I. Gamwo

发表

Multiphase CFD-based models for chemical looping combustion process: Fuel reactor modeling

Jonghwun Jung, I. Gamwo, 2008 .

Experimental Investigation and Molecular-Based Modeling of Crude Oil Density at Pressures to 270 MPa and Temperatures to 524 K

Babatunde A. Bamgbade, I. Gamwo, Ward A. Burgess, 2018 .

High-Temperature, High-Pressure Equation of State: Solidification of Hydrocarbons and Measurement of Krytox Oil Using Rolling-Ball Viscometer Validation NETL Ultra-Deepwater and Frontier Regions Research Program Equation of State Team

Deepak Tapriyal, M. McHugh, B. Morreale, 2014 .

An Assessment of Research Needs Related to Improving Primary Cement Isolation of Formations in Deep Offshore Wells

Deepak Tapriyal, M. McHugh, B. Morreale, 2012 .

Nonisothermal Simulation of Flows in the Hot-Gas Filter Vessel at Wilsonville

J. Halow, G. Ahmadi, I. Gamwo, 2002 .

Ultrasonic measurement of solids concentration in an autoclave reactor at high temperature

Y. Soong, I. Gamwo, F. W. Harke, 1997 .

Measurement of solids concentration by an ultrasonic transmission technique

Y. Soong, I. Gamwo, F. W. Harke, 1997 .

Effect of Power Plant Capacity on the CAPEX, OPEX, and LCOC of the CO2 Capture Process in Pre-Combustion Applications

J. A. Steckel, W. Shi, B. Morsi, 2021, International Journal of Greenhouse Gas Control.

Levelized Cost of CO2 Captured Using Five Physical Solvents in Pre-combustion Applications

J. A. Steckel, W. Shi, B. Morsi, 2020 .

Full-Scale CFD Modeling of Multiphase Flow Distribution in a Packed-bed Absorber with Structured Packing Mellapak 250Y

Omar M. Basha, B. Morsi, N. Siefert, 2020 .

Mechanical specific energy versus depth of cut in rock cutting and drilling

Jeen-Shang Lin, I. Gamwo, Yaneng Zhou, 2017 .

A semi-empirical molecular statistical thermodynamic model for calculating standard molar Gibbs energies of aqueous species above and below the critical point of water

Derek M. Hall, S. Lvov, A. Bandura, 2018, Journal of Molecular Liquids.

Viscosity Models Based on the Free Volume and Entropy Scaling Theories for Pure Hydrocarbons over a Wide Range of Temperatures and Pressures

I. Gamwo, Hseen O. Baled, 2019, Thermophysical Properties of Complex Materials.

Temperature Distribution in a Demonstration-Scale Filter Vessel With and Without Ash Bridging

A. Mazaheri, G. Ahmadi, I. Gamwo, 2008 .

Exploratory Characterization of a Perfluoropolyether Oil as a Possible Viscosity Standard at Deepwater Production Conditions of 533 K and 241 MPa

Deepak Tapriyal, Babatunde A. Bamgbade, M. McHugh, 2013 .

Viscosity models for pure hydrocarbons at extreme conditions: A review and comparative study

M. McHugh, R. Enick, I. Gamwo, 2018 .

Viscosity of n-hexadecane, n-octadecane and n-eicosane at pressures up to 243MPa and temperatures up to 534K

Kun Liu, Deepak Tapriyal, Babatunde A. Bamgbade, 2014 .

HIGH TEMPERATURE, HIGH PRESSURE EQUATION OF STATE DENSITY CORRELATIONS AND VISCOSITY CORRELATIONS NETL-RUA Ultra-deepwater and Frontier Regions Research Program Equation of State Team

Deepak Tapriyal, M. McHugh, R. Enick, 2012 .

New Group-Contribution Parameters for the Calculation of PC-SAFT Parameters for Use at Pressures to 276 MPa and Temperatures to 533 K

Deepak Tapriyal, M. McHugh, R. Enick, 2014 .

High-Temperature, High-Pressure Volumetric Properties of Propane, Squalane, and Their Mixtures: Measurement and PC-SAFT Modeling

Deepak Tapriyal, Babatunde A. Bamgbade, M. McHugh, 2015 .

Viscosity Measurements of Two Potential Deepwater Viscosity Standard Reference Fluids at High Temperature and High Pressure

Deepak Tapriyal, Babatunde A. Bamgbade, M. McHugh, 2016 .

High-temperature, high-pressure viscosity of n-octane and isooctane

Deepak Tapriyal, Rajendar R. Mallepally, M. S. Newkirk, 2016 .

