Baichen Wang

发表

Investigation on fatigue behavior and damage mechanism of C/BMI composites under hygrothermal environment

Yu Gao, Jin Wang, X. Cui, 2019, Polymer Degradation and Stability.

Enhancing hygrothermal resistance of aeronautical carbon fabric/epoxy composites via air plasma processing

Yu Gao, Junjie Li, Baichen Wang, 2017 .

Matrix formulation and interfacial enhancement of an aeronautical carbon fabric/epoxy composites fabricated via resin transfer molding (RTM) technique

Yu Gao, Baichen Wang, 2016 .

Influence of Surfactant Modification on Structure and Properties of CNT Hybrid Multiscale Composites

Yu Gao, Baichen Wang, Junshan Yin, 2014 .

Structure and properties of aeronautical composites using carbon nanotubes/epoxy dispersion as nanocomposite matrix

Baichen Wang, Junshan Yin, Li Wang, 2013 .

In situ generation of TiO2 in graphene aerogel and its epoxy composite for electromagnetic interference shielding performance

Shaowei Lu, Ke-ming Ma, Baichen Wang, 2022, Journal of Materials Science: Materials in Electronics.

Electrically conductive and elastoplastic carbon nanohybrid preform reinforced by physical cross-linking

Yu Gao, Junjie Li, Baichen Wang, 2019, Soft Materials.

Structure and electrically conductive properties of porous PAN‐based nanocomposites prepared by Pickering emulsion template method

Yu Gao, Baichen Wang, Shuo Dou, 2020 .

Electrical conductivity of poly(methyl methacrylate) nanocomposites containing interconnected carbon nanohybrid network based on Pickering emulsion strategy

Yu Gao, Pengfei Liang, Baichen Wang, 2020, Soft Materials.

Multifunctional reduced graphene oxide/carbon nanotubes/epoxy resin nanocomposites based on carbon nanohybrid preform

Yu Gao, Baichen Wang, Shuo Dou, 2020, Soft Materials.

Reduced graphene oxide/carbon nanotubes nanohybrids as preformed reinforcement for polystyrene composites

Yu Gao, Junjie Li, Baichen Wang, 2017 .

Comparison of two different carbon nanotubes-based hybrid multiscale composites with respect to mechanical and electrical properties

Yu Gao, Yongna Liu, Baichen Wang, 2017 .

Preparation and properties of hierarchical composites based on carbon nanotubes‐coated glass babric preform

Yu Gao, Baichen Wang, Li Wang, 2016 .

Stroke incidence and cognitive outcomes of intracranial atherosclerotic stenosis: study protocol for a multicenter, prospective, observational cohort study

Bo Wu, A-Ping Liu, Kun Han, 2022, Annals of translational medicine.

Interphase formation of a resin transfer molded silica–phenolics composites subjected to dynamic impregnation process

Yudong Huang, Baichen Wang, 2008 .

Hydroiodic acid and microwave reduced graphene oxide/PES-C films for flexible EMI shielding materials

Shaowei Lu, Ke-ming Ma, Baichen Wang, 2021, Diamond and Related Materials.

Microwave Irradiation of Graphene Aerogel and Its Use on the Electromagnetic Interference Shielding of BMI Nanocomposites

Shaowei Lu, Ke-ming Ma, Baichen Wang, 2020 .

Aging behavior of PBO fibers and PBO‐fiber‐reinforced PPESK composite after oxygen plasma treatment

Ping Chen, Baichen Wang, Chengshuang Zhang, 2009 .

Synthesis and Properties of a Novel Bismaleimide Resin Containing 1,3,4-Oxadiazole Moiety and the Blend Systems Thereof With Epoxy Resin

Ping Chen, Qi Yu, X. Xiong, 2011 .

Reaction kinetics and thermal properties of cyanate ester-cured epoxy resin with phenolphthalein poly(ether ketone)

Ping Chen, Ke-ming Ma, Baichen Wang, 2009 .

Influence of cyanate content on the morphology and properties of epoxy resins with phenolphthalein poly(ether ketone)

Ping Chen, Qi Yu, Ke-ming Ma, 2011 .

