S. Gangopadhyay

发表

Multi-objective Optimization of Machining Parameters During Dry Turning of AISI 304 Austenitic Stainless Steel Using Grey Relational Analysis

S. Gangopadhyay, S. K. Nayak, JatinKumar Patro, 2014 .

Evaluation on Effectiveness of CVD and PVD Coated Tools during Dry Machining of Incoloy 825

K. Maity, S. Gangopadhyay, A. Thakur, 2016 .

On Applicability of Multilayer Coated Tool in Dry Machining of Aerospace Grade Stainless Steel

S. Gangopadhyay, A. Mohanty, A. Thakur, 2016 .

Influences of micro-blasting as surface treatment technique on properties and performance of AlTiN coated tools

A. Satapathy, B. B. Jha, S. Mantry, 2017 .

Combinatorial synthesis of Cr1 − xAlxN and Ta1 − xAlxN coatings using industrial scale co-sputtering

C. Mitterer, N. Schalk, C. Czettl, 2016 .

Experimental investigation and optimization during the fabrication of arrayed structures using reverse EDM

S. Gangopadhyay, Gangadharudu Talla, Nageendra B. Kona, 2017 .

Evaluation of micro-features of chips of Inconel 825 during dry turning with uncoated and chemical vapour deposition multilayer coated tools

S. Gangopadhyay, A. Thakur, 2018 .

State-of-the-art in surface integrity in machining of nickel-based super alloys

S. Gangopadhyay, A. Thakur, S. Gangopadhyay, 2016 .

Comparative study of surface integrity aspects of Incoloy 825 during machining with uncoated and CVD multilayer coated inserts

S. Gangopadhyay, A. Thakur, A. Mohanty, 2014 .

Dry machining of nickel-based super alloy as a sustainable alternative using TiN/TiAlN coated tool

S. Gangopadhyay, A. Thakur, 2016 .

Investigation on Some Machinability Aspects of Inconel 825 During Dry Turning

S. Gangopadhyay, A. Thakur, A. Mohanty, 2015 .

Effect of cutting speed and CVD multilayer coating on machinability of Inconel 825

K. Maity, S. Gangopadhyay, A. Thakur, 2014 .

Influence of powder-mixed EDM on surface morphology and metallurgical alterations of Inconel 625

C. Biswas, S. Gangopadhyay, Gangadharudu Talla, 2022, Australian Journal of Mechanical Engineering.

Surface Integrity Enhancement of Incoloy 825 During Electric Discharge Machining

S. Gangopadhyay, Gangadharudu Talla, Roshin Thomas Varughese, 2021, Journal of The Institution of Engineers (India): Series C.

Effect of impregnated powder materials on surface integrity aspects of Inconel 625 during electrical discharge machining

S. Gangopadhyay, C. Biswas, S. Gangopadhyay, 2018 .

Influence of graphite powder mixed EDM on the surface integrity characteristics of Inconel 625

C. Biswas, S. Gangopadhyay, Gangadharudu Talla, 2017 .

Effect of Powder-Suspended Dielectric on the EDM Characteristics of Inconel 625

C. Biswas, S. Gangopadhyay, Gangadharudu Talla, 2016, Journal of Materials Engineering and Performance.

Comparative evaluation of machinability characteristics of Nimonic C-263 using CVD and PVD coated tools

S. Gangopadhyay, A. Thakur, B. Koyilada, 2016 .

Influence of Different Tool Electrode Materials on EDMed Surface Integrity of AISI P20 Tool Steel

C. Biswas, Shailesh Dewangan, S. Gangopadhyay, 2014 .

Effect of Coating Thickness on the Characteristics and Dry Machining Performance of TiN Film Deposited on Cemented Carbide Inserts Using CFUBMS

S. Paul, A. Chattopadhyay, S. Gangopadhyay, 2011 .

Modeling and multi-objective optimization of powder mixed electric discharge machining process of aluminum/alumina metal matrix composite

C. K. Biswas, Deepak Kumar Sahoo, D. Sahoo, 2015 .

Performance Evaluation of a Hard Composite Solid Lubricant Coating When Dry Machining of High-carbon Steel

S. Paul, A. Chattopadhyay, S. Gangopadhyay, 2018 .

Multi-response optimization of surface integrity characteristics of EDM process using grey-fuzzy logic-based hybrid approach

C. K. Biswas, Shailesh Dewangan, S. Gangopadhyay, 2015 .

Experimental Investigation and Analysis of EDM Characteristics of Inconel 825

S. Gangopadhyay, Gangadharudu Talla, Gangadharudu Talla, 2014 .

Influence of tribological properties on the performance of uncoated, CVD and PVD coated tools in machining of Incoloy 825

S. Gangopadhyay, A. Thakur, 2016 .

Modelling, simulation and experimental investigation for generating ‘I’ shaped contour on Inconel 825 using electro chemical machining

D. Sahoo, S. Gangopadhyay, A. Nayak, 2016 .

Optimization of the Surface Integrity Characteristics of EDM Process Using PCA based Grey Relation Investigation

Shailesh Dewangan, C. K. Biswas, C. Biswas, 2014 .

Study of surface integrity and dimensional accuracy in EDM using Fuzzy TOPSIS and sensitivity analysis

Shailesh Dewangan, S. Gangopadhyay, C. K. Biswas, 2015 .

Thermal Energy Distribution and Optimization of Process Parameters during Electrical Discharge Machining Of AISI D2 Steel

Sourav De, Rajarshi Mondal, Sangram Keshari Mohanty, 2015 .

Microstructural investigation and multi response optimisation using Fuzzy-TOPSIS during the electrochemical machining of Inconel 825

S. Gangopadhyay, A. Mohanty, Gangadharudu Talla, 2015 .

Microstructural Analysis and Multiresponse Optimization During ECM of Inconel 825 Using Hybrid Approach

A. Singh, S. Gangopadhyay, S. Anandita, 2015 .

Multi Response Optimization of Powder Mixed Electric Discharge Machining of Aluminum/Alumina Metal Matrix Composite Using Grey Relation Analysis

C. K. Biswas, C. Biswas, S. Gangopadhyay, 2014 .

Application of Analytical Simulation on Various Characteristics of Hole Quality during Micro-Drilling of Printed Circuit Board

S. Gangopadhyay, A. Thakur, S. Gangopadhyay, 2016 .

Experimental assessment on performance of TiN/TiCN/Al2O3/ZrCN coated tool during dry machining of Nimonic C-263

K. Maity, S. Gangopadhyay, A. Thakur, 2016 .

Effect of Ag addition on the oxidation behavior of CrAlN coating at elevated temperatures

A. Moharana, S. Gangopadhyay, S. S. Rajput, 2023, Materials Today: Proceedings.

Effects of roughing, finishing, and aggressive machining conditions on the milling performance of AISI 1045 steel using TiAlN coated inserts

S. Gangopadhyay, S. S. Rajput, F. Fernandes, 2023, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.