Alloys and Compounds.

Microstructure morphologies during the transient solidification of hypomonotectic and monotectic Al–Pb alloys

Amauri Garcia, J. Spinelli, Adrina P. Silva, 2011 .

Processing, As-Cast Microstructure and Wear Characteristics of a Monotectic Al-Bi-Cu Alloy

Amauri Garcia, C. Afonso, J. Spinelli, 2019, Journal of Materials Engineering and Performance.

Microstructural development during transient directional solidification of hypermonotectic Al–Bi alloys

Amauri Garcia, J. Spinelli, N. Mangelinck-Noël, 2010 .

Microstructural evolution during upward and downward transient directional solidification of hypomonotectic and monotectic Al–Bi alloys

Amauri Garcia, J. Spinelli, Adrina P. Silva, 2009 .

Thermal parameters and microstructure during transient directional solidification of a monotectic Al–Bi alloy

Amauri Garcia, J. Spinelli, Adrina P. Silva, 2009 .

Characterization of Dendritic Microstructure, Intermetallic Phases, and Hardness of Directionally Solidified Al-Mg and Al-Mg-Si Alloys

Talita A. Vida, F. Bertelli, N. Cheung, 2015, Metallurgical and Materials Transactions A.

Investigation of intermetallics in hypoeutectic Al–Fe alloys by dissolution of the Al matrix

N. Cheung, Amauri Garcia, J. Spinelli, 2009 .

Evaluating Microstructure, Wear Resistance and Tensile Properties of Al-Bi(-Cu, -Zn) Alloys for Lightweight Sliding Bearings

Amauri Garcia, J. Spinelli, Rodrigo André Valenzuela Reyes, 2021, Metals.

Inter-relation of Microstructural Features and Dry Sliding Wear Behavior of Monotectic Al–Bi and Al–Pb Alloys

Amauri Garcia, J. Spinelli, E. Freitas, 2014, Tribology Letters.

Microstructure–wear behavior correlation on a directionally solidified Al–In monotectic alloy

Amauri Garcia, J. Spinelli, E. Freitas, 2013 .

On the growth of the minority phase during downward transient directional solidification of hypomonotectic and monotectic Al–Pb alloys

Amauri Garcia, J. Spinelli, P. Goulart, 2012, Journal of Materials Science.

Microstructural Morphologies and Experimental Growth Laws during Solidification of Monotectic and Hypermonotectic Al-Pb Alloys

Amauri Garcia, J. Spinelli, Adrina P. Silva, 2014 .

Effects of Melt Superheating on the Microstructure and Tensile Properties of a Ternary Al-15 Wt Pct Si-1.5 Wt Pct Mg Alloy

N. Cheung, Amauri Garcia, R. Kakitani, 2019, Metallurgical and Materials Transactions A.

Characterization of microstructure and wear resistance of a monotectic Al-Bi-Zn alloy

Amauri Garcia, J. Spinelli, R. Reyes, 2020 .

Near-eutectic Zn-Mg alloys: Interrelations of solidification thermal parameters, microstructure length scale and tensile/corrosion properties

Talita A. Vida, N. Cheung, Amauri Garcia, 2019, Current Applied Physics.

The effects of cell spacing and distribution of intermetallic fibers on the mechanical properties of hypoeutectic Al-Fe alloys

N. Cheung, Amauri Garcia, J. Spinelli, 2010 .

Combined growth of α-Al and Bi in a Al-Bi-Cu monotectic alloy analyzed by in situ X-ray radiography

H. Nguyen-Thi, G. Reinhart, J. Spinelli, 2020, Journal of Crystal Growth.

The roles of Al2Cu and of dendritic refinement on surface corrosion resistance of hypoeutectic Al–Cu alloys immersed in H2SO4

Amauri Garcia, J. Spinelli, W. R. Osório, 2007 .

The roles of macrosegregation and of dendritic array spacings on the electrochemical behavior of an Al–4.5 wt.% Cu alloy

Amauri Garcia, I. Ferreira, J. Spinelli, 2007 .

