I. Ahmed

发表

Cyclic pressure on compression-moulded bioresorbable phosphate glass fibre reinforced composites

J. Segal, D. Grant, F. Betanzos, 2016 .

DSC as a rapid test method for determining Tg of phosphate based glass fibres

Jonathan C. Knowles, Ea Abou Neel, Ifty Ahmed, 2003 .

Evolution of silicate bioglass particles as porous microspheres with a view towards orthobiologics

I. Ahmed, Y. W. Sari, M. Islam, 2022, Journal of biomaterials applications.

Hot Topics in Biomaterials

I. Ahmed, 2014 .

Wet and dry flexural high cycle fatigue behaviour of fully bioresorbable glass fibre composites: in-situ polymerisation versus laminate stacking

C. Rudd, Jiawa Lu, D. Irvine, 2017 .

Retention of mechanical properties and cytocompatibility of a phosphate-based glass fiber/polylactic acid composite.

C. Rudd, J. Knowles, E. A. Abou Neel, 2009, Journal of biomedical materials research. Part B, Applied biomaterials.

Glass microparticle‐ versus microsphere‐filled experimental dental adhesives

J. Knowles, S. Valappil, E. A. Abou Neel, 2019, Journal of Applied Polymer Science.

Cytocompatibility and Mechanical Properties of Short Phosphate Glass Fibre Reinforced Polylactic Acid (PLA) Composites: Effect of Coupling Agent Mediated Interface

G. Walker, A. Parsons, I. Ahmed, 2012, Journal of functional biomaterials.

Preparation and characterization of composites using blends of divinylbenzene‐based hyperbranched and linear functionalized polymers

Sumaya F. Kabir, D. Irvine, A. Parsons, 2021, Polymers for Advanced Technologies.

Comparison of thermal, thermomechanical, and rheological properties of blends of divinylbenzene‐based hyperbranched and linear functionalized polymers

Sumaya F. Kabir, D. Irvine, A. Parsons, 2020, Journal of Applied Polymer Science.

Effect of iron on the surface, degradation and ion release properties of phosphate-based glass fibres.

A. Boccaccini, A. Bismarck, J. Knowles, 2005, Acta biomaterialia.

The mechanical property, degradation and cytocompatibility analysis of novel phosphate glass fiber textiles

Xiaoling Liu, A. Parsons, I. Ahmed, 2018, Textile Research Journal.

Core/Clad Phosphate Glass Fibres Containing Iron and/or Titanium

C. Rudd, N. Sharmin, D. Furniss, 2015 .

HEAT-TREATMENT OF PHOSPHATE GLASS FIBRES AND ITS EFFECT ON COMPOSITE PROPERTY RETENTION

C. Rudd, A. Parsons, I. Ahmed, 2022 .

Developing Echogenic Materials as Catheters for Use with Ultrasound.

D. Irvine, I. Ahmed, A. Whittington, 2022, ACS biomaterials science & engineering.

The effect of cellulose nanowhiskers on the flexural properties of self-reinforced polylactic acid composites

C. Rudd, W. Thielemans, I. Ahmed, 2014 .

Bioactive calcium phosphate–based glasses and ceramics and their biomedical applications: A review

E. A. Abou Neel, D. Grant, I. Ahmed, 2017, Journal of tissue engineering.

Tailoring Pyro- and Orthophosphate Species to Enhance Stem Cell Adhesion to Phosphate Glasses

I. Ahmed, J. Titman, V. Sottile, 2021, International journal of molecular sciences.

NUMERICAL INTERPRETATION OF FULLY BIO- RESORBABLE GLASS FIBRE REINFORCED COMPOSITES

Jiawa Lu, Xiaogang Yang, L. Harper, 2017 .

Effect of processing on microstructure, mechanical properties and dissolution behaviour in SBF of Bioglass (45S5) coatings deposited by Suspension High Velocity Oxy Fuel (SHVOF) thermal spray

D. Grant, T. Hussain, A. Nommeots-Nomm, 2019, Surface and Coatings Technology.

Flexible and transparent films produced from cellulose nanowhisker reinforced agarose.

Sumaya F. Kabir, D. Grant, I. Ahmed, 2018, Carbohydrate polymers.

Phosphate-based glass fiber vs. bulk glass: Change in fiber optical response to probe in vitro glass reactivity.

