M. Moldavsky

发表

In Vitro Biomechanical and Fluoroscopic Study of a Continuously Expandable Interbody Spacer Concerning Its Role in Insertion Force and Segmental Kinematics

Jonathan A. Harris, B. Bucklen, Joel A Torretti, 2018, Asian spine journal.

Evaluation of Spinous Process Tethering at the Proximal End of Rigid Constructs: In Vitro Range of Motion and Intradiscal Pressure at Instrumented and Adjacent Levels

V. Patel, B. Bucklen, M. Moldavsky, 2020, International Journal of Spine Surgery.

In Vitro Biomechanical Study to Quantify Range of Motion, Intradiscal Pressure, and Facet Force of 3-Level Dynamic Stabilization Constructs With Decreased Stiffness

Yongjung Kim, M. Moldavsky, S. Khalil, 2013, Spine.

Biomechanical Analysis of a Novel Pedicle Screw Anchor Designed for the Osteoporotic Population.

B. Bucklen, M. Moldavsky, G. Dunbar, 2015, World neurosurgery.

Biomechanics of the Injured SIJ: Results from an In Vitro Study

R. Mcnutt, B. Bucklen, M. Moldavsky, 2015 .

A comparative biomechanical study of traditional and in-line plating systems following immediate stabilization of single and bi-level cervical segments.

Mir M. Hussain, B. Bucklen, M. Moldavsky, 2012, Clinical biomechanics.

Spinal Instrumentation after Complete Resection of the Last Lumbar Vertebra: An In Vitro Biomechanical Study after L5 Spondylectomy

Mir M. Hussain, B. Bucklen, M. Moldavsky, 2011, Spine.

Effects of pre-contoured and in situ contoured rods on the mechanical strength and durability of posterior cervical instrumentation: a finite-element analysis and scanning electron microscopy investigation

Kee D. Kim, Ripul Panchal, B. Bucklen, 2020, Spine Deformity.

Biomechanical stability of a posterior-alone fixation technique after craniovertebral junction realignment.

M. Moldavsky, S. Khalil, R. Daniel, 2012, World neurosurgery.

Kinematic efficacy of supplemental anterior lumbar interbody fusion at lumbosacral levels in thoracolumbosacral deformity correction with and without pedicle subtraction osteotomy at L3: an in vitro cadaveric study

Jonathan A. Harris, B. Bucklen, M. Moldavsky, 2017, European Spine Journal.

Finding the right fit: studying the biomechanics of under-tapping with varying thread depths and pitches.

S. Ludwig, Comron Saifi, B. Bucklen, 2017, The spine journal : official journal of the North American Spine Society.

In vitro biomechanics of the craniocervical junction-a sequential sectioning of its stabilizing structures.

T. Albert, A. Vaccaro, Mir M. Hussain, 2015, The spine journal : official journal of the North American Spine Society.

The Biomechanical Effect of Transverse Connectors Use in a Pre- and Postlaminectomy Model of the Posterior Cervical Spine: An In Vitro Cadaveric Study

Mir M. Hussain, M. Moldavsky, S. Khalil, 2011, Spine.

Biomechanical Investigation of a Novel Revision Device in an Osteoporotic Model: Pullout Strength of Pedicle Screw Anchor Versus Larger Screw Diameter

F. La Marca, Mir M. Hussain, Jonathan A. Harris, 2015, Clinical spine surgery.

Short Segment Spinal Instrumentation With Index Vertebra Pedicle Screw Placement for Pathologies Involving the Anterior and Middle Vertebral Column Is as Effective as Long Segment Stabilization With Cage Reconstruction: A Biomechanical Study

Jonathan A. Harris, B. Bucklen, Yiwei Cai, 2015, Spine.

Indirect decompression and vertebral body endplate strength after lateral interbody spacer impaction: cadaveric and foam-block models.

B. Bucklen, M. Moldavsky, William D Hunter, 2016, Journal of neurosurgery. Spine.

A novel technique for sacropelvic fixation using image-guided sacroiliac screws: a case series and biomechanical study

Kee D. Kim, Mir M. Hussain, M. Moldavsky, 2018, Journal of biomedical research.

Biomechanical Comparison of Spinopelvic Reconstruction Techniques in the Setting of Total Sacrectomy

M. Moldavsky, S. Khalil, S. Chinthakunta, 2012, Spine.

The biomechanical stability of a novel spacer with integrated plate in contiguous two-level and three-level ACDF models: an in vitro cadaveric study.

Mark Moldavsky, Saif Khalil, M. Moldavsky, 2012, The spine journal : official journal of the North American Spine Society.

An initial biomechanical investigation of fusionless anterior tether constructs for controlled scoliosis correction.

William F Lavelle, N. Ordway, B. Bucklen, 2016, The spine journal : official journal of the North American Spine Society.

Biomechanical analysis of motion following sacroiliac joint fusion using lateral sacroiliac screws with or without lumbosacral instrumented fusion.

B. Bucklen, M. Moldavsky, S. Yandamuri, 2019, Clinical biomechanics.

Do facet screws provide the required stability in lumbar fixation? A biomechanical comparison of the Boucher technique and pedicular fixation in primary and circumferential fusions.

B. Bucklen, M. Moldavsky, S. Khalil, 2012, Clinical biomechanics.

In vitro biomechanical study of pedicle screw pull-out strength based on different screw path preparation techniques

B. Bucklen, M. Moldavsky, S. Khalil, 2016, Indian journal of orthopaedics.

Do facet screws provide the required stability in lumbar fi xation ?

B. Bucklen, M. Moldavsky, S. Khalil, 2011 .

Range of motion after thoracolumbar corpectomy: evaluation of analogous constructs with a novel low-profile anterior dual-rod system and a traditional dual-rod system

B. Bucklen, M. Moldavsky, S. Khalil, 2017, European Spine Journal.

Stabilization of the craniocervical junction after an internal dislocation injury: an in vitro study.

T. Albert, A. Vaccaro, Mir M. Hussain, 2015, The spine journal : official journal of the North American Spine Society.

Could Junctional Problems at the End of a Long Construct be Addressed by Providing a Graduated Reduction in Stiffness?: A Biomechanical Investigation

B. Bucklen, M. Moldavsky, S. Khalil, 2012, Spine.

A biomechanical evaluation of a spacer with integrated plate for treating adjacent-level disease in the subaxial cervical spine.

M. Moldavsky, S. Khalil, M. Gudipally, 2012, The spine journal : official journal of the North American Spine Society.

An In Vitro Biomechanical Study Evaluating Cervical Extension Plates for Stabilizing Degenerated Adjacent Levels

M. Moldavsky, S. Khalil, K. Majid, 2014, Clinical spine surgery.

Anterior Fixation of Floating Facet Fractures in the Cervical Spine: A Prospective Case Series and Biomechanical Analysis

Vasilios A. Zerris, M. Moldavsky, S. Khalil, 2018, International Journal of Spine Surgery.