Characterization of Inconel and Stainless Steel Coatings Produced through Directed Energy Deposition Method Using Coarse Powders

R. Coelho, J. Spinelli, F. Mariani, 2022, Journal of Materials Engineering and Performance.

Growth direction and Si alloying affecting directionally solidified structures of Al–Cu–Si alloys

A. Moreira, I. Ferreira, O. Rocha, 2015 .

Relationship between spacing of eutectic colonies and tensile properties of transient directionally solidified Al-Ni eutectic alloy

N. Cheung, Amauri Garcia, R. Kakitani, 2018 .

Cellular growth during transient directional solidification of hypoeutectic Al–Fe alloys

José E. Spinelli, Noé Cheung, N. Cheung, 2009 .

Microstructure, phases morphologies and hardness of a Bi–Ag eutectic alloy for high temperature soldering applications

José E. Spinelli, Bismarck Luiz Silva, Amauri Garcia, 2014 .

Microstructure development and mechanical properties of rapidly solidified Ti–Fe and Ti–Fe–Bi alloys

C. Afonso, J. Spinelli, Guilherme Chittolina Pettan, 2015 .

Microstructure, corrosion behaviour and microhardness of a directionally solidified Sn–Cu solder alloy

José E. Spinelli, Wislei R. Osório, Leandro C. Peixoto, 2011 .

Effects of Ni and Co on the Corrosion Resistance of Al-Si-Cu-Zn-Fe Alloys in NaCl Solution

J. Spinelli, Marcella G. C. Xavier, G. Y. Koga, 2022, Metals.

Tailoring microstructure and tensile properties of Mg-Si alloys varying solidification cooling rate and Si content

Amauri Garcia, J. Spinelli, G. L. Gouveia, 2021 .

Microstructural development and mechanical properties of hypereutectic Sn–Cu solderalloys

Amauri Garcia, J. Spinelli, 2013 .

Effects of cell size and macrosegregation on the corrosion behavior of a dilute Pb-Sb alloy

Amauri Garcia, J. Spinelli, W. R. Osório, 2006 .

High cooling rate cells, dendrites, microstructural spacings and microhardness in a directionally solidified Al-Mg-Si alloy

H. Nguyen-Thi, G. Reinhart, N. Cheung, 2015 .

Directional solidification of a Sn-0.2Ni solder alloy in water-cooled copper and steel molds: Related effects on the matrix micromorphology, nature of intermetallics and tensile properties

N. Cheung, Amauri Garcia, R. Kakitani, 2017 .

Complex eutectic growth and Bi precipitation in ternary Sn-Bi-Cu and Sn-Bi-Ag alloys

José E. Spinelli, Bismarck Luiz Silva, Amauri Garcia, 2017 .

Cellular/Dendritic Transition and Microstructure Evolution during Transient Directional Solidification of Pb-Sb Alloys

Amauri Garcia, I. Ferreira, J. Spinelli, 2008 .

Influence of melt convection on dendritic spacings of downward unsteady-state directionally solidified Al-Cu alloys

Amauri Garcia, I. Ferreira, J. Spinelli, 2004 .

A comparison of experimental time-secondary dendritic spacing and coarsening models for Al-Si-Cu alloys

Amauri Garcia, J. Spinelli, Guilherme Lisboa de Gouveia, 2020 .

Solder/substrate interfacial thermal conductance and wetting angles of Bi–Ag solder alloys

José E. Spinelli, Felipe Bertelli, Bismarck Luiz Silva, 2016, Journal of Materials Science: Materials in Electronics.

Thermal conductance at Sn-0.5mass%Al solder alloy/substrate interface as a factor for tailoring cellular/dendritic growth

F. Bertelli, N. Cheung, Amauri Garcia, 2021, Journal of Thermal Analysis and Calorimetry.

The Role of Macrostructural and Microstructural Morphologies on the Corrosion Resistance of Zn and a Zn-4% Al Alloy

Amauri Garcia, J. Spinelli, W. R. Osório, 2007 .