V. Aallos, L. Petit, J. Massera, 2014, Materials science & engineering. C, Materials for biological applications.

Development of microspheres for biomedical applications: a review

I. Ahmed, U. Patel, K. Hossain, 2014, Progress in Biomaterials.

Simulating damage onset and evolution in fully bio-resorbable composite under three-point bending.

Jiawa Lu, Xiaogang Yang, L. Harper, 2018, Journal of the mechanical behavior of biomedical materials.

Novel bioresorbable phosphate glass fiber textile composites for medical applications

C. Rudd, Xiaoling Liu, Jingsong Liu, 2018 .

Novel bioresorbable textile composites for medical applications

C. Rudd, Xiaoling Liu, Jingsong Liu, 2017 .

Live Quantitative Monitoring of Mineral Deposition in Stem Cells Using Tetracycline Hydrochloride

B. Scammell, I. Ahmed, V. Sottile, 2018, Tissue engineering. Part C, Methods.

Porous calcium phosphate glass microspheres for orthobiologic applications.

B. Scammell, A. Kennedy, D. Grant, 2018, Acta biomaterialia.

Bioresorbable screws reinforced with phosphate glass fibre: manufacturing and mechanical property characterisation.

C. Rudd, A. Parsons, I. Ahmed, 2013, Journal of the mechanical behavior of biomedical materials.

DEVELOPING AN IN-SITU POLYMERISATION PROCESS FOR BIOCOMPOSITE MANUFACTURE

C. Rudd, D. Irvine, A. Parsons, 2015 .

Stuart, Bryan and Gimeno-Fabra, Miquel and Segal, Joel and Ahmed, Ifty and Grant, David M. (2015) Degradation and characterization of resorbable phosphate-based glass thin-film coatings

J. Segal, D. Grant, M. Gimeno-Fabra, 2016 .

Degradation and Characterisation of Resorbable Phosphate-Based Glass Thin Film Coatings Applied by RF magnetron Sputtering

J. Segal, D. Grant, M. Gimeno-Fabra, 2016 .

Degradation and Characterization of Resorbable Phosphate-Based Glass Thin-Film Coatings Applied by Radio-Frequency Magnetron Sputtering.

J. Segal, D. Grant, M. Gimeno-Fabra, 2015, ACS applied materials & interfaces.

Physico-chemical and mechanical properties of nanocomposites prepared using cellulose nanowhiskers and poly(lactic acid)

C. Rudd, G. Walker, W. Thielemans, 2011, Journal of Materials Science.

Evaluating the purification and activation of metal-organic frameworks from a technical and circular economy perspective

I. Ahmed, R. Ferrari, Andrea Laybourn, 2021 .

Effect of magnesium content on bioactivity of near invert phosphate‐based glasses

T. Islam, N. Sharmin, A. Parsons, 2017 .

Preferential sputtering in phosphate glass systems for the processing of bioactive coatings

J. Segal, D. Grant, M. Gimeno-Fabra, 2015 .

Accelerated in vitro degradation properties of polylactic acid/phosphate glass fibre composites

C. Rudd, A. Parsons, I. Ahmed, 2015, Journal of Materials Science.

In-situ polymerisation of fully bioresorbable polycaprolactone/phosphate glass fibre composites: In vitro degradation and mechanical properties.

C. Rudd, D. Irvine, A. Parsons, 2016, Journal of the mechanical behavior of biomedical materials.

Magnesium coated phosphate glass fibers for unidirectional reinforcement of polycaprolactone composites.

C. Rudd, Xiaoling Liu, D. Grant, 2015, Journal of biomedical materials research. Part B, Applied biomaterials.

Mechanical, crystallisation and moisture absorption properties of melt drawn polylactic acid fibres

C. Rudd, W. Thielemans, A. Parsons, 2014 .

Mechanical and Degradation Properties of Phosphate Based Glass Fibre/PLA Composites with different Fibre Treatment Regimes

I. A. Jones, C. Rudd, G. Walker, 2010 .

Adsorption studies and effect of heat treatment on porous glass microspheres

R. Gomes, I. Ahmed, R. Ferrari, 2021, International Journal of Applied Glass Science.

Yttrium doped phosphate-based glasses: structural and degradation analyses

A. Lewis, I. Ahmed, J. Titman, 2020, Biomedical Glasses.

The Use of Biomaterials in Internal Radiation Therapy

R. Layfield, I. Ahmed, A. Arafat, 2020, Recent Progress in Materials.

Flame-Spheroidized Phosphate-Based Glass Particles with Improved Characteristics for Applications in Mesenchymal Stem Cell Culture Therapy and Tissue Engineering.

