Jiuchun Yan

发表

Interfacial reaction of intermetallic compounds of ultrasonic-assisted brazed joints between dissimilar alloys of Ti6Al4V and Al4Cu1Mg.

Zhipeng Ma, Weiwei Zhao, Jiuchun Yan, 2011, Ultrasonics sonochemistry.

Microstructural evolution of SiC joints soldered using Zn-Al filler metals with the assistance of ultrasound.

X. Leng, Jiuchun Yan, B. Wu, 2018, Ultrasonics sonochemistry.

Effect of ultrasonic vibration on the grain refinement and SiC particle distribution in Zn-based composite filler metal

Jiuchun Yan, Zhiwu Xu, Wei Chen, 2008 .

Pressureless bonding process using Ag nanoparticle paste for flexible electronics packaging

A. Wu, G. Zou, Jia-lie Ren, 2012 .

Polymer nanostructured components machined directly by the atomic force microscopy scratching method

Yongda Yan, Zhenjiang Hu, Wei Gao, 2012 .

Ultrasonic assisted fabrication of particle reinforced bonds joining aluminum metal matrix composites

Xing Ma, Lei Shi, Jiuchun Yan, 2011 .

Effect of Sample Materials on the AFM Tip-Based Dynamic Ploughing Process

Yongda Yan, Wei Liu, Jiuchun Yan, 2011 .

Microstructure characteristics and performance of dissimilar welds between magnesium alloy and aluminum formed by friction stirring

Jiuchun Yan, Zhiwu Xu, Shiqin Yang, 2005 .

Ultrasonic-assisted soldering of fine-grained 7034 aluminum alloy using Sn-Zn solders below 300°C.

Jiuchun Yan, Weibing Guo, Tianmin Luan, 2018, Ultrasonics sonochemistry.

Formation of TiAl3 and its reinforcing effect in TA15 alloy joint ultrasonically brazed with pure Al

Zhengwei Li, Jiuchun Yan, Zhiwu Xu, 2020 .

Interfacial structure and mechanical properties of hot-roll bonded joints between titanium alloy and stainless steel using niobium interlayer

Jiuchun Yan, Yu-jun Liu, Zhuo-shang Ji, 2014 .

Single-directional dynamic equilibrium between precipitation and dissolution in solid-aluminum/melted-tin system

X. Leng, Wei Yang, Weiwei Zhao, 2019, Materials Letters.

Ultrasonic cavitation at liquid/solid interface in a thin Ga–In liquid layer with free surface

Zhengwei Li, Jiuchun Yan, Zhiwu Xu, 2020, Ultrasonics sonochemistry.

Cavitation at filler metal/substrate interface during ultrasonic-assisted soldering. Part II: Cavitation erosion effect.

Xue-song Liu, Zhengwei Li, Jiuchun Yan, 2019, Ultrasonics sonochemistry.

Interaction behaviors at the interface between liquid Al-Si and solid Ti-6Al-4V in ultrasonic-assisted brazing in air.

F. Gao, G. Fan, Jiuchun Yan, 2013, Ultrasonics sonochemistry.

Building a nano-crystalline α-alumina layer at a liquid metal/sapphire interface by ultrasound.

Yan Dai, W. Cui, Jiuchun Yan, 2015, Ultrasonics sonochemistry.

Dependence of the microstructure and properties of joints on acoustic intensity during the ultrasonic soldering of 7075 Al alloys

Xue-song Liu, Zhengwei Li, Jiuchun Yan, 2021 .

Grain refinement caused by intensified cavitation within narrow channel and its improvement to ultrasonically soldered Al joint property.

Xue-song Liu, Zhengwei Li, Jiuchun Yan, 2019, Ultrasonics sonochemistry.

Wetting mechanism of Sn to Zr50.7Cu28Ni9Al12.3 bulk metallic glass assisted by ultrasonic treatment.

Zhipeng Ma, Zhengwei Li, Jiuchun Yan, 2018, Ultrasonics sonochemistry.

Substrate oxide undermining by a Zn–Al alloy during wetting of alumina reinforced 6061 Al matrix composite

Cheng Wang, Jiuchun Yan, Zhiwu Xu, 2008 .