Growth of tertiary dendritic arms during the transient directional solidification of hypoeutectic Pb–Sb alloys

Amauri Garcia, J. Spinelli, E. Freitas, 2011 .

The correlation between dendritic microstructure and mechanical properties of directionally solidified hypoeutectic Al-Ni alloys

José E. Spinelli, Noé Cheung, N. Cheung, 2010 .

SEM Characterization of Al3Ni Intermetallics and its Influence on Mechanical Properties of Directionally Solidified Hypoeutectic Al-Ni Alloys

N. Cheung, Amauri Garcia, J. Spinelli, 2010 .

Microstructural Development in Al-Ni Alloys Directionally Solidified under Unsteady-State Conditions

N. Cheung, Amauri Garcia, I. Ferreira, 2008 .

Tertiary dendrite arm spacing during downward transient solidification of Al-Cu and Al-Si alloys

Amauri Garcia, J. Spinelli, D. M. Rosa, 2006 .

Mechanical properties as a function of microstructure and solidification thermal variables of Al–Si castings

Amauri Garcia, J. Spinelli, W. R. Osório, 2006 .

Secondary dendrite arm spacing and solute redistribution effects on the corrosion resistance of Al–10 wt% Sn and Al–20 wt% Zn alloys

N. Cheung, Amauri Garcia, J. Spinelli, 2006 .

Thermosolutal convective effects on dendritic array spacings in downward transient directional solidification of Al–Si alloys

Amauri Garcia, J. Spinelli, M. Peres, 2005 .

Slow and rapid cooling of Al–Cu–Si ultrafine eutectic composites: Interplay of cooling rate and microstructure in mechanical properties

N. Cheung, C. Afonso, R. Kakitani, 2019, Journal of Materials Research.

An assessment of microstructure and properties of laser clad coatings of ultrafine eutectic β Ti-Fe-Nb-Sn composite for implants

R. Riva, C. Afonso, V. Amigó, 2017 .

Length Scale of the Cellular Microstructure Tailoring Tensile Properties of Zn–20 wt%Sn–2 wt%Cu Solder Alloy

J. Spinelli, R. Reyes, Cesar Bertolin dos Santos Mangualde, 2019, TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings.

Metal/mold thermal conductance affecting ultrafine scale microstructures in aluminum eutectic alloys

F. Bertelli, N. Cheung, Amauri Garcia, 2021 .

Microstructure, phase morphology, eutectic coupled zone and hardness of Al Co alloys

N. Cheung, Amauri Garcia, R. Kakitani, 2020 .

The role of eutectic colonies in the tensile properties of a Sn–Zn eutectic solder alloy

Amauri Garcia, J. Spinelli, R. Reyes, 2020 .

Laser remelting of AlSi10Mg(-Ni) alloy surfaces: influence of Ni content and cooling rate on the microstructure

P. Gargarella, Amauri Garcia, J. Spinelli, 2022, The International Journal of Advanced Manufacturing Technology.

Interconnection of thermal parameters, microstructure and mechanical properties in directionally solidified Sn–Sb lead-free solder alloys

José E. Spinelli, Marcelino Dias, Thiago A. Costa, 2015 .

Microstructural and mechanical properties analysis of extruded Sn–0.7Cu solder alloy

Hani Henein, José E. Spinelli, H. Henein, 2015 .

Microstructure Solidification Maps for Al-10 Wt Pct Si Alloys

H. Henein, J. Valloton, J. Spinelli, 2019, Metallurgical and Materials Transactions A.

Cooling thermal parameters, microstructural spacing and mechanical properties in a directionally solidified hypereutectic Al–Si alloy

N. Cheung, Amauri Garcia, R. Kakitani, 2016 .

Evaluation of Microstructures and Hardness of Al-10Si-0.45Mg-0.4Sc Alloy Powders

H. Henein, J. Spinelli, A. Bogno, 2021 .

The Roles of Ni and Co in Dendritic Growth and Tensile Properties of Fe‐Containing Al–Si–Cu–Zn Scraps under Slow and Fast Solidification Cooling

Amauri Garcia, J. Spinelli, Marcella G. C. Xavier, 2021, Advanced Engineering Materials.