D. Grant, I. Ahmed, V. Sottile, 2018, ACS applied materials & interfaces.

Upcycling Glass Waste into Porous Microspheres for Wastewater Treatment Applications: Efficacy of Dye Removal

E. Lester, I. Ahmed, Sabrin A. Samad, 2022, Materials.

Wet and Dry Flexural High Cycle Fatigue Behaviour of Fully 1 Bioresorbable Glass Fibre Composites : In-situ Polymerisation versus 2 Laminate Stacking

C. Rudd, Jiawa Lu, D. Irvine, 2017 .

Tailored Additives for Incorporation of Antibacterial Functionality Into Laser Sintered Parts

C. Majewski, J. Shepherd, I. Ahmed, 2022, Frontiers in Biomaterials Science.

Rheological, Surface Tension and Conductivity Insights on the Electrospinnability of Poly(lactic-co-glycolic acid)-hyaluronic Acid Solutions and Their Correlations with the Nanofiber Morphological Characteristics

S. Ramakrishna, C. Rudd, I. Ahmed, 2022, Polymers.

Cytocompatibility, degradation, mechanical property retention and ion release profiles for phosphate glass fibre reinforced composite rods.

C. Rudd, A. Parsons, I. Ahmed, 2013, Materials science & engineering. C, Materials for biological applications.

L-DOPA coating improved phosphate glass fibre strength and fibre/matrix interface.

C. Rudd, N. Sharmin, A. Parsons, 2022, Journal of the mechanical behavior of biomedical materials.

Developing Porous Ortho- and Pyrophosphate-Containing Glass Microspheres; Structural and Cytocompatibility Characterisation

R. Layfield, I. Ahmed, J. Titman, 2022, Bioengineering.

Solid State NMR as a probe of inorganic materials:Examples from glasses and sol-gels

J. Knowles, Mark E. Smith, P. Thomas, 2006 .

Phosphate glasses for tissue engineering: Part 1. Processing and characterisation of a ternary-based P2O5-CaO-Na2O glass system.

J. Knowles, M. Lewis, I. Ahmed, 2004, Biomaterials.

Developing highly nanoporous titanate structures via wet chemical conversion of DC magnetron sputtered titanium thin films.

D. Grant, I. Ahmed, R. Felfel, 2020, Journal of colloid and interface science.

Mechanical, structural and dissolution properties of heat treated thin-film phosphate based glasses

J. Segal, D. Grant, M. Gimeno-Fabra, 2017 .

Felfel, R.M. and Poocza, Leander and Gimeno-Fabra, Miquel and Milde, Tobias and Hildebrand, Gerhard and Ahmed, Ifty and Scotchford, Colin and Sottile, Virginie and Grant, David M. and Liefeith, Klaus (2016) In vitro degradation and mechanical properties of PLA-PCL

D. Grant, G. Hildebrand, K. Liefeith, 2017 .

In vitro degradation and mechanical properties of PLA-PCL copolymer unit cell scaffolds generated by two-photon polymerization

D. Grant, G. Hildebrand, K. Liefeith, 2016, Biomedical materials.

Production of High Silicon-Doped Hydroxyapatite Thin Film Coatings via Magnetron Sputtering: Deposition, Characterisation, and In Vitro Biocompatibility

G. Walker, D. Grant, I. Ahmed, 2020, Coatings.

Insights into structural characterisation and thermal properties of compositionally equivalent vapour-condensed and melt-quenched glasses

D. Grant, M. Gimeno-Fabra, I. Ahmed, 2016 .

Structure–properties relationships in fibre drawing of bioactive phosphate glasses

F. Muñoz, G. Tricot, L. Muñoz-Senovilla, 2017, Journal of Materials Science.

Degradation properties and microstructural analysis of 40P2O5–24MgO–16CaO–16Na2O–4Fe2O3 phosphate glass fibres

C. Rudd, G. Walker, A. Parsons, 2013 .

Characterization of Sodium and Calcium Addition on Immediate Aqueous Interactions of Binary Borate Glasses by Dynamic Vapour Sorption with In-Situ Raman

William C. Lepry, S. Nazhat, K. Waters, 2023, SSRN Electronic Journal.