Investigation on the growth and structure of Fe-doped near-stoichiometric LiNbO3 crystal

Yuheng Xu, Baichen Wang, Furi Ling, 2004 .

A Study of the Effect of Oxygen Plasma Treatment on the Interfacial Properties of Carbon Fiber/Epoxy Composites

Ping Chen, Ke-ming Ma, Baichen Wang, 2010 .

Surface characteristic of poly(p‐phenylene terephthalamide) fibers with oxygen plasma treatment

Ping Chen, Baichen Wang, Chengshuang Zhang, 2008 .

Effect of solvents on adsorption of phenolic resin onto γ-aminopropyl-triethoxysilane treated silica fiber during resin transfer molding

Yudong Huang, Li Liu, Baichen Wang, 2006 .

Preparation and Properties of High Performance Phthalide-Containing Bismaleimide Modified Epoxy Matrices

Ping Chen, Qi Yu, X. Xiong, 2011 .

Microstructure and Properties of Ti80 Alloy Fabricated by Hydrogen-Assisted Blended Elemental Powder Metallurgy

O. Ivasishin, Dongdong Li, Baichen Wang, 2020, Frontiers in Materials.

Investigation on some matrix-dominated properties of hybrid multiscale composites based on carbon fiber/carbon nanotube modified epoxy

Baichen Wang, Junshan Yin, Li Wang, 2013 .

Experimental assessment on potential for processiblity of carbon nanotubes/epoxy system used as nanocomposites

Baichen Wang, Junshan Yin, Li Wang, 2013 .

Fabrication and properties of CNTs/carbon fabric hybrid multiscale composites processed via resin transfer molding technique

Ke-ming Ma, Baichen Wang, Baichen Wang, 2013 .

Effects of silica surface treatment on the impregnation process of silica fiber/phenolics composites

Liwu Liu, Yuewu Huang, Baichen Wang, 2008 .

Synthesis and properties of chain‐extended bismaleimide resins containing phthalide cardo structure

Ping Chen, Jianfeng Li, Qi Yu, 2010 .

Surface analysis of oxygen plasma treated poly(p-phenylene benzobisoxazole) fibers

Ping Chen, Baichen Wang, Chengshuang Zhang, 2008 .

Cure kinetics and thermal properties of novel bismaleimide containing phthalide cardo structure

Ping Chen, Qi Yu, X. Xiong, 2011 .

Effects of oxygen plasma treatment power on surface properties of poly(p-phenylene benzobisoxazole) fibers

Ping Chen, Q. Lei, Baichen Wang, 2008 .

The role of maleic anhydride functionalized graphene oxide in improving the interfacial properties of carbon fibre/bismaleimide composites: Maleic anhydride functionalized graphene oxide

Wei Li, Shaowei Lu, Xiaoqiang Wang, 2018 .

Plasma treatment of carbon fibers: Non-equilibrium dynamic adsorption and its effect on the mechanical properties of RTM fabricated composites

Ping Chen, Ke-ming Ma, Baichen Wang, 2011 .

Influences of Fibre Surface Treatment and Solvent Species on RTMED Silica Fibre/Phenolics Composites

Yu Gao, Yudong Huang, Ping Chen, 2006 .

Optimization of processing parameters to produce nearly dense fine-grained Ti–6Al–4V microstructures with a hydrogen-assisted BEPM approach

O. Ivasishin, Baichen Wang, D. Savvakin, 2021 .

Novel Pickering stabilizer constituted by graphene oxide and carbon nanotubes for Fabricating poly(methyl methacrylate) nanocomposites

Wei Li, Yu Gao, Yongna Liu, 2018 .

Surface modification of armos fibers with oxygen plasma treatment for improving interfacial adhesion with poly(phthalazinone ether sulfone ketone) resin

Ping Chen, Chun Lu, Baichen Wang, 2011 .

Improvement of interfacial adhesion for plasma‐treated aramid fiber‐reinforced poly(phthalazinone ether sulfone ketone) composite and fiber surface aging effects

Ping Chen, Baichen Wang, Chengshuang Zhang, 2009 .