A comparative analysis of microstructural features, tensile properties and wettability of hypoperitectic and peritectic Sn-Sb solder alloys

José E. Spinelli, Amauri Garcia, Bismarck Luiz Silva, 2018, Microelectron. Reliab..

Rapid Solidification of an Al-5Ni Alloy Processed by Spray Forming

C. Bolfarini, Amauri Garcia, C. Afonso, 2012 .

Quantification of microstructure to reveal the solidification path of an alloy

H. Henein, J. Valloton, J. Spinelli, 2019, IOP Conference Series: Materials Science and Engineering.

Microstructure and solidification thermal parameters in thin strip continuous casting of a stainless steel

J. A. Spim, Amauri Garcia, J. Spinelli, 2004 .

Steady and unsteady state peritectic solidification

N. Cheung, J. Spinelli, P. Goulart, 2015 .

Cellular growth during the transient directional solidification of Zn-rich Zn–Cu monophasic and peritectic alloys

Amauri Garcia, J. Spinelli, C. Brito, 2012 .

Effects of cell morphology and macrosegregation of directionally solidified Zn-rich Zn–Cu alloys on the resulting microhardness

Amauri Garcia, J. Spinelli, C. Brito, 2012 .

An alternative thermal approach to evaluate the wettability of solder alloys

José E. Spinelli, Felipe Bertelli, Bismarck Luiz Silva, 2016 .

Effects of cellular growth on fatigue life of directionally solidified hypoeutectic Al-Fe Alloys

J. Spinelli, B. Silva, W. S. Silva, 2014 .

Dendritic Growth, Solidification Thermal Parameters, and Mg Content Affecting the Tensile Properties of Al-Mg-1.5 Wt Pct Fe Alloys

Amauri Garcia, J. Spinelli, L. F. Gomes, 2017, Metallurgical and Materials Transactions A.

The influence of melt convection on dendritic spacing of downward unsteady-state directionally solidified Sn-Pb alloys

Amauri Garcia, O. Rocha, J. Spinelli, 2006 .

Influence of melt convection on the columnar to equiaxed transition and microstructure of downward unsteady-state directionally solidified Sn–Pb alloys

José E. Spinelli, Amauri Garcia, I. Ferreira, 2004 .

Influences of alloying elements and dendritic spacing on the corrosion behavior of Al-Si-Ag alloys

Amauri Garcia, J. Spinelli, L. F. Gomes, 2021, Journal of Materials Research and Technology.

Combined effects of Ag content and cooling rate on microstructure and mechanical behavior of Sn–Ag–Cu solders

Amauri Garcia, J. Spinelli, P. Pereira, 2013 .

Development of solidification microstructure and tensile mechanical properties of Sn-0.7Cu and Sn-0.7Cu-2.0Ag solders

Amauri Garcia, J. Spinelli, 2013, Journal of Materials Science: Materials in Electronics.

The effect of melt temperature profile on the transient metal/mold heat transfer coefficient during solidification

José E. Spinelli, Amauri Garcia, I. Ferreira, 2005 .

Transient Unidirectional Solidification, Microstructure and Intermetallics in Sn-Ni Alloys

N. Cheung, Amauri Garcia, R. Kakitani, 2018 .

Microstructural development during transient directional solidification of a hypomonotectic Al–In alloy

Amauri Garcia, J. Spinelli, P. Goulart, 2012 .

Microstructural development and mechanical properties of a near-eutectic directionally solidified Sn–Bi solder alloy

José E. Spinelli, Bismarck Luiz Silva, Guillaume Reinhart, 2015 .

Effect of Aging on Dendritic Array, Ag3Sn Spacing, and Hardness of a Sn-2Ag-0.7Cu Solder Alloy

Amauri Garcia, J. Spinelli, B. Silva, 2022, Journal of Electronic Materials.

