S. Cheng

发表

Free vibration of composite sandwich beam with graded corrugated lattice core

T. Zeng, Xiaohong Wang, Guo-dong Xu, 2019 .

Effect of Ca and Y additions on oxidation behavior of AZ91 alloy at elevated temperatures

Gencang Yang, S. Cheng, Jian-feng Fan, 2009 .

Surface oxidation behavior of Mg-Y-Ce alloys at high temperature

Y. H. Zhou, H. Xie, S. Cheng, 2005 .

Exact analytical solution for steady-state heat transfer in functionally graded sandwich slabs with convective-radiative boundary conditions

T. Zeng, Fan Yang, Xiaohong Wang, 2018 .

Theoretical study on the reaction mechanism of carbaryl with NO3 radical

S. Cheng, Hui Zhang, Shengmin Sun, 2017, Theoretical Chemistry Accounts.

Mechanism and kinetic study on the degradation of unsaturated esters initiated by OH radical

S. Cheng, Hui Zhang, Shengmin Sun, 2016, Theoretical Chemistry Accounts.

Microstructure and mechanical properties of an Al–Ni–Co intermetallics reinforced Al matrix composite

Changlin Yang, Jincheng Wang, Gencang Yang, 2009 .

The fabrication and mechanical properties of SiC/SiC composites prepared by SLS combined with PIP

T. Zeng, S. Cheng, Kun Zhang, 2018, Ceramics International.

Fabrication process and mechanical properties of C/SiC corrugated core sandwich panel

T. Zeng, Teng-fei Chen, S. Cheng, 2020 .

High‐temperature flexural strength of SiC ceramics prepared by additive manufacturing

T. Zeng, S. Cheng, Kun Zhang, 2020 .

Mechanical properties of SiCp/SiC composite lattice core sandwich panels fabricated by 3D printing combined with precursor impregnation and pyrolysis

T. Zeng, Guo-dong Xu, S. Cheng, 2020 .

Fabrication of Si3N4–SiC/SiO2 composites using 3D printing and infiltration processing

T. Zeng, Guo-dong Xu, S. Cheng, 2021, Ceramics International.

The hydrothermal treated Zn-incorporated titania based microarc oxidation coating: Surface characteristics, apatite-inducing ability and antibacterial ability

Yu Zhou, D. Jia, Yaming Wang, 2018, Surface and Coatings Technology.

MC3T3-E1 cells' response and osseointegration of bioactive sphene-titanium oxide composite coatings fabricated by a hybrid technique of microarc oxidation and heat treatment on titanium.

Yu Zhou, D. Jia, Yaming Wang, 2014, Journal of materials chemistry. B.

H2Ti5O11·H2O nanorod arrays formed on a Ti surface via a hybrid technique of microarc oxidation and chemical treatment

Yu Zhou, D. Jia, Yaming Wang, 2015 .

High temperature mechanical properties of lightweight C/SiC composite pyramidal lattice core sandwich panel

T. Zeng, Fan Yang, Kai Wei, 2017 .

Compressive and shear characteristics of an octahedral stitched sandwich composite

T. Zeng, Guo-dong Xu, S. Cheng, 2014 .

Rapidly formation of the highly bioactive surface with hydroxyapatite crystals on the titania micro arc oxidation coating by microwave hydrothermal treatment

Yu Zhou, D. Jia, Yaming Wang, 2019, Applied Surface Science.

Salt-fog corrosion behavior of C/SiC and its effect on ablation resistance

Yiguang Wang, S. Cheng, Guangyu Yang, 2019 .

Osseointegration of bioactive microarc oxidized amorphous phase/TiO2 nanocrystals composited coatings on titanium after implantation into rabbit tibia

Yu Zhou, D. Jia, Yaming Wang, 2014, Journal of Materials Science: Materials in Medicine.

The effect of applied voltages on the structure, apatite-inducing ability and antibacterial ability of micro arc oxidation coating formed on titanium surface

Yu Zhou, D. Jia, Yaming Wang, 2018, Bioactive materials.