Structural, thermal, in vitro degradation and cytocompatibility properties of P2O5-B2O3-CaO-MgO-Na2O-Fe2O3 glasses

C. Rudd, Xiaoling Liu, Jingsong Liu, 2017 .

Effect of phosphate-based glass fibre surface properties on thermally produced poly(lactic acid) matrix composites

Ifty Ahmed, C. Rudd, S. Nazhat, 2011, Journal of materials science. Materials in medicine.

Cytocompatibility and Effect of Increasing MgO Content in a Range of Quaternary Invert Phosphate-based Glasses

C. Rudd, G. Walker, A. Parsons, 2010, Journal of biomaterials applications.

Weight loss, ion release and initial mechanical properties of a binary calcium phosphate glass fibre/PCL composite.

J C Knowles, C. Rudd, J. Knowles, 2008, Acta biomaterialia.

Developing Unique Geometries of Phosphate-Based Glasses and their Prospective Biomedical Applications

I. Ahmed, Hong Ren, Jonathan Booth, 2019, Johnson Matthey Technology Review.

Effects of ZnO addition on thermal properties, degradation and biocompatibility of P45Mg24Ca16Na(15−x)Znx glasses

C. Rudd, N. Sharmin, A. Parsons, 2019, Biomedical Glasses.

Quantification of Anion and Cation Release from a Range of Ternary Phosphate-based Glasses with Fixed 45 mol% P2O5

J. Knowles, S. Nazhat, M. Lewis, 2005, Journal of biomaterials applications.

Characterisation of antibacterial copper releasing degradable phosphate glass fibres.

J. Knowles, S. Nazhat, J. Pratten, 2005, Biomaterials.

Processing, characterisation and biocompatibility of iron-phosphate glass fibres for tissue engineering.

I Olsen, J C Knowles, J. Knowles, 2004, Biomaterials.

Phosphate Glasses

J. Rocherullé, F. Muñoz, I. Ahmed, 2019, Springer Handbook of Glass.

Effect of Si and Fe doping on calcium phosphate glass fibre reinforced polycaprolactone bone analogous composites.

C. Rudd, S. Nazhat, I. Ahmed, 2012, Acta biomaterialia.

Modulation of polycaprolactone composite properties through incorporation of mixed phosphate glass formulations.

B. Marelli, C. Rudd, S. Nazhat, 2010, Acta biomaterialia.

Effect of boron oxide addition on fibre drawing, mechanical properties and dissolution behaviour of phosphate-based glass fibres with fixed 40, 45 and 50 mol% P2O5

C. Rudd, N. Sharmin, A. Parsons, 2014, Journal of biomaterials applications.

In vitro degradation, flexural, compressive and shear properties of fully bioresorbable composite rods.

C. Rudd, G. Walker, A. Parsons, 2011, Journal of the mechanical behavior of biomedical materials.

Interfacial properties of phosphate glass fibres/PLA composites: Effect of the end functionalities of oligomeric PLA coupling agents

Chris D. Rudd, Ifty Ahmed, Andrew J. Parsons, 2010 .

Chemical characterization of a degradable polymeric bone adhesive containing hydrolysable fillers and interpretation of anomalous mechanical properties.

Ifty Ahmed, Jonathan C Knowles, J. Knowles, 2009, Acta biomaterialia.

Controlled microchannelling in dense collagen scaffolds by soluble phosphate glass fibers.

Eleanor Stride, Nader Saffari, Ifty Ahmed, 2007, Biomacromolecules.

Antimicrobial effect of silver-doped phosphate-based glasses.

Michael T. Wilson, J. Knowles, M. Wilson, 2006, Journal of biomedical materials research. Part A.

The structure and properties of silver-doped phosphate-based glasses

J. Knowles, S. Nazhat, S. Valappil, 2007 .

Phosphate glasses for tissue engineering: Part 2. Processing and characterisation of a ternary-based P2O5-CaO-Na2O glass fibre system.

J. Knowles, M. Lewis, I. Ahmed, 2004, Biomaterials.

Effect of varying the Mg with Ca content in highly porous phosphate-based glass microspheres.