Interfacial Structure and Formation Mechanism of Ultrasonic-assisted Brazed Joint of SiC Ceramics with Al-12Si Filler Metals in Air

G. Zou, Lei Liu, Z. Lai, 2017 .

Mechanical performance and corrosion behavior of TiAlSiN/WS2 multilayer deposited by multi-plasma immersion ion implantation and deposition and magnetron sputtering

Xiaofeng Wang, Z. Xie, Li Yang, 2011 .

Cavitation at filler metal/substrate interface during ultrasonic-assisted soldering. Part I: Cavitation characteristics.

Xue-song Liu, Zhengwei Li, Jiuchun Yan, 2018, Ultrasonics sonochemistry.

Cinematographic observation of the deformation of an antibubble when a spark-induced cavitation bubble oscillates in its vicinity

Jiuchun Yan, Lixin Bai, Zhijie Zeng, 2020 .

Effect of PVP on the low temperature bonding process using polyol prepared Ag nanoparticle paste for electronic packaging application

A. Wu, G. Zou, Jia-lie Ren, 2012 .

Ultrasonic-assisted liquid phase diffusion bonding of Al alloys under low temperature and pressure for high-temperature resistance applications

X. Leng, Zhengwei Li, Pu Zhao, 2022, Materials & Design.

Combined influence of substrate relief and mechanical compression on topographical evolution of surface wrinkling

Liqin Wang, Jiuchun Yan, Xiaoli Zhao, 2013, 2013 International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale.

Microstructure, mechanical properties and mechanism of ultrasound-assisted rapid transient liquid phase bonding of magnesium alloy in air

G. Zou, Z. Lai, Jiuchun Yan, 2016 .

The microstructure and mechanical properties of fluxless gas tungsten arc welding–brazing joints made between titanium and aluminum alloys

Zhipeng Ma, Jiuchun Yan, Hanchen Yu, 2013 .

Soldering porous ceramics through ultrasonic-induced capillary action and cavitation

Zhengwei Li, Jiuchun Yan, Yushi Qi, 2019, Ceramics International.

Microstructure and enhanced joint performance of porous Si3N4 ceramics in ultrasonic soldering

Zhengwei Li, Jiuchun Yan, Zhiwu Xu, 2022, Materials Science and Engineering: A.

Solidification microstructure of SiC particulate reinforced Zn–Al composites under ultrasonic exposure

Jiuchun Yan, Zhiwu Xu, Wei Chen, 2014 .

High speed imaging and numerical simulations of cavitation characteristic during the spreading of GaIn melt under ultrasonication

Zhengwei Li, Jiuchun Yan, Zhiwu Xu, 2022, International Journal of Mechanical Sciences.

Thermal expansion behavior and performance of VLP diffusion-bonded joints of SiCp/A356 composites

Weiwei Zhao, Jiuchun Yan, Zhiwu Xu, 2005 .

Reduction of intermetallic compounds in ultrasonic-assisted semi-solid brazing of Al/Mg alloys

Zhengwei Li, Lei Xu, Jiuchun Yan, 2018, Science and Technology of Welding and Joining.

Al 1060/Pure Iron Clad Materials by Vacuum Roll Bonding and Their Solderability

X. Leng, Jiuchun Yan, Weibing Guo, 2013 .

Interface structure and strength of ultrasonic vibration liquid phase bonded joints of Al2O3p/6061Al composites

Jiuchun Yan, Zhiwu Xu, Shiqin Yang, 2005 .

Joint formation and mechanical properties of ultrasonic-assisted transient liquid bonding of dissimilar Al/Mg with a Zn interlayer in air

Zhengwei Li, Jiuchun Yan, Zhiwu Xu, 2022, Journal of Manufacturing Processes.

Evolution of IMC layer and its reinforcing effect in 2024/MB8 dissimilar joints using a multi-interlayer of Cu/Zn via U-TLP bonding

Zilong Peng, N. Cui, Jiuchun Yan, 2022, Materials Science and Engineering: A.

Microstructure evolution of Mg/Cu dissimilar metal jointed by ultrasonic-induced transient liquid phase bonding with Zn interlayer

Wenjing Zhang, Jiuchun Yan, Jian-Chao Han, 2019, Materials Characterization.

Ultra-rapid transient liquid phase bonding of Mg alloys within 1 s in air by ultrasonic assistance

Zhengwei Li, Jiuchun Yan, Zhiwu Xu, 2019, Materials & Design.

