J. San

发表

Thermodynamic Properties of Adsorbed Water on Silica Gel: Exergy Losses in Adiabatic Sorption Processes

W. Worek, W. Zengh, J. San, 1991 .

Boiling heat transfer characteristics in a horizontal tube with internal helical threads and that with a fin-module insert

J. San, Cheng Huang, 2013 .

Second-law analysis of a wet crossflow heat exchanger

Jung-Yang San, J. San, Chin-Lon Jan, 2000 .

Optimum jet-to-jet spacing of heat transfer for staggered arrays of impinging air jets

Jung-Yang San, J. San, Mao-De Lai, 2001 .

Entropy generation in combined heat and mass transfer

Z. Lavan, William M. Worek, Jung-Yang San, 1987 .

Impingement cooling of a confined circular air jet

Jung-Yang San, J. San, Chin-Hao Huang, 1997 .

Effects of jet-to-jet spacing and jet height on heat transfer characteristics of an impinging jet array

J. San, Jenq-Jye Chen, 2014 .

Impingement heat transfer of staggered arrays of air jets confined in a channel

J. San, Y. Tsou, Zheng-Chieh Chen, 2007 .

Effects of jet plate size and plate spacing on the stagnation Nusselt number for a confined circular air jet impinging on a flat surface

J. San, W. Shiao, 2006 .

Measurement of apparent solid-side mass diffusivity of a water vapor–silica gel system

J. San, Cheng-Chin Ni, 2002 .

Effects of characteristic parameters on heat transfer enhancement of repeated ring-type ribs in circular tubes

J. San, Wen-Chieh Huang, Cheng-An Chen, 2015 .

Experimental investigation on heat transfer and fluid friction correlations for circular tubes with coiled-wire inserts

J. San, Changcheng Chen, Wen-Chieh Huang, 2015 .

Adsorption of toluene on activated carbon in a packed bed

J. San, Yu-Ching Hsu, Liangyu Wu, 1998 .

Comparison among three adsorption pairs for using as the working substances in a multi-bed adsorption heat pump.

J. San, Weining Lin, 2008 .

Analysis of the performance of a multi-bed adsorption heat pump using a solid-side resistance model

Jung-Yang San, J. San, 2006 .

Validity of solid-side mass diffusivity in simulation of water vapor adsorbed by silica gel in packed beds

J. San, Cheng-Chin Ni, Sheng-Hsiang Hsu, 2002 .

Mass diffusion in a spherical microporous particle with thermal effect and gas-side mass transfer resistance

Jung-Yang San, J. San, Cheng-Chin Ni, 2000 .

Modeling and testing of a silica gel packed-bed system

J. San, Gwo-Donq Jiang, 1994 .

Heat transfer characteristics of a helical heat exchanger

Chih-Hsiang Hsu, Jung-Yang San, J. San, 2012 .

Heat transfer enhancement of transverse ribs in circular tubes with consideration of entrance effect

J. San, Wen-Chieh Huang, 2006 .

Second-law performance of heat exchangers for waste heat recovery

Jung-Yang San, J. San, 2010 .

Performance of a serpentine heat exchanger: Part II – Second-law efficiency

Jung-Yang San, J. San, Kai-Li Pai, 2009 .

Entropy generation in convective heat transfer and isothermal convective mass transfer

Z. Lavan, W. M. Worek, Jung-Yang San, 1987 .

Testing of a lab-scale four-bed adsorption heat pump

Jung-Yang San, J. San, Fu-Kang Tsai, 2014 .

Performance of a multi-bed adsorption heat pump using SWS-1L composite adsorbent and water as the working pair

J. San, H. Hsu, 2009 .

Heat and mass transfer in a two-dimensional cross-flow regenerator with a solid conduction effect

Jung-Yang San, J. San, 1993 .

The effects of desiccant content and purging process on the performance of a rotary desiccant cooling system

J. San, 1988 .

Effect of axial solid heat conduction and mass diffusion in a rotary heat and mass regenerator

Jung-Yang San, J. San, S. C. Hsiau, 1993 .

Performance of a serpentine heat exchanger: Part I – Effectiveness and heat transfer characteristics

Jung-Yang San, J. San, Gean-Sheng Lin, 2009 .