Assessment of Tertiary Dendritic Growth and Its Effects on Mechanical Properties of Directionally Solidified Sn-0.7Cu-xAg Solder Alloys

José E. Spinelli, Bismarck Luiz Silva, Amauri Garcia, 2014, Journal of Electronic Materials.

Cellular to dendritic transition during transient solidification of a eutectic Sn-0.7 wt%Cu solder alloy

José E. Spinelli, Noé Cheung, N. Cheung, 2012 .

Sn-0.5Cu(-x)Al Solder Alloys: Microstructure-Related Aspects and Tensile Properties Responses

N. Cheung, Thiago S Lima, J. Spinelli, 2019, Metals.

Thermal Parameters, Microstructure, and Mechanical Properties of Directionally Solidified Sn-0.7 wt.%Cu Solder Alloys Containing 0 ppm to 1000 ppm Ni

José E. Spinelli, Bismarck Luiz Silva, Noé Cheung, 2012, Journal of Electronic Materials.

Cu and Ag additions affecting the solidification microstructure and tensile properties of Sn-Bi lead-free solder alloys

Amauri Garcia, J. Spinelli, Marcella G. C. Xavier, 2017 .

Cellular Microstructure and Mechanical Properties of a Directionally Solidified Al-1.0wt%Fe Alloy

F. Bertelli, N. Cheung, Amauri Garcia, 2010 .

Local solidification thermal parameters affecting the eutectic extent in Sn-Cu and Sn-Bi solder alloys

N. Cheung, Amauri Garcia, R. Kakitani, 2021, Soldering & Surface Mount Technology.

Effects of Silver Content and Cooling Rate on Electrical Conductivity and Tensile Properties of Al-Si(-Ag) Alloys

Amauri Garcia, J. Spinelli, L. F. Gomes, 2020, Journal of Materials Engineering and Performance.

An Alternative to the Recycling of Fe-Contaminated Al

N. Cheung, Amauri Garcia, Thiago S Lima, 2018, Journal of Sustainable Metallurgy.

A General Formulation of Eutectic Silicon Morphology and Processing History

H. Henein, J. Spinelli, A. Bogno, 2018 .

Dendritic Growth, Eutectic Features and Their Effects on Hardness of a Ternary Sn–Zn–Cu Solder Alloy

Amauri Garcia, J. Spinelli, B. Silva, 2017, Acta Metallurgica Sinica (English Letters).

Microstructural development of hypoeutectic Zn–(10–40)wt%Sn solder alloys and impacts of interphase spacing and macrosegregation pattern on hardness

F. Bertelli, Amauri Garcia, J. Spinelli, 2015 .

Evaluation of solder/substrate thermal conductance and wetting angle of Sn–0.7 wt%Cu–(0–0.1 wt%Ni) solder alloys

N. Cheung, Amauri Garcia, J. Spinelli, 2015 .

Tailoring Morphology and Size of Microstructure and Tensile Properties of Sn-5.5 wt.%Sb-1 wt.%(Cu,Ag) Solder Alloys

N. Cheung, Amauri Garcia, J. Spinelli, 2018, Journal of Electronic Materials.

Microstructure-property relations in as-atomized and as-extruded Sn-Cu (-Ag) solder alloys

H. Henein, J. Spinelli, B. Silva, 2016 .

Correlation between microstructure and hardness of a Bi-1.5wt%Ag lead-free solder alloy

J. Spinelli, B. Silva, R. Macedo, 2016 .

The roles of dendritic spacings and Ag3Sn intermetallics on hardness of the SAC307 solder alloy

José E. Spinelli, Amauri Garcia, Bismarck Luiz Silva, 2014, Microelectron. Reliab..

Interrelation of cell spacing, intermetallic compounds and hardness on a directionally solidified Al–1.0Fe–1.0Ni alloy

Amauri Garcia, J. Spinelli, C. Brito, 2013 .