Ultrarapid formation of multi-phase reinforced joints of hypereutectic Al-Si alloys via an ultrasound-induced liquid phase method using Sn-51In interlayer

Jiuchun Yan, Tianhao Yang, Lin Zhu, 2018 .

Grain morphology and mechanical strength of high-melting-temperature intermetallic joints formed in asymmetrical Ni/Sn/Cu system using transient liquid phase soldering process

Xiaoguo Song, Hua Zhao, Jiuchun Yan, 2017 .

Grain morphology evolution and mechanical strength change of intermetallic joints formed in Ni/Sn/Cu system with variety of transient liquid phase soldering temperatures

Xiaoguo Song, Jiuchun Yan, Z. L. Li, 2017 .

Ultrasonic-promoted rapid TLP bonding of fine-grained 7034 high strength aluminum alloys.

X. Leng, Jiuchun Yan, Weibing Guo, 2017, Ultrasonics sonochemistry.

Rapid ultrasound-induced transient-liquid-phase bonding of Al-50Si alloys with Zn interlayer in air for electrical packaging application.

Z. Lai, Jiuchun Yan, Lin Zhu, 2017, Ultrasonics sonochemistry.

Microstructure evolution and mechanical properties of ultrasonically TLP bonded Mg joint

Zhengwei Li, Jiuchun Yan, Zhiwu Xu, 2020 .

Effects of TiZn3 and TiZn16 components on the microstructure and mechanical performance of Ti-6Al-4 V alloy joints formed via ultrasonic assisted brazing using pre-galvanized workpieces.

N. Cui, Jiuchun Yan, Yinan Li, 2022, Ultrasonics.

Relative slipping of interface of titanium alloy to stainless steel during vacuum hot roll bonding

Yulei Wang, Jiuchun Yan, Shiqin Yang, 2009 .

Deformation behavior of semi-solid Zn–Al alloy filler metal during compression

Lei Shi, Jiuchun Yan, Ya-jie Han, 2011 .

Behaviors of Oxide Layer at Interface between Semi-solid Filler Metal and Aluminum Matrix Composites during Vibration

Lei Shi, Jiuchun Yan, Ya-jie Han, 2011 .

Interface structure changes during vibration liquid phase bonding of SiCp/A356 composites in air

Jiuchun Yan, Zhiwu Xu, Shiqin Yang, 2006 .

Cavitation in thin liquid layer: A review.

Jiuchun Yan, Zhijie Zeng, Yuhang Ma, 2020, Ultrasonics sonochemistry.

Effects of Fe—Al intermetallic compounds on interfacial bonding of clad materials

X. Leng, Jiuchun Yan, Tianhao Yang, 2014 .

Microstructure and strength of ultrasonic-assisted brazed joints of Si3N4/6061Al composites

X. Leng, Jiuchun Yan, Z. Xiu, 2020, Journal of Manufacturing Processes.

Behaviors of Oxide Film during Semisolid Brazing of SiCp/6063Al Composite Materials

Jiuchun Yan, Jing Xiao, S. Bai, 2018, Advances in Materials Science and Engineering.

Interface structure and mechanical performance of TLP bonded joints of Al2O3p/6061Al composites using Cu/Ni composite interlayers

Jiuchun Yan, Zhiwu Xu, Shiqin Yang, 2004 .

Microstructure design and dissolution behavior between 2024 Al/Sn with the ultrasonic-associated soldering

X. Leng, Sheng Cheng, Jiuchun Yan, 2012 .

Microstructure and mechanical properties of magnesium alloys joints with Ag-Cu interlayer by ultrasonic-induced transient liquid phase bonding in air for structure lightweight design

Yang Fu, Jiuchun Yan, Shengyong Chen, 2019, Materials Letters.

Si particulate-reinforced ZnAl based composites joints of hypereutectic Al50Si alloys by ultrasonic-assisted soldering

W. Zhihua, Jiuchun Yan, Lin Zhu, 2016 .

Fluxless soldering of 7034 aluminium in air using protective liquid Ga coatings

X. Leng, Jiuchun Yan, Tianmin Luan, 2022, Materials Science and Technology.

Compression Brazing of SiCp/Al Composite Using a Semisolid Zn-Al-Cu Filler Metal Based on the Strain-Induced Melt Activation Process

Jiuchun Yan, Jing Xiao, S. Bai, 2019, JOM.

