W. Blömer

发表

A new universal, standardized implant database for product identification: a unique tool for arthroplasty registries

J. Hassenpflug, A. Steinbrück, C. Schröder, 2015, Archives of Orthopaedic and Trauma Surgery.

Biotribology of alternative bearing materials for unicompartmental knee arthroplasty.

C. Schröder, V. Jansson, A. Maas, 2010, Acta biomaterialia.

Biotribological evaluation of artificial disc arthroplasty devices: influence of loading and kinematic patterns during in vitro wear simulation

W. Blömer, J. Yue, Rolando García, 2008, European Spine Journal.

The effect of design parameters of interspinous implants on kinematics and load bearing: an in vitro study

A. Rohlmann, M. Pfeiffer, W. Blömer, 2014, European Spine Journal.

Alternative bearing materials for intervertebral disc arthroplasty.

V. Jansson, W. Blömer, H. Meisel, 2010, Biomaterials.

[Fixateur externe and minimal osteosynthesis: effect of various mounting technics on the stability of total osteosynthesis].

W. Blömer, A. Steiner, D. Hofmann, 1983, Unfallchirurgie.

Ein neues Meßverfahren zur Stabilitätsbeurteilung von Fixateur-externe-Systemen — Demonstriert am Beispiel des Fixateur-externe nach Stuhler-Heise - A new test procedure to examine the stability of external fixation clamps – Demonstrated with the Stuhler-Heise external Fixation System

W. Blömer, M. Ungethüm, 1981 .

The influence of contact conditions and micromotions on the fretting behavior of modular titanium alloy taper connections.

M. Morlock, W. Blömer, C. Schilling, 2013, Medical engineering & physics.

Biotribology of a vitamin E-stabilized polyethylene for hip arthroplasty - Influence of artificial ageing and third-body particles on wear.

W. Blömer, S. Utzschneider, M. Jäger, 2014, Acta biomaterialia.

Knee wear simulation under conditions of highly demanding daily activities--influence on an unicompartmental fixed bearing knee design.

V. Jansson, W. Blömer, S. Utzschneider, 2013, Medical engineering & physics.

The effect of design parameters of dynamic pedicle screw systems on kinematics and load bearing: an in vitro study

A. Rohlmann, G. Duda, W. Blömer, 2011, European Spine Journal.

Definition and evaluation of testing scenarios for knee wear simulation under conditions of highly demanding daily activities.

Christian Kaddick, Bernhard Fritz, Sandra Utzschneider, 2013, Medical engineering & physics.

Evaluation of impingement behaviour in lumbar spinal disc arthroplasty

C. Kaddick, W. Blömer, J. Yue, 2015, European Spine Journal.

Biotribology of Alternativ Bearing Materials for Knee Arthroplasty

C. Schröder, V. Jansson, W. Blömer, 2009 .

BIOTRIBOLOGY IN TOTAL KNEE ARTHROPLASTY – IN VITRO WEAR GENERATION, KNEE KINEMATICS AND PARTICLE COMPOSITION FOR FIXED AND MOBILE BEARING DESIGNS

S. D. Stulberg, C. Kaddick, Thomas M. Grupp, 2008 .

Ceramic-ceramic coupling in total hip arthroplasty

W. Blömer, W. Blömer, 1999 .

Biomechanical Aspects of Modular Inlay Fixation

W. Blömer, 1997 .

CONGRUENCY IN THE TIBIO FEMORAL ARTICULATION OF FIXED BEARING KNEE PROSTHESES – INFLUENCE ON DELAMINATION RISK, ABRASIVE WEAR GENERATION AND KINEMATICS

C. Kaddick, S. Stulberg, A. Maas, 2009 .

[Technology of cementless hip endoprosthetics].

W. Blömer, M. Ungethüm, 1987, Der Orthopade.

Ultrasound-based registration of the pelvic coordinate system in the lateral position using symmetry for total hip replacement

Klaus Radermacher, Lorenz Fieten, Stefan Heger, 2012, Biomedizinische Technik. Biomedical engineering.

[A new test procedure to examine the stability of external fixation clamps--demonstrated with the Stuhler-Heise external fixation system (author's transl)].

M Ungethüm, W Blömer, W. Blömer, 1981, Biomedizinische Technik. Biomedical engineering.

Fixed Bearing Knee Congruency – Influence on Contact Mechanics, Abrasive Wear and Kinematics

C. Kaddick, A. Maas, W. Blömer, 2009 .