Cellular-to-Dendritic and Dendritic-to-Cellular Morphological Transitions in a Ternary Al-Mg-Si Alloy

H. Nguyen-Thi, N. Cheung, J. Spinelli, 2019, IOP Conference Series: Materials Science and Engineering.

Assessing microstructures and mechanical resistances of as-atomized and as-extruded samples of Al-1wt%Fe-1wt%Ni alloy

J. Spinelli, L. F. Gomes, B. Silva, 2017 .

Thermal analysis during solidification of an Al–Cu eutectic alloy: interrelation of thermal parameters, microstructure and hardness

N. Cheung, Amauri Garcia, R. Kakitani, 2019, Journal of Thermal Analysis and Calorimetry.

Microstructural and mechanical properties analysis of extruded Sn – 0 . 7 Cu solder alloy

H. Henein, C. Afonso, J. Spinelli, 2015 .

The use of a directional solidification technique to investigate the interrelationship of thermal parameters, microstructure and microhardness of Bi-Ag solder alloys

José E. Spinelli, Bismarck Luiz Silva, Noé Cheung, 2014 .

Analysis of extensive wetting angle vs. cooling rate data in Bi-, Zn- and Sn-based solder alloys

N. Cheung, Amauri Garcia, J. Spinelli, 2022, Microelectronics Reliability.

Sn-0.7 wt%Cu-(xNi) alloys: Microstructure-mechanical properties correlations with solder/substrate interfacial heat transfer coefficient

José E. Spinelli, Bismarck Luiz Silva, Noé Cheung, 2015 .

Microstructure and Mechanical Properties of Directionally Solidified Unmodified and Ni-Modified Sn-0.7wt%Cu Lead-Free Solder Alloy

N. Cheung, Amauri Garcia, J. Spinelli, 2013 .

On array models theoretical predictions versus measurements for the growth of cells and dendrites in the transient solidification of binary alloys

José E. Spinelli, Noé Cheung, N. Cheung, 2011 .

Corrigendum to “Cellular growth during transient directional solidification of hypoeutectic Al–Fe alloys” [J. Alloys Compd. 470 (2009) 589–599]

N. Cheung, Amauri Garcia, I. Ferreira, 2009 .

Primary dendrite arm spacing during transient directional solidification of Al alloys with low redistribution coefficients

Amauri Garcia, J. Spinelli, M. Canté, 2009 .

Cellular growth during transient directional solidification of Pb-Sb alloys

Amauri Garcia, I. Ferreira, J. Spinelli, 2006 .

Understanding solidification and wear behaviour of Al-3Cu-Bi alloys

Amauri Garcia, J. Spinelli, L. F. Gomes, 2022, Materials Science and Technology.

Inverse segregation during transient directional solidification of an Al–Sn alloy: Numerical and experimental analysis

N. Cheung, Amauri Garcia, I. Ferreira, 2009 .

Gravity-driven inverse segregation during transient upward directional solidification of Sn–Pb hypoeutectic alloys

Amauri Garcia, I. Ferreira, J. Spinelli, 2009 .

Characterization, corrosion resistance and hardness of rapidly solidified Ni–Nb alloys

C. Afonso, V. Amigó, J. Spinelli, 2020 .

Influence of natural convection during upward directional solidification: A comparison between in situ X-ray radiography and direct simulation of the grain structure

J. Baruchel, H. Nguyen-Thi, B. Billia, 2013 .

Effects of Ag addition and dendritic scale on the corrosion behavior of the hypoeutectic Al-5wt% Si alloy

C. Rovere, J. Spinelli, L. F. Gomes, 2022, Journal of Applied Electrochemistry.

Multiple linear regression approach to predict tensile properties of Sn-Ag-Cu (SAC) alloys

N. Cheung, Amauri Garcia, J. Spinelli, 2021 .

Cooling thermal parameters and microstructure features of directionally solidified ternary Sn-Bi-(Cu,Ag) solder alloys

José E. Spinelli, Bismarck Luiz Silva, Amauri Garcia, 2016 .

