M. Berglund

发表

Isotopic compositions of the elements 2013 (IUPAC Technical Report)

W. Brand, M. Gröning, T. Prohaska, 2016 .

Methods to reduce interference effects in thermal conversion elemental analyzer/continuous flow isotope ratio mass spectrometry delta18O measurements of nitrogen-containing compounds.

B. Geypens, M. Berglund, P. Taylor, 2008, Rapid communications in mass spectrometry : RCM.

Mass discrimination during MC-ICPMS isotopic ratio measurements: Investigation by means of synthetic isotopic mixtures (IRMM-007 series) and application to the calibration of natural-like zinc materials (including IRMM-3702 and IRMM-651)

M. Berglund, R. Loss, C. Quétel, 2006, Journal of the American Society for Mass Spectrometry.

Atomic weights of the elements 2007 (IUPAC Technical Report)

M. Wieser, M. Berglund, 2009 .

Isotopic compositions of the elements 2009 (IUPAC Technical Report)

Michael Berglund, M. Wieser, M. Berglund, 2011 .

Calibrated measurements of the isotopic composition and atomic weight of the natural Li isotopic reference material IRMM-016

P. Bievre, M. Berglund, P. Taylor, 1997 .

Use of a Bayesian isotope mixing model to estimate proportional contributions of multiple nitrate sources in surface water.

B. De Baets, P. Boeckx, O. van Cleemput, 2012, Environmental pollution.

Absolute Isotope Amount Ratio Measurements on Gases Part I: Measurements of Isotope Amount Ratios - Basic Theory

P. Bievre, M. Varlam, M. Berglund, 2008 .

Preparation of Synthetic Isotope Mixtures for the calibration of carbon and oxygen isotope ratio measurements (in carbon dioxide) to the SI

P. Bievre, M. Varlam, M. Milton, 2007 .

Analysis of polycyclic aromatic hydrocarbons extracted from air particulate matter using a temperature programmable injector coupled to GC–C–IRMS

B. Geypens, A. Mikołajczuk, M. Berglund, 2010, Isotopes in environmental and health studies.

Preparation of argon Primary Measurement Standards for the calibration of ion current ratios measured in argon

M. D. Podesta, M. Berglund, S. Valkiers, 2010 .

Use of a temperature-programmable injector coupled to gas chromatography-combustion-isotope ratio mass spectrometry for compound-specific carbon isotopic analysis of polycyclic aromatic hydrocarbons.

B. Geypens, A. Mikołajczuk, M. Berglund, 2009, Rapid communications in mass spectrometry : RCM.

Preparation and characterisation of synthetic mixtures of lithium isotopes

P. De Biévre, M. Berglund, P. Taylor, 1998 .

Measurement of the Content of Sulfur in Gas Oils Using a High Pressure Asher, Isotope Dilution and Thermal Ionization Mass Spectrometry.

M. Berglund, M. Ostermann, P. Taylor, 2002 .

Total uncertainty budget as method evaluation criterion for the determination of tracer (111Cd) cadmium and indigenous cadmium in soil column effluents with ICP-MS

P. Seuntjens, K. Tirez, N. D. Brucker, 2001 .

Isotope ratio and isotope dilution measurements using axial inductively coupled plasma time of flight mass spectrometry

H. Emteborg, F. Adams, M. Berglund, 2000 .

Absolute Measurements of Isotope Amount Ratios on Gases Part II: Application of the Measurement Models Developed on Real Gases

P. Bievre, M. Varlam, M. Berglund, 2008 .

Methods of calibration in the direct analysis of solid samples by electrothermal atomic absorption spectrometry

D. C. Baxter, M. Berglund, D. Baxter, 1992 .

Atomic weights of the elements 2013 (IUPAC Technical Report)

Juris Meija, Paul De Bièvre, Johanna Irrgeher, 2016 .