I. Ahmed, V. Sottile, M. Islam, 2020, Materials science & engineering. C, Materials for biological applications.

Effects of Fe2O3 addition and annealing on the mechanical and dissolution properties of MgO-and CaO-containing phosphate glass fibres for bio-applications

Chris D. Rudd, Ifty Ahmed, Chenkai Zhu, 2018, Biomedical Glasses.

Structural, thermal and dissolution properties of MgO- and CaO-containing borophosphate glasses: effect of Fe2O3 addition

Chris D. Rudd, Ifty Ahmed, Nusrat Sharmin, 2017, Journal of Materials Science.

Phosphate Glass Fibres and Their Composites

D. Grant, I. Ahmed, R. Felfel, 2016 .

Effect of Boron Addition on the Thermal, Degradation, and Cytocompatibility Properties of Phosphate-Based Glasses

C. Rudd, N. Sharmin, D. Furniss, 2013, BioMed research international.

Influence of screw holes and gamma sterilization on properties of phosphate glass fiber-reinforced composite bone plates

C. Rudd, B. Scammell, L. Harper, 2013, Journal of biomaterials applications.

Bioresorbable composite screws manufactured via forging process: pull-out, shear, flexural and degradation characteristics.

C. Rudd, A. Parsons, I. Ahmed, 2013, Journal of the mechanical behavior of biomedical materials.

Material characterisation and cytocompatibility assessment of quinternary phosphate glasses

G. Walker, A. Parsons, I. Ahmed, 2012, Journal of Materials Science: Materials in Medicine.

Investigation of Crystallinity, Molecular Weight Change, and Mechanical Properties of PLA/PBG Bioresorbable Composites as Bone Fracture Fixation Plates

C. Rudd, G. Walker, A. Parsons, 2012, Journal of biomaterials applications.

Composites for bone repair: phosphate glass fibre reinforced PLA with varying fibre architecture

I. A. Jones, C. D. Rudd, C. A. Scotchford, 2011, Journal of materials science. Materials in medicine.

Comparison of phosphate-based glasses in the range 50P(2)O(5)-(50-x)CaO-xNa(2)O prepared using different precursors

C. Rudd, J. Knowles, S. Nazhat, 2008 .

A structural study of sol–gel and melt-quenched phosphate-based glasses

J. Knowles, Mark E. Smith, D. Carta, 2007 .

Development of phosphate-based glass fibers for biomedical applications

I. Ahmed, M. S. Hasan, R. Felfel, 2014 .

Porous Phosphate-Based Glass Microspheres Show Biocompatibility, Tissue Infiltration, and Osteogenic Onset in an Ovine Bone Defect Model.

B. Scammell, D. Grant, I. Ahmed, 2019, ACS applied materials & interfaces.

The effect of MgO/TiO2 on structural and crystallization behavior of near invert phosphate-based glasses.

N. Sharmin, G. Rance, A. Parsons, 2019, Journal of biomedical materials research. Part B, Applied biomaterials.

Phosphate Glass Fibre Composites for Bone Repair

Chris D. Rudd, Ifty Ahmed, Andrew J. Parsons, 2009 .

Long-Term Culture of Stem Cells on Phosphate-Based Glass Microspheres: Synergistic Role of Chemical Formulation and 3D Architecture.

Emily F. Smith, D. Grant, I. Ahmed, 2021, ACS applied bio materials.

Formulating injectable pastes of porous calcium phosphate glass microspheres for bone regeneration applications.

B. Scammell, N. Kapur, I. Ahmed, 2020, Journal of the mechanical behavior of biomedical materials.

Effect of dissolution rate and subsequent ion release on cytocompatibility properties of borophosphate glasses

N. Sharmin, C. Pang, A. Parsons, 2019, Biomedical Glasses.

Cytocompatibility, mechanical and dissolution properties of high strength boron and iron oxide phosphate glass fibre reinforced bioresorbable composites.