The Effects of Microstructure and Ag3Sn and Cu6Sn5 Intermetallics on the Electrochemical Behavior of Sn-Ag and Sn-Cu Solder Alloys

Amauri Garcia, J. Spinelli, W. R. Osório, 2012, International Journal of Electrochemical Science.

Understanding the Effect of Ni Content on Microstructures and Tensile Properties of Alsi10mg Alloy Samples Under a Variety of Solidification Rates

J. Spinelli, L. F. Gomes, Guilherme Lisboa de Gouveia, 2022, SSRN Electronic Journal.

Tailoring microstructure, tensile properties and fracture process via transient directional solidification of Zn-Sn alloys

N. Cheung, Amauri Garcia, J. Spinelli, 2018 .

Microstructural and segregation effects affecting the corrosion behavior of a high‐temperature Bi‐Ag solder alloy in dilute chloride solution

Rudimylla S. Septimio, N. Cheung, Amauri Garcia, 2021, Journal of Applied Electrochemistry.

Dendritic Microstructure Affecting Mechanical Properties and Corrosion Resistance of an Al-9 wt% Si Alloy

J. Spinelli, W. R. Osório, P. Goulart, 2007 .

The columnar to equiaxed transition of horizontal unsteady-state directionally solidified Al-Si alloys

A. Moreira, O. Rocha, J. Spinelli, 2014 .

Microstructure and hardness of laser remelted surfaces of Al-5%Cu and Al-4%Cu-1%Ni alloys

R. Riva, J. Spinelli, B. Silva, 2023, Journal of Alloys and Compounds.

Mechanical Properties, Microstructural Features, and Correlations with Solidification Rates of Al–Cu–Si Ultrafine Eutectic Alloys

N. Cheung, Amauri Garcia, J. Spinelli, 2021, Advanced Engineering Materials.

Numerical and experimental analysis of rapidly solidified laser remelted Al 5wt pct Ni surfaces

N. Cheung, Amauri Garcia, J. Spinelli, 2010 .

Length Scale of the Dendritic Array Tailoring Strength of a 5052 Aluminum Alloy

Amauri Garcia, J. Spinelli, R. A. Reyes, 2018, Materials Research.

Transient Directional Solidification of Cast Iron: Microstructure Formation, Columnar to Equiaxed Transition and Hardness

J. Spinelli, Thiago Sartorello Spinola, 2016 .

Effects of cobalt and solidification cooling rate on intermetallic phases and tensile properties of a -Cu, -Zn, -Fe containing Al-Si alloy

T. M. Souza, N. Cheung, Amauri Garcia, 2020 .

Plate-like cell growth during directional solidification of a Zn–20wt%Sn high-temperature lead-free solder alloy

José E. Spinelli, José Maria do Vale Quaresma, Amauri Garcia, 2014 .

Tensile properties and related microstructural aspects of hypereutectic Al-Si alloys directionally solidified under different melt superheats and transient heat flow conditions

N. Cheung, Amauri Garcia, R. Kakitani, 2017 .

Evolution of eutectic spacing during unidirectional solidification of Al-Ni alloys

Amauri Garcia, J. Spinelli, B. Silva, 2011 .

Correlation between dendrite arm spacing and microhardness during unsteady-state directional solidification of Al–Ni alloys

Amauri Garcia, J. Spinelli, P. Goulart, 2011 .

Influences of solute content, melt superheat and growth direction on the transient metal/mold interfacial heat transfer coefficient during solidification of Sn–Pb alloys

B. Nestler, Amauri Garcia, I. Ferreira, 2008 .

Experimental analysis of the columnar-to-equiaxed transition in directionally solidified Al–Ni and Al–Sn alloys

José E. Spinelli, Noé Cheung, N. Cheung, 2007 .

Evaluation of heat transfer coefficients during upward and downward transient directional solidification of Al–Si alloys

Amauri Garcia, I. Ferreira, J. Spinelli, 2006 .

