Weiwei Yu

发表

Modelling of the temperature distribution based on equivalent heat transfer theory and anisotropic characteristics of honeycomb core during milling of aluminum honeycomb core

Ming Chen, Weiwei Ming, Q. An, 2021 .

Symmetrical Solutions for Edge-Loaded Annular Elastic Membranes

Weiwei Yu, Dale G. Karr, D. Karr, 2009 .

Corrosion effects on the ductile fracture, strength and reliability of membranes, plates and shells

Weiwei Yu, Weiwei Yu, 2009 .

Experimental study on the cutting responses and surface integrity of side milled in situ TiB2/Al composites

Ming Chen, Hao-wei Wang, Q. An, 2021, The International Journal of Advanced Manufacturing Technology.

Fatigue failure mechanism and life prediction of a cast duplex stainless steel after thermal aging

Xu Chen, Dunji Yu, Weiwei Yu, 2021 .

Experimental Study on Multiaxial Ratcheting Behavior of Vulcanized Natural Rubber

Xu Chen, Yanping Wang, Weiwei Yu, 2009 .

The effect of constraint on fracture properties of Z3CN20.09M after accelerated thermal aging

Xu Chen, F. Xue, Weiwei Yu, 2021 .

Effects of in-situ TiB2 particles on machinability and surface integrity in milling of TiB2/2024 and TiB2/7075 Al composites

Ming Chen, Hao-wei Wang, Q. An, 2020 .

Role of dynamic strain aging in the tensile property, cyclic deformation and fatigue behavior of Z2CND18.12N stainless steel between 293 K and 723 K

Xu Chen, Dunji Yu, Weiwei Yu, 2012 .

Investigation of heterogeneous ratcheting of a GTAW welded joint for primary coolant piping

Xu Chen, Jinhua Shi, Wenqing Jia, 2019, Materials Testing.

Experimental and FEM study of cutting mechanism and damage behavior of ceramic particles in orthogonal cutting SiCp/Al composites

Ming Chen, Weiwei Ming, Q. An, 2020 .

Temperature- and time-dependent behavior of Z2CN18.10 stainless steel under uniaxial loading

Jun Zhang, Xu Chen, Weiwei Yu, 2020, Mechanics of Time-Dependent Materials.

Thermal aging effect on Z3CN20.09M Cast Duplex Stainless Steel

F. Xue, Weiwei Yu, Hui-ji Shi, 2009 .

Comprehensive study on the cutting specific energy and surface roughness of milled in situ TiB2/Al composites and Al alloys

Ming Chen, Hao-wei Wang, Q. An, 2021, The International Journal of Advanced Manufacturing Technology.

Phase selection and mechanical properties of (Al21.7Cr15.8Fe28.6Ni33.9) (Al9.4Cr19.7Fe41.4Ni29.5) high entropy alloys

Weiwei Yu, Ruiming Su, Yaozu Guo, 2019, Materials Science and Engineering: A.

Effect of Phase Proportion on Wear Behavior of Al–Cr–Fe–Ni Dual-Phase High Entropy Alloys

Weiwei Yu, Rongde Li, Bo Yu, 2021, Metallography, Microstructure, and Analysis.

Effect of mean stress and ratcheting strain on the low cycle fatigue behavior of a wrought 316LN stainless steel

Weiwei Yu, Xu Chen, Dunji Yu, 2016 .

Effect of thermal aging on the low cycle fatigue behavior of Z3CN20.09M cast duplex stainless steel

Xu Chen, F. Xue, Dunji Yu, 2015 .

Cutting performance and wear mechanism of honeycomb ceramic tools in interrupted cutting of nickel-based superalloys

Ming Chen, Q. An, Weiwei Yu, 2021, Ceramics International.

Microstructure and Mechanical Properties of Thin-Multilayer Ti/Al Laminates Prepared by One-Step Explosive Bonding

Naksoo Kim, Xunzhong Guo, Kai Jin, 2016, Journal of Materials Engineering and Performance.

Experimental study on chip formation and surface quality in milling of TiB2/Al alloy composites

Ming Chen, Hao-wei Wang, Q. An, 2020 .

Tribological properties and tool wear in milling of in-situ TiB2/7075 Al composite under various cryogenic MQL conditions

Ming Chen, Hao-wei Wang, Q. An, 2021 .