Viscosity Models Based on the Free Volume and Frictional Theories for Systems at Pressures to 276 MPa and Temperatures to 533 K

Mark A. McHugh, Robert M. Enick, Bryan D. Morreale, 2012 .

Measurements and modeling of high-temperature, high-pressure density for binary mixtures of propane with n -decane and propane with n -eicosane

Deepak Tapriyal, Babatunde A. Bamgbade, M. McHugh, 2015 .

Experimental and predictive PC-SAFT modeling results for density and isothermal compressibility for two crude oil samples at elevated temperatures and pressures

Babatunde A. Bamgbade, I. Gamwo, Ward A. Burgess, 2018 .

Thermodynamic Modeling of Mineral Scaling in High-Temperature and High-Pressure Aqueous Environments

Derek M. Hall, S. Lvov, I. Gamwo, 2022, Liquids.

Finite element modeling of rock cutting and its fragmentation process

Jeen-Shang Lin, Isaac K. Gamwo, Jeen-Shang Lin, 2015 .

COMPUTATIONAL AND EXPERIMENTAL MODELING OF THREE-PHASE SLURRY-BUBBLE COLUMN REACTOR

D. Gidaspow, I. Gamwo, 1999 .

Dry beneficiation of Slovakian coal

D. J. Fauth, M. Gray, Y. Soong, 2001 .

Multiphase Flow in Porous Media: Cake Formation During Extreme Drilling Processes

I. Gamwo, M. A. Kabir, 2018 .

Filter cake formation on the vertical well at high temperature and high pressure: Computational fluid dynamics modeling and simulations

I. Gamwo, A. Kabir, 2011 .

Mathematical Modeling and Numerical Simulation of Methane Production in a Hydrate Reservoir

Isaac K. Gamwo, I. Gamwo, Yong Liu, 2010 .

Measurement of Two Kinds of Granular Temperatures, Stresses, and Dispersion in Bubbling Beds

Dimitri Gidaspow, Isaac K. Gamwo, D. Gidaspow, 2005 .

CFD models for methanol synthesis three-phase reactors: reactor optimization

Dimitri Gidaspow, Isaac K. Gamwo, John S. Halow, 2003 .

THERMAL PROPERTIES OF METHANE HYDRATE BY EXPERIMENT AND MODELING AND IMPACTS UPON TECHNOLOGY

Niall J. English, K. Jordan, E. Rosenbaum, 2008 .

Comparison between equilibrium and kinetic models for methane hydrate dissociation

Isaac K. Gamwo, I. Gamwo, Yong Liu, 2012 .

High Temperature, High Pressure Equation of State: Solidification of Hydrocarbons and Measurement of Krytox Oil Using Rolling-Ball Viscometer Validation

Deepak Tapriyal, I. Gamwo, Ward A. Burgess, 2014 .

Validation of computed solids hydrodynamics and pressure oscillations in a bubbling atmospheric fluidized bed

Dimitri Gidaspow, B. T. Chao, Robert W. Lyczkowski, 1993 .

Impact of drilling fluid rheology and wellbore pressure on rock cuttings removal performance: numerical investigation

I. Gamwo, M. A. Kabir, 2015 .

Discrete Element Modeling of Rock Cutting Using Crushable Particles

I. Gamwo, J. A. Mendoza, J. S. Lin, 2010 .

Numerical simulation and experimental validation of solids flows in a bubbling fluidized bed

Robert W. Lyczkowski, Isaac K. Gamwo, Yee Soong, 1999 .

BUBBLE COMPUTATION, GRANULAR TEMPERATURES, AND REYNOLDS STRESSES

D. Gidaspow, Jonghwun Jung, I. Gamwo, 2006 .

Experimental and CFD Analyses of Bubble Parameters in a Variable-Thickness Fluidized Bed

Robert W. Lyczkowski, Isaac K. Gamwo, Jacques X. Bouillard, 2010 .

Modeling aqueous association constants and mineral solubilities at subcritical and supercritical temperatures

S. Lvov, I. Gamwo, Derek M. Hall, 2023, Journal of Molecular Liquids.

Hot-gas flow and particle transport and deposition in a candle filter vessel

Goodarz Ahmadi, Isaac K. Gamwo, A. Mazaheri, 2003 .

Computer Modeling of Flow, Thermal Condition and Ash Deposition in a Hot-Gas Filtration Device

Goodarz Ahmadi, Ali R. Mazaheri, C. Liu, 2002 .

Numerical Modeling of Rock Cutting

Isaac K. Gamwo, I. Gamwo, J.-S. Lin, 2011 .