C. Rudd, N. Sharmin, A. Parsons, 2016, Journal of the mechanical behavior of biomedical materials.

X-ray absorption spectroscopy and high-energy XRD study of the local environment of copper in antibacterial copper-releasing degradable phosphate glasses

J. Knowles, Mark E. Smith, I. Ahmed, 2006 .

Biodegradable Composite Materials as Bone Regenerative Implants

I. A. Jones, C. Rudd, G. Walker, 2009 .

The Glass Transition Temperature of Iron and Titanium Containing Phosphate Based Glasses

C. Rudd, D. Furniss, A. Parsons, 2015 .

A high-energy X-ray diffraction, 31P and 11B solid-state NMR study of the structure of aged sodium borophosphate glasses

D. Qiu, J. Knowles, Mark E. Smith, 2008 .

The effect of composition on the structure of sodium borophosphate glasses

D. Qiu, J. Knowles, Mark E. Smith, 2008 .

Effect of boron oxide addition on the viscosity-temperature behaviour and structure of phosphate-based glasses.

Ifty Ahmed, Nusrat Sharmin, Daniel Boyd, 2017, Journal of biomedical materials research. Part B, Applied biomaterials.

Thermal and crystallization kinetics of yttrium‐doped phosphate‐based glasses

A. Lewis, I. Ahmed, E. Barney, 2019, International Journal of Applied Glass Science.

An X-ray absorption spectroscopy study of the local environment of iron in degradable iron–phosphate glasses

D. Qiu, J. Knowles, I. Ahmed, 2008 .

Investigation of the Mixed Alkali Effect in a Range of Phosphate Glasses

J. Knowles, E. A. Abou Neel, I. Ahmed, 2007 .

Quantification of anions and cations from ternary phosphate based glasses with fixed 50 and 55 mol% P2O5 using ion chromatography

J. Knowles, I. Ahmed, M. Lewis, 2005 .

Production and characterisation of novel phosphate glass fibre yarns, textiles, and textile composites for biomedical applications.

C. Rudd, N. Sharmin, Xiaoling Liu, 2019, Journal of the mechanical behavior of biomedical materials.

Structure, viscosity and fibre drawing properties of phosphate-based glasses: effect of boron and iron oxide addition

Chris D. Rudd, Ifty Ahmed, Nusrat Sharmin, 2016, Journal of Materials Science.

Functionalised SiO2 modified icephobic nanocomposite electrospun membranes for outdoor electromagnetic shielding applications

C. Smartt, I. Ahmed, X. Hou, 2022, Polymer.

Flame spheroidisation of dense and porous Ca2Fe2O5 microspheres

P. D. Brown, N. Neate, I. Ahmed, 2020, Materials Advances.

Tailoring the degradation rate of magnesium through biomedical nano-porous titanate coatings

B. Hanby, D. Grant, I. Ahmed, 2020, Journal of Magnesium and Alloys.

Developing alkaline titanate surfaces for medical applications

D. Grant, I. Ahmed, R. Felfel, 2023, International Materials Reviews.

Investigating the use of coupling agents to improve the interfacial properties between a resorbable phosphate glass and polylactic acid matrix

Ifty Ahmed, C. Rudd, G. Walker, 2013, Journal of biomaterials applications.

Mimicking Bone Structure and Function with Structural Composite Materials

C. Rudd, A. Parsons, I. Ahmed, 2010 .

In-vitro cell interaction and apatite forming ability in simulated body fluid of ICIE16 and 13-93 bioactive glass coatings deposited by an emerging suspension high velocity oxy fuel (SHVOF) thermal spray

D. Grant, T. Hussain, A. Nommeots-Nomm, 2020, Surface and Coatings Technology.

Tubular Scaffold with Shape Recovery Effect for Cell Guide Applications

N. Sharmin, I. Ahmed, R. Felfel, 2015, Journal of functional biomaterials.

Correction: Ga and Ce ion-doped phosphate glass fibres with antibacterial properties and their composite for wound healing applications.

W. Goldmann, A. Boccaccini, A. Parsons, 2019, Journal of materials chemistry. B.

Ga and Ce ion-doped phosphate glass fibres with antibacterial properties and their composite for wound healing applications.

W. Goldmann, A. Boccaccini, A. Parsons, 2019, Journal of materials chemistry. B.

Characterization of potential nanoporous sodium titanate film formation on Ti6Al4V and TiO2 microspherical substrates via wet-chemical alkaline conversion

D. Grant, I. Ahmed, T. P. Cooper, 2022, Materials Characterization.

The influence of coupling agents on mechanical property retention and long-term cytocompatibility of phosphate glass fibre reinforced PLA composites.