Atomic weights of the elements 2011 (IUPAC Technical Report)

W. Brand, J. Böhlke, M. Gröning, 2013 .

The importance of the rollover absorbance and the Zeeman sensitivity ratio related coefficient for the accuracy in linearization of calibration curves in electrothermal atomic absorption spectrometry with Zeeman effect background correction

M. Berglund, 1996 .

A comparison of high accuracy isotope dilution techniques for the measurement of low level sulfur in gas oils

M. Berglund, M. Ostermann, P. Taylor, 2005 .

A critical evaluation of a multielement ETAAS system using line sources and a transversely heated graphite atomizer with Zeeman effect background correction

W. Frech, D. C. Baxter, M. Berglund, 1993 .

Effects of modifier mass and temperature gradients on analyte sensitivity in electrothermal atomic absorption spectrometry. Invited lecture

W. Frech, D. C. Baxter, M. Berglund, 1992 .

Computer program (CHMASS) for calculating theoretical characteristic mass values in electrothermal atomic absorption spectrometry

D. C. Baxter, M. Berglund, D. Baxter, 1992 .

Improving accuracy in the quantitation of overlapping, asymmetric, chromatographie peaks by deconvolution: theory and application to coupled gas chromatography atomic absorption spectrometry

Douglas C. Baxter, D. C. Baxter, M. Berglund, 1993 .

Achieving efficient, multi-element atomisation conditions for atomic absorption spectrometry using a platform-equipped, integrated-contact furnace and a palladium modifier

W. Frech, D. C. Baxter, M. Berglund, 1991 .

Certification of a 41Ca dose material for use in human studies (IRMM-3703) and a corresponding set of isotope reference materials for 41Ca measurements (IRMM-3701)

H. Synal, C. Geppert, K. Wendt, 2005 .

Classification of Nitrate Polluting Activities through Clustering of Isotope Mixing Model Outputs.

B. De Baets, P. Boeckx, O. van Cleemput, 2013, Journal of environmental quality.

Isotopes for improved management of nitrate pollution in aqueous resources: review of surface water field studies

P. Boeckx, M. Berglund, S. Duţă, 2011, Environmental science and pollution research international.

Present limitations and future prospects of stable isotope methods for nitrate source identification in surface- and groundwater.

B. De Baets, P. Boeckx, O. van Cleemput, 2009, Water research.

Modelling isotope fractionation in thermal ionisation mass spectrometry filaments having diffusion controlled emission

M. Berglund, R. Kessel, H. Ramebäck, 2002 .

On the determination of the true dead-time of a pulse-counting system in isotope ratio mass spectrometry

M. Berglund, P. Taylor, H. Ramebäck, 2001 .

SSITKA investigation of CO and H2 competitive adsorption at PEM fuel cell anode catalysts

M. Varlam, G. Tsotridis, J. C. Davies, 2010 .

Coefficient of contribution to the combined standard uncertainty

Raghu N. Kacker, Rüdiger Kessel, Michael Berglund, 2006 .

Test of the generalized standard addition method and linearization algorithms for the direct, simultaneous, multi-element analysis of solid samples by electrothermal atomic absorption spectrometry

D. C. Baxter, M. Berglund, D. Baxter, 1995 .

Atomic weights of the elements 2013 (xls)

W. Brand, P. Bievre, M. Gröning, 2013 .

Hydrogen peroxide (H2O2): a review of its use in homemade explosives

M. Berglund, M. Vahčič, Dimitris Kyprianou, 2019 .

Synthesis of 2,4,6-Trinitrotoluene (TNT) Using Flow Chemistry

M. Berglund, G. Rarata, V. Exarchou, 2020, Molecules.

Introduction to Isotope Dilution Mass Spectrometry (IDMS)

Michael Berglund, M. Berglund, 2004 .

Application of consistency checking to evaluation of uncertainty in multiple replicate measurements

Michael Berglund, Roger Wellum, M. Berglund, 2008 .

Producing SI-traceable reference values for Cd, Cr and Pb amount contents in polyethylene samples from the Polymer Elemental Reference Material (PERM) project using isotope dilution mass spectrometry

M. Berglund, M. Ostermann, K. Heumann, 2000 .

Updated certified values of the lithium isotopic reference materials IRMM-016, IRMM-015 and IRMM-615.

M. Berglund, S. Duţă, P. Taylor, 2009, Rapid communications in mass spectrometry : RCM.

The Importance of a Correct Dead Time Setting in Isotope Ratio Mass Spectrometry: Implementation of an Electronically Determined Dead Time to reduce Measurement Uncertainty

M. Berglund, H. Ramebäck, U. Nygren, 2006 .

Atomic weights of the elements 2013 (IUPAC Technical Report)

W. Brand, M. Gröning, T. Prohaska, 2016 .