Study on Micro-Structure and Tensile Mechanical Properties of Dissimilar Metal Weld Joint Connecting Steam Generator Nozzle and Safe-End

Jinhua Shi, Weiwei Yu, Xiaokun Liu, 2021, Crystals.

Effect of Cr content on corrosion behavior of AlCrxFeNi2Cu1.6 high entropy alloys

Weiwei Yu, Tongyu Liu, Chengze Li, 2019, Materials Research Express.

Visco-plastic constitutive modeling on Ohno–Wang kinematic hardening rule for uniaxial ratcheting behavior of Z2CND18.12N steel

Weiwei Yu, Xu Chen, Dunji Yu, 2012 .

Three-dimensional finite element analyses of repair process and safety margin assessment

Francis H. Ku, Weiqiang Wang, Jinhua Shi, 2019, International Journal of Pressure Vessels and Piping.

Uniaxial ratcheting deformation of 316LN stainless steel with dynamic strain aging: Experiments and simulation

Xu Chen, Ruisi Xing, Weiwei Yu, 2020 .

Thermo-viscoplastic modeling incorporating dynamic strain aging effect on the uniaxial behavior of Z2CND18.12N stainless steel

Xu Chen, Dunji Yu, Weiwei Yu, 2012 .

Effect of multiple heat treatments on fracture property of centrifugal casting stainless steels Z3CN20.09M with long-term thermal aging degradation

Yu-hao Cao, Wenqing Jia, F. Xue, 2020 .

Temperature-Dependent Bending Ratcheting Behavior of a 316LN Stainless Steel

Xu Chen, Dunji Yu, Weiwei Yu, 2015, Journal of Materials Engineering and Performance.

Ratcheting behavior of pressurized 90° elbow piping subjected to reversed in-plane bending with a combined hardening model

Xu Chen, Weiwei Yu, Duomin Li, 2016 .

TEMPERATURE AND TIME DEPENDENT BEHAVIOUR OF Z2CN18.10 STAINLESS STEEL UNDER UNIAXIAL LOADING

Xu Chen, Dunji Yu, Weiwei Yu, 2015 .

Thermal aging effect on the tensile and fatigue properties of the narrow-gap TIG welded joints in offshore floating nuclear power plants

Xu Chen, Wenqing Jia, F. Xue, 2019, International Journal of Fatigue.

Constitutive modeling for the anisotropic uniaxial ratcheting behavior of Zircaloy-4 alloy at room temperature

Xinfa Chen, Hua Li, Mingjian Wen, 2013 .

A modeling and prediction method for plunge cutting force considering the small displacement of cutting layer

Ming Chen, Q. An, Weiwei Yu, 2020 .

Leak-Before-Break assessment of a welded piping based on 3D finite element method

G. Qian, F. Xue, Weiwei Yu, 2017 .

Calcium-based sorbent doped with attapulgite for CO2 capture

Changsui Zhao, Huichao Chen, Weiwei Yu, 2013 .

Experimental evaluation of temper aging embrittlement of cast austenitic stainless steel from PWR

F. Xue, Weiwei Yu, Wen-xin Ti, 2011 .

Feasibility of supercritical CO2-based minimum quantity lubrication to improve the surface integrity of 50% Sip/Al composites

Ming Chen, Q. An, Weiwei Yu, 2022, Journal of Manufacturing Processes.

Effect of long-term aging on the fracture toughness of primary coolant piping material Z3CN20.09M

Xu Chen, F. Xue, Dunji Yu, 2018 .

Long-term thermal aging performance of welding structures in primary coolant pipes for nuclear power plants

Yu-hao Cao, Wenqing Jia, Yuanfei Li, 2020 .

A comparison between fracture toughness at different locations of SMAW and GTAW welded joints of primary coolant piping

Xu Chen, Jinhua Shi, F. Xue, 2018, Engineering Fracture Mechanics.

Uniaxial ratchetting behavior of vulcanized natural rubber

Xu Chen, Yanping Wang, Weiwei Yu, 2008 .

Wear behavior of SiAlON ceramic tool and its effects during high-speed cutting

Ming Chen, Q. An, Weiwei Yu, 2023, Ceramics International.

A Model to Predict Stall Inception of Transonic Axial Flow Fan/Compressors

Xiaofeng Sun, Dakun Sun, Weiwei Yu, 2011 .

Theory of Compressor Stability Enhancement Using Novel Casing Treatment, Part I: Methodology

Weiwei Yu, Xiaohua Liu, Dakun Sun, 2014 .