Ultrasonic-assisted soldering of fine-grained 7034 aluminum alloys using ZnAl filler metals

Jiuchun Yan, Weibing Guo, Tianmin Luan, 2017 .

Formation of amorphous interfacial layer between Zn-based alloy and SiC particles under ultrasonic-assisted brazing

Haiyang Yu, Zhipeng Ma, W. Cui, 2018, International Journal of Materials Research.

Ultrasonic-assisted brazing of SiC ceramic to Ti–6Al–4V alloy using a novel AlSnSiZnMg filler metal

Jiuchun Yan, Jinghui Wei, Sichao Ren, 2013 .

Behaviors of oxide film at the ultrasonic aided interaction interface of Zn–Al alloy and Al2O3p/6061Al composites in air

Jiuchun Yan, Zhiwu Xu, Shiqin Yang, 2006 .

Microstructure, mechanical properties, and bonding mechanism of ultrasonic-assisted brazed joints of SiC ceramics with ZnAlMg filler metals in air

Jiuchun Yan, G. Fan, Jinghui Wei, 2014 .

Ultrasonic-assisted brazing of Al–Ti dissimilar alloy by a filler metal with a large semi-solid temperature range

G. Zou, Z. Lai, Jiuchun Yan, 2016 .

Microstructure and mechanical properties of Ti–6Al–4V/Al1060 joints by ultrasonic-assisted brazing in air

Jiuchun Yan, Jinghui Wei, Sichao Ren, 2013 .

Fast low-temperature ultrasonically soldering porous Si3N4 ceramics in the air

Zhengwei Li, Jiuchun Yan, Zhiwu Xu, 2021, Ceramics International.

Strengthening mechanism of ceramic particle reinforced bonds by ultrasonic brazing of AlMMCs

X. Leng, Jiuchun Yan, Chang-wen Wang, 2011 .

Ultrasonic-assisted soldering of sapphire through metallic transition layers of Al and Zn using Sn-xZn-2Al solder alloys

Jiuchun Yan, Z. Xiu, Xinran Ma, 2022, Ceramics International.

Ultrasonic-assisted brazing of sapphire with high strength Al–4.5Cu–1.5Mg alloy

W. Cui, Shuqi Li, Jiuchun Yan, 2015 .

Wetting and oxidation during ultrasonic soldering of an alumina reinforced aluminum–copper–magnesium (2024 Al) matrix composite

S. Du, Jiuchun Yan, Zhiwu Xu, 2012 .

Ultrasonic dissolution of brazing of 55% SiCp/A356 composites

Yan Cui, Jiuchun Yan, Xiao-guang Chen, 2010 .

Effects of Zn on intermetallic compounds and strength of Al/Mg joints ultrasonically soldered in air

Xue-song Liu, Zhengwei Li, Jiuchun Yan, 2019, Journal of Materials Processing Technology.

Control Al/Mg intermetallic compound formation during ultrasonic-assisted soldering Mg to Al.

Zhipeng Ma, Zhengwei Li, Jiuchun Yan, 2018, Ultrasonics sonochemistry.

Influence of Si content on structure and mechanical properties of TiAlSiN coatings deposited by multi-plasma immersion ion implantation and deposition

J. Yan, Xiaofeng Wang, Z. Xie, 2011 .

Longitudinal Ultrasonic Vibration Assisted Rapid Solid Phase Bonding of 2024 Aluminum Alloy Using Ag as Interlayer for Structure Lightweight Design

Y. Nie, Y. Shao, Jiuchun Yan, 2020, Metals and Materials International.

Interface structure of ultrasonic vibration aided interaction between Zn–Al alloy and Al2O3p/6061Al composite

Jiuchun Yan, Zhiwu Xu, Shiqin Yang, 2005 .

Direct soldering of screen-printed Al-paste layer on back-side of silicon solar cell using SnAg solder

M. Gao, Jiuchun Yan, Xinran Ma, 2018, Materials letters (General ed.).

Avoiding degradation and increasing joint strength of Al alloys by rapid ultrasonic soldering at low temperature

Xue-song Liu, Zhengwei Li, Jiuchun Yan, 2022, Journal of Materials Processing Technology.