Effects of cobalt and solidification cooling rate on intermetallic phases and tensile properties of a -Cu, -Zn, -Fe containing Al-Si alloy

T. M. Souza, N. Cheung, Amauri Garcia, 2020, The International Journal of Advanced Manufacturing Technology.

Influence of Microstructure Length Scale on the Tensile Properties and Superplasticity of Cu-Doped Sn-34Bi TIM Alloy

V. Sordi, J. Spinelli, Marcella G. C. Xavier, 2019, Journal of Electronic Materials.

Wetting behavior of Sn–Ag–Cu and Sn–Bi–X alloys: insights into factors affecting cooling rate

Amauri Garcia, J. Spinelli, B. Silva, 2019, Journal of Materials Research and Technology.

Tailoring of Microstructures and Tensile Properties in the Solidification of Al-11Si(-xCu) Brazing Alloys

Amauri Garcia, J. Spinelli, L. F. Gomes, 2018, Metals.

High Cooling Rate, Regular and Plate Like Cells in Sn–Ni Solder Alloys

Amauri Garcia, J. Spinelli, Marcella G. C. Xavier, 2018 .

Al–Fe hypoeutectic alloys directionally solidified under steady-state and unsteady-state conditions

N. Cheung, Amauri Garcia, J. Spinelli, 2010 .

Towards a morphological control of Mg2Si and superior tensile properties of high-Zn Mg-0.6Si (-Zn) alloys

Amauri Garcia, J. Spinelli, G. Gouveia, 2021 .

Assessment of Electrochemical and Mechanical Behavior of Hot- Extruded Powders and As-Cast Samples of Al-Ni Alloys

Amauri Garcia, C. Afonso, J. Spinelli, 2012, International Journal of Electrochemical Science.

The influence of NbB inoculation on dendritic spacing and grain size of an aluminum 2017 alloy at different cooling rates

Amauri Garcia, J. Spinelli, Guilherme Lisboa de Gouveia, 2023, The International Journal of Advanced Manufacturing Technology.

Ag-containing aluminum-silicon alloys as an alternative for as-cast components of electric vehicles

Amauri Garcia, J. Spinelli, L. F. Gomes, 2021 .

Effects of Sc Addition and Direct Aging Treatment on Microstructure and Hardness of AlSi10Mg Alloy

J. Spinelli, G. Gouveia, A. Silva, 2023, Advanced Engineering Materials.

Microstructural Features of Sn-3.0Ag-0.7Cu Alloy Prepared by Conventional and Microwave Sintering

R. Kiminami, J. Spinelli, C. S. Kiminami, 2017 .

Design of mechanical properties of Al-alloys chill castings based on the metal/mold interfacial heat transfer coefficient

José E. Spinelli, Noé Cheung, José Maria do Vale Quaresma, 2012 .

MICROSTRUCTURE, THERMAL PARAMETERS AND MECHANICAL PROPERTIES OF TERNARY Al-7.0wt.%Mg-1.5wt.%Fe ALLOY

J. Spinelli, L. F. Gomes, B. Silva, 2016 .

Analysis of current dendritic growth models during downward transient directional solidification of Sn–Pb alloys

Amauri Garcia, J. Spinelli, 2005 .

Upward and downward unsteady-state directional solidification of a hypoeutectic Al-3wt.%Mg alloy

F. Bertelli, N. Cheung, Amauri Garcia, 2017 .

Modifications on solidification thermal parameters, microstructure and hardness induced by Cu additions to a hypereutectic Zn 8Al alloy

Rudimylla S. Septimio, N. Cheung, Amauri Garcia, 2021 .

Effects of Bi addition on Si features, tensile properties and wear resistance of hypereutectic Al-15Si alloy

J. Spinelli, L. F. Gomes, C. Pereira, 2020, IOP Conference Series: Materials Science and Engineering.

Evaluation of 6000 Al Alloys for Application in Chassis of Electric Vehicles

J. Spinelli, M. Dwek, G. Gouveia, 2022, Materials Research.

Microstructural modification by laser surface remelting and its effect on the corrosion resistance of an Al–9 wt%Si casting alloy

N. Cheung, Amauri Garcia, J. Spinelli, 2008 .