S. Chinthakunta

发表

In Vitro Biomechanical Study to Quantify Range of Motion, Intradiscal Pressure, and Facet Force of 3-Level Dynamic Stabilization Constructs With Decreased Stiffness

Yongjung Kim, M. Moldavsky, S. Khalil, 2013, Spine.

Axial pullout strength comparison of different screw designs: fenestrated screw, dual outer diameter screw and standard pedicle screw

P. Drees, E. Christodoulou, S. Khalil, 2015, Scoliosis.

Kinematics of a selectively constrained radiolucent anterior lumbar disc: comparisons to hybrid and circumferential fusion.

Mir M. Hussain, S. Khalil, S. Chinthakunta, 2012, Clinical biomechanics.

Confronting Our Absolute Stupidity . Several Suggested Readings

N. Kulkarni, V. Goel, Tejaswy Potluri, 2009 .

Development of a Skull-T2 Finite Element Model for the Investigation of Subluxation-Based Upper Cervical Chiropractic Manipulation

N. Kulkarni, V. Goel, Tejaswy Potluri, 2009 .

Pedicle Screw Configuration for Thoracolumbar Burst Fracture Treatment: Short versus Long Posterior Fixation Constructs with and without Anterior Column Augmentation

Mir M. Hussain, S. Khalil, S. Chinthakunta, 2014, Asian spine journal.

Additional sagittal correction can be obtained when using an expandable titanium interbody device in lumbar Smith-Peterson osteotomies: a biomechanical study.

Mir M. Hussain, B. Bucklen, N. Klocke, 2015, The spine journal : official journal of the North American Spine Society.

Pedicle screw instrumentation of thoracolumbar burst fractures: Biomechanical evaluation of screw configuration with pedicle screws at the level of the fracture

S. Khalil, S. Chinthakunta, M. Bolesta, 2012, International Journal of Spine Surgery.

Cyclic loads do not compromise functionality of the interspinous spacer or cause damage to the spinal segment: an in vitro analysis.

V. Goel, L. Ferrara, A. Mehta, 2008, Journal of long-term effects of medical implants.

A comparative biomechanical study of a novel integrated plate spacer for stabilization of cervical spine: an in vitro human cadaveric model.

S. Khalil, S. Chinthakunta, K. Majid, 2012, Clinical biomechanics.

Biomechanical Comparison of Spinopelvic Reconstruction Techniques in the Setting of Total Sacrectomy

M. Moldavsky, S. Khalil, S. Chinthakunta, 2012, Spine.

Comparison of Fatigue Strength of C2 Pedicle Screws, C2 Pars Screws, and a Hybrid Construct in C1–C2 Fixation

C. Ames, A. Vaccaro, Adam L. Shimer, 2014, Spine.

An In Vitro Evaluation of Fracture Reduction Achieved by Inflatable Bone Tamps Under Simulated Physiological Load

B. Bucklen, S. Chinthakunta, D. O'Halloran, 2013, Clinical spine surgery.

Anterior Fixation of Floating Facet Fractures in the Cervical Spine: A Prospective Case Series and Biomechanical Analysis

Vasilios A. Zerris, M. Moldavsky, S. Khalil, 2018, International Journal of Spine Surgery.

Spine: A Prospective Case Series and Biomechanical Analysis Anterior Fixation of Floating Facet Fractures in the Cervical MOLDAVSKY, SURESH CHINTHAKUNTA and SAIF

Vasilios A. Zerris, S. Khalil, M. Rahm, 2018 .