Ultrasonic-assisted wetting and soldering of AlN ceramic by using a nonactive solder (Sn9Zn) in air

Zhengwei Li, Jiuchun Yan, Zhiwu Xu, 2021, Ceramics International.

Mechanism of the interfacial reaction between sapphire and Sn-3.5Ag-4Ti solder at a low temperature in air by ultrasound

Jiuchun Yan, Xinran Ma, Haoyang Tang, 2020 .

Ultrafast air bonding between SiC ceramic and SnAgTi alloy under the action of ultrasounds

X. Leng, Jiuchun Yan, Z. Xiu, 2018, Scientific Reports.

Low-temperature ultrasound-activated joining of ZrO2 ceramics using Sn-Al-Cu solder

Xiaoguo Song, Jiuchun Yan, Hongyun Zhao, 2019, Journal of the American Ceramic Society.

Floating of SiC particles in a Zn–Al filler metal

Jiuchun Yan, Zhiwu Xu, Shiqin Yang, 2008 .

Formation mechanism and mechanical performance of ultrasonic-assisted soldered joints of SiCp/2024Al composites at low temperature

Jiuchun Yan, Z. Xiu, S. Yang, 2022, The International Journal of Advanced Manufacturing Technology.

Surface tension and quasi-emulsion of cavitation bubble cloud.

C. Li, Jiuchun Yan, Pengfei Wu, 2017, Ultrasonics sonochemistry.

Rod-shaped cavitation bubble structure in ultrasonic field.

C. Li, Jiuchun Yan, Pengfei Wu, 2018, Ultrasonics sonochemistry.

Stability of cavitation structures in a thin liquid layer.

Jiuchun Yan, Pengfei Wu, Weijun Lin, 2017, Ultrasonics sonochemistry.

Microstructure and mechanical performance of AZ31/2024 dissimilar alloy joints using a multi-interlayer of Ni/Al/Zn via ultrasonic-assisted transient liquid phase bonding

Zilong Peng, Jiuchun Yan, Z. Cui, 2021 .

Control of Mg2Sn formation through ultrasonic-assisted transient liquid phase bonding of Mg to Al

Zhipeng Ma, Zhengwei Li, Jiuchun Yan, 2018 .

Microstructure and Mechanical Properties of Ultrasound-Assisted Soldered Al-50 wt.%Si/Al-27 wt.%Si Joints for Automotive Applications

Chang Xu, Jiuchun Yan, Yunru Chen, 2019, JOM.

Application of a new ultrasonic-assisted semi-solid brazing on dissimilar Al/Mg alloys

Zhipeng Ma, Zhengwei Li, Jiuchun Yan, 2018, Materials Letters.

Evolution of interfacial IMCs and mechanical performance of joints of Mg/Al dissimilar metals soldered by using Ga-coating protection

X. Leng, Jiuchun Yan, Han Yan, 2022, Materials Science and Engineering: A.

Effect of ultrasonic power on the microstructure and mechanical properties of TC4 alloy ultrasonically brazed joint using Zn filler

Xue-song Liu, Zhengwei Li, Jiuchun Yan, 2022, The International Journal of Advanced Manufacturing Technology.

Ultrasonic-Driven Spreading of Liquid Solder on Nonwetting Substrates

Zhengwei Li, Jiuchun Yan, Zhiwu Xu, 2020, Welding Journal.

Cavitation at filler metal/substrate interface during ultrasonic-assisted soldering. Part II: Cavitation erosion effect.

Xue-song Liu, Zhengwei Li, Jiuchun Yan, 2019, Ultrasonics sonochemistry.

Overview on Ultrasonic-assisted Welding and Its Scientific Issues

Jiuchun Yan, Jiuchun Yan, 2015 .

Dependence of wetting on cavitation during the spreading of a filler droplet on the ultrasonically agitated Al substrate

Zhengwei Li, Jiuchun Yan, Zhiwu Xu, 2021, Ultrasonics sonochemistry.

Vibration characteristics of aluminum surface subjected to ultrasonic waves and their effect on wetting behavior of solder droplets.

Jiuchun Yan, Zhiwu Xu, Shiqin Yang, 2014, Ultrasonics.