G. Walker, A. Parsons, I. Ahmed, 2013, Journal of the mechanical behavior of biomedical materials.

Single Solvent‐Based Film Casting Method for the Production of Porous Polymer Films

D. Grant, I. Ahmed, R. Felfel, 2018 .

Cytocompatibility assessment of chemical surface treatments for phosphate glass to improve adhesion between glass and polyester.

G. Walker, A. Parsons, I. Ahmed, 2013, Journal of biomedical materials research. Part A.

Fish biowaste gelatin coated phosphate-glass fibres for wound-healing application

H. Loh, S. Lim, I. Ahmed, 2020 .

Effect of cellulose nanowhiskers on surface morphology, mechanical properties, and cell adhesion of melt-drawn polylactic Acid fibers.

C. Rudd, W. Thielemans, I. Ahmed, 2014, Biomacromolecules.

Influence of compatibilizing agent molecular structure on the mechanical properties of phosphate glass fiber‐reinforced PLA composites

Chris D. Rudd, Kristofer J. Thurecht, Ifty Ahmed, 2010 .

High cellulose nanowhisker content composites through cellosize bonding

C. Rudd, W. Thielemans, A. Parsons, 2012 .

Patient Perspectives on Use of Stem Cells to Treat Osteoporosis

B. Scammell, O. Sahota, I. Ahmed, 2020 .

Manufacturing processes for polymeric micro and nanoparticles and their biomedical applications

I. Ahmed, A. Braz, 2017 .

Production of Nano Hydroxyapatite and Mg-Whitlockite from Biowaste-Derived products via Continuous Flow Hydrothermal Synthesis: A Step towards Circular Economy

E. Lester, D. Grant, I. Ahmed, 2023, Materials.

Effects of Adding Resorbable Phosphate Glass Fibres and PLA to Calcium Phosphate Bone Cements

Nicholas J. Carpenter, D. McNally, I. Ahmed, 2014, Journal of applied biomaterials & functional materials.

Phosphate glass fibers facilitate proliferation and osteogenesis through Runx2 transcription in murine osteoblastic cells.

A. Boccaccini, M. Li, A. Qian, 2019, Journal of biomedical materials research. Part A.

Tailoring absorptivity of highly reflective Ag powders by pulsed-direct current magnetron sputtering for additive manufacturing processes

A. Clare, L. Grover, L. Carter, 2023, Journal of Materials Processing Technology.

Micropatterning of nanocomposite polymer scaffolds using sacrificial phosphate glass fibers for tendon tissue engineering applications.

T. Serra, F. Alshomer, D. Kalaskar, 2017, Nanomedicine : nanotechnology, biology, and medicine.

Ferromagnetic Cytocompatible Glass‐Ceramic Porous Microspheres for Magnetic Hyperthermia Applications

N. Weston, I. Ahmed, N. Morley, 2023, Advanced Materials Interfaces.

Osteogenic potential of solid and porous phosphate glass microspheres as pulp capping materials

E. A. Abou Neel, I. Ahmed, A. Arjuna, 2023, Journal of Non-Crystalline Solids.

Optimisation of the Flame Spheroidisation Process for the Rapid Manufacture of Fe3O4-Based Porous and Dense Microspheres

I. Ahmed, N. Morley, E. Steer, 2023, Molecules.

INVESTIGATING THE USE OF CHITOSAN AS A COUPLING AGENT TO IMPROVE THE INTERFACIAL PROPERTIES OF PHOSPHATE GLASS FIBRE/POLYCAPROLACTONE COMPOSITES

C. Rudd, Xiaoling Liu, A. Parsons, 2017 .

Processing and characterization of phosphate glass fiber/polylactic acid commingled yarn composites for commercial production.

C. Rudd, N. Sharmin, Jiapeng Fu, 2020, Journal of biomedical materials research. Part B, Applied biomaterials.

Compositional dependency on dissolution rate and cytocompatibility of phosphate-based glasses: Effect of B2O3 and Fe2O3 addition

N. Sharmin, A. Parsons, I. Ahmed, 2017, Journal of tissue engineering.

Finite element modelling of the flexural performance of resorbable phosphate glass fibre reinforced PLA composite bone plates.