Mechanical property of C/SiC corrugated lattice core composite sandwich panels after high temperature annealing

T. Zeng, Fan Yang, Xiaohong Wang, 2019, Composite Structures.

Laser ablation behavior and mechanism of C/SiC coated with ZrB2 –MoSi2–SiC/Mo prepared by HVOF

Yiguang Wang, S. Cheng, Xiaochong Liu, 2020, Ceramics International.

Mechanical properties and fracture mechanisms of aluminum matrix composites reinforced by Al9(Co, Ni)2 intermetallics

Jincheng Wang, Gencang Yang, S. Cheng, 2010 .

Bioactive coating with hierarchical double porous structure on titanium surface formed by two-step microarc oxidation treatment

Yu Zhou, D. Jia, Yaming Wang, 2014 .

Mechanical and corrosion resistance of hydrophilic sphene/titania composite coatings on titanium and deposition and release of cefazolin sodium/chitosan films

Yu Zhou, Daqing Wei, S. Cheng, 2011 .

The structure and in vitro apatite formation ability of porous titanium covered bioactive microarc oxidized TiO2-based coatings containing Si, Na and Ca

Yu Zhou, D. Jia, Yaming Wang, 2014 .

Structure of microarc oxidized coatings containing Si, Ca and Na on titanium and deposition of cefazolin sodium/chitosan composite film

Yu Zhou, Daqing Wei, S. Cheng, 2011 .

Compressive behavior of C/SiC composite sandwich structure with stitched lattice core

T. Zeng, D. Fang, Fan Yang, 2015 .

Laser ablative behavior of C/C modified by Si reactive infiltration

Hejun Li, Q. Fu, S. Cheng, 2020 .

Influence of Al-Ti-B addition on the microstructure and mechanical properties of A356 alloys

Gencang Yang, S. Cheng, Yaohe Zhou, 2009 .

Mechanical and oxidation properties of C/SiC corrugated lattice core composite sandwich panels

T. Zeng, D. Fang, Fan Yang, 2016 .

A multi-scale finite element method for failure analysis of three-dimensional braided composite structures

T. Zeng, D. Fang, J. Zhai, 2017 .

Finite Element Analysis of Thermo-Mechanical Properties of 3D Braided Composites

T. Zeng, Guo-dong Xu, S. Cheng, 2014, Applied Composite Materials.

Structure, MC3T3-E1 cell response, and osseointegration of macroporous titanium implants covered by a bioactive microarc oxidation coating with microporous structure.

Yu Zhou, D. Jia, Yaming Wang, 2014, ACS applied materials & interfaces.

Microarc oxidized TiO2 based ceramic coatings combined with cefazolin sodium/chitosan composited drug film on porous titanium for biomedical applications.

Yu Zhou, D. Jia, Yaming Wang, 2013, Materials science & engineering. C, Materials for biological applications.

Synergistic effects of surface chemistry and topologic structure from modified microarc oxidation coatings on Ti implants for improving osseointegration.

Yu Zhou, D. Jia, Yaming Wang, 2015, ACS applied materials & interfaces.

Interfacial reaction between Al72Ni12Co16 decagonal quasicrystalline particles and liquid aluminium

F. Liu, Feng Liu, Jincheng Wang, 2010 .

Microstructure and mechanical properties of Al-base composites by addition of Al–Ni–Co decagonal quasicrystalline particles through a mechanical stirring route

Gencang Yang, S. Cheng, Yaohe Zhou, 2010 .

3D printing of porous SiC ceramics added with SiO2 hollow microspheres

T. Zeng, Yikai Zhou, Guo-dong Xu, 2020 .

Microstructure characterization of Al matrix composite reinforced with Ti-6Al-4V meshes after compression by scanning electron microscope and transmission electron microscope.

S. Cheng, Q. Guo, G. Chen, 2012, Micron.

Mechanical response of carbon/epoxy composite sandwich structures with three-dimensional corrugated cores

Tao Zeng, Daining Fang, Su Cheng, 2018 .