Microstructure evolution of SiC/SiC joints during ultrasonic-assisted air bonding using a Sn–Zn–Al alloy

Jiuchun Yan, Z. Xiu, Weibing Guo, 2018 .

Microstructure evolution and mechanical properties of ultrasonic-assisted soldering joints of 2024 aluminum alloys

X. Leng, Weiwei Zhao, Jiuchun Yan, 2011 .

High-performance joining technology for aluminium matrix composites using ultrasonic-assisted brazing

Xing Ma, Jiaheng Zhang, X. Leng, 2018 .

Evolution of interfacial structures and mechanical performance of sapphire and Sn–9Zn–2Al joints by ultrasound

Jiuchun Yan, Xinran Ma, Yan Xu, 2019, International Journal of Applied Ceramic Technology.

Migrating behaviors of interfacial elements and oxide layers during diffusion bonding of 6063Al alloys using Zn interlayer in air

X. Leng, Zhengwei Li, Pu Zhao, 2023, Journal of Materials Science & Technology.

Ultrafast ultrasonic-assisted transient liquid bonding Al/Mg in air

Zhengwei Li, Jiuchun Yan, Zhiwu Xu, 2022, Materials Characterization.

Low-temperature metallization of SiC ceramic with Sn0.5Zn via ultrasound assisted formation of an amorphous transition layer

Zhengwei Li, Jiuchun Yan, Zhiwu Xu, 2023, Ceramics International.

Bonding and strengthening mechanism on ultrasonic-assisted soldering of sapphire using Sn-3.5Ag-4Al solder

Jiuchun Yan, Z. Xiu, Xinran Ma, 2021 .

Microstructure and mechanical performance of composite joints of sapphire by ultrasonic-assisted brazing

W. Cui, Shuqi Li, Jiuchun Yan, 2018, Journal of Materials Processing Technology.

Microstructure and mechanical properties of Mg-Li alloy after TIG welding

X. Leng, R. Wu, Jiuchun Yan, 2011 .

Molecular dynamics simulation of tensile behavior of diffusion bonded Ni/Al nanowires

T. Sun, Yongda Yan, Junjie Zhang, 2013 .

Ultrasound-induced transient liquid-phase bonding of Mg/Cu dissimilar metals with Zn interlayer in air

Y. Nie, Tianxing Niu, Jiuchun Yan, 2020 .

Dissolution behavior of Cu in Cu-Ag and Cu-P brazing alloys using weld brazing

Jiuchun Yan, Xue-song Liu, Chang-wen Wang, 2011 .

Effect of intermetallic compounds on mechanical properties of copper joints ultrasonic-soldered with Sn-Zn alloy

Zhipeng Ma, Jiuchun Yan, Weibing Guo, 2017 .

Molecular dynamics simulation of tensile behavior of diffusion bonded Ni/Al nanowires

T. Sun, Yongda Yan, Junjie Zhang, 2013, Journal of Mechanical Science and Technology.

Interface structure characterization of Fe36Ni alloy with ultrasonic soldering

Jiuchun Yan, Jinghui Wei, Binghui Deng, 2013 .

Strengthening mechanism of Al/Sn interfaces: Study from experiments and first-principles calculation

X. Leng, Weiwei Zhao, Jiuchun Yan, 2021, Materials & Design (1980-2015).

Sonocapillary and wetting mechanism during ultrasonic brazing porous Si3N4 ceramics in air

Zhengwei Li, Jiuchun Yan, Zhiwu Xu, 2023, Surfaces and Interfaces.

Modelling behaviour of oxide film during vibration diffusion bonding of SiCp/A356 composite in air

Jiuchun Yan, Lin Ma, Hui-Bin Xu, 2004 .

Ultrasonic-promoted rapid TLP bonding of fine-grained 7034 high strength aluminum alloys.

X. Leng, Jiuchun Yan, Weibing Guo, 2017, Ultrasonics sonochemistry.

Effect of Ti–Si–Mg-Al wire on microstructure and mechanical properties of plasma arc in-situ welded joint of SiCp/Al composites

Jiuchun Yan, Y. Lei, Wenguang Hu, 2012 .

Interfacial structure and formation mechanism in ultrasonically aided liquid bonding of Al18B4O33/Al composites in air

Weiwei Zhao, Jiuchun Yan, Shiqin Yang, 2011 .