C. Qian, I. Ahmed, R. Felfel, 2012, Journal of the mechanical behavior of biomedical materials.

Electrospun nanofibre membrane based transparent slippery liquid-infused porous surfaces with icephobic properties

I. Ahmed, X. Hou, Mahmut Taş, 2020 .

Live Simultaneous Monitoring of Mineral Deposition and Lipid Accumulation in Differentiating Stem Cells

R. Markus, I. Ahmed, M. Symonds, 2019, Biomimetics.

Role of geometrical cues in bone marrow-derived mesenchymal stem cell survival, growth and osteogenic differentiation

D. Grant, I. Ahmed, V. Sottile, 2018, Journal of biomaterials applications.

Initial mechanical properties of phosphate-glass fibre-reinforced rods for use as resorbable intramedullary nails

Chris D. Rudd, L. T. Harper, Ifty Ahmed, 2012, Journal of Materials Science.

One‐step fabrication of superhydrophobic P(VDF‐co‐HFP) nanofibre membranes using electrospinning technique

I. Ahmed, X. Hou, Mahmut Taş, 2020 .

Electrospun Nanofibre Membrane Based Transparent Slippery

I. Ahmed, X. Hou, Mahmut Taş, 2019 .

Electric Field-Assisted Orientation of Short Phosphate Glass Fibers on Stainless Steel for Biomedical Applications.

A. Boccaccini, Haiou Yang, T. Lu, 2018, ACS applied materials & interfaces.

One-Step Fabrication of Superhydrophobic P(VDF-co-HFP) Nanofibre Membranes Using 1 Electrospinning Technique

I. Ahmed, X. Hou, Mahmut Taş, 2020 .

Collagen release kinetics of surface functionalized 45S5 Bioglass-based porous scaffolds.

A. Boccaccini, K. Rezwan, J. Knowles, 2008, Journal of biomedical materials research. Part A.

IN VIVO TESTING OF A PHOSPHATE GLASS FIBRE / PLA COMPOSITE USING A RABBIT TIBIA MODEL

C. Rudd, R. Pearson, A. Parsons, 2022 .

Magnesium Coated Bioresorbable Phosphate Glass Fibres: Investigation of the Interface between Fibre and Polyester Matrices

C. Rudd, Xiaoling Liu, D. Grant, 2013, BioMed research international.

Antibacterial effect of titanium dioxide-doped phosphate glass microspheres filled total-etch dental adhesive on S. mutans biofilm

J. Knowles, S. Valappil, I. Ahmed, 2021, International Journal of Adhesion and Adhesives.

Characterization of the anomaly in immediate aqueous interactions of sodium borate glasses by dynamic vapour sorption with in-situ Raman

S. Nazhat, K. Waters, I. Ahmed, 2023, Ceramics International.

Rapid conversion of highly porous borate glass microspheres into hydroxyapatite.

I. Ahmed, V. Sottile, M. Islam, 2021, Biomaterials science.

In vitro cellular testing of strontium/calcium substituted phosphate glass discs and microspheres shows potential for bone regeneration

B. Scammell, A. Kennedy, D. Grant, 2019, Journal of tissue engineering and regenerative medicine.

Mechanical, degradation and cytocompatibility properties of magnesium coated phosphate glass fibre reinforced polycaprolactone composites

C. Rudd, Xiaoling Liu, D. Grant, 2014, Journal of biomaterials applications.

reinforced polycaprolactone composites Mechanical , degradation and cytocompatibility properties of magnesium coated phosphate glass fibre

C. Rudd, Xiaoling Liu, D. Grant, 2014 .

BIOMECHANICAL PROPERTIES OF RESORBABLE COMPOSITE BONE FRACTURE REPAIR PLATES

C. Rudd, B. Scammell, A. Parsons, 2013 .

Structural Characteristics of Antibacterial Bioresorbable Phosphate Glass

Jonathan C. Knowles, Ifty Ahmed, J. Knowles, 2008 .

Structural and physico-chemical analysis of calcium/strontium substituted, near-invert phosphate based glasses for biomedical applications.

A. Kennedy, I. Ahmed, I. Ahmed, 2017, Acta biomaterialia.

Porous calcium phosphate glass microspheres for orthobiologic applications.

B. Scammell, A. Kennedy, D. Grant, 2018, Acta biomaterialia.

Recent Progress in Materials The Use of Biomaterials in Internal Radiation Therapy

R. Layfield, I. Ahmed, A. Arafat, 2020 .