Bending behavior of graded corrugated truss core composite sandwich beams

Fan Yang, Tao Zeng, Su Cheng, 2016 .

Response of composite sandwich beams with graded lattice core

Tao Zeng, Daining Fang, Su Cheng, 2015 .

Free vibration of two-directional functionally graded beams

T. Zeng, Xiaohong Wang, Guo-dong Xu, 2016 .

Conformal coating containing Ca, P, Si and Na with double-level porous surface structure on titanium formed by a three-step microarc oxidation

Yu Zhou, D. Jia, Yaming Wang, 2015 .

The effect of titanium bead diameter of porous titanium on the formation of micro-arc oxidized TiO2-based coatings containing Si and Ca

Yu Zhou, D. Jia, Yaming Wang, 2013 .

Thermo-mechanical behavior analysis of 3D braided composites by multiscale finite element method

Tao Zeng, Su Cheng, T. Zeng, 2017 .

Studies on the Bioceramic Coating on Titamium Substrate Including Silicon and Calcium by Micro-Arc Oxidation and Osteoblast’s Adhesion and Proliferation on the Coating

S. Cheng, Deyao Li, Leihai Han, 2013 .

Formation and structure of sphene/titania composite coatings on titanium formed by a hybrid technique of microarc oxidation and heat-treatment

Yu Zhou, Daqing Wei, S. Cheng, 2011 .

The effect of NaOH concentration on the steam-hydrothermally treated bioactive microarc oxidation coatings containing Ca, P, Si and Na on pure Ti surface.

Yu Zhou, D. Jia, Yaming Wang, 2015, Materials science & engineering. C, Materials for biological applications.

Characterization and properties of microarc oxidized coatings containing Si, Ca and Na on titanium

Yu Zhou, Daqing Wei, Haifeng Guo, 2011 .

TEM analysis and in vitro and in vivo biological performance of the hydroxyapatite crystals rapidly formed on the modified microarc oxidation coating using microwave hydrothermal technique

Yu Zhou, D. Jia, Yaming Wang, 2019, Chemical Engineering Journal.

Rapid structural evolution and bone inducing mechanism of the multilayer coating with silicon-doped hydroxyapatite crystals on the microwave water steaming-hydrothermally treated titania coating

Yu Zhou, D. Jia, Yaming Wang, 2021 .

Rapid Fabrication, Microstructure, and in Vitro and in Vivo Investigations of a High-Performance Multilayer Coating with External, Flexible, and Silicon-Doped Hydroxyapatite Nanorods on Titanium.

Yu Zhou, D. Jia, Yaming Wang, 2019, ACS biomaterials science & engineering.

MC3T3-E1 cell response of amorphous phase/TiO2 nanocrystal composite coating prepared by microarc oxidation on titanium.

Yu Zhou, D. Jia, Yaming Wang, 2014, Materials science & engineering. C, Materials for biological applications.

Preparation, cell response and apatite-forming ability of microarc oxidized coatings containing Si, Ca and Na on titanium

Yu Zhou, Daqing Wei, Haifeng Guo, 2011 .

The effect of oxidation time on the micro-arc titanium dioxide surface coating containing Si,Ca and Na

Su Cheng, Yu Zhou, Daqing Wei, 2012 .

Effect of heat treatment atmosphere on the structure and apatite-inducing ability of Ca, P, Si and Na incorporated microarc oxidation coating on titanium

Yu Zhou, D. Jia, Yaming Wang, 2017 .

Preparation of Carbon Fiber Reinforced SiC Matrix Composites by PIP Process

T. Zeng, S. Cheng, Quan Zhang, 2013 .

A coupled multi-scale method for predicting the viscoelastic behavior of resin-based 3D braided composites

Xiaohong Wang, J. Zhai, S. Cheng, 2020 .

Predicting the thermal conductivity and temperature distribution in 3D braided composites

T. Zeng, Guo-dong Xu, S. Cheng, 2014 .