S. Jaecques

发表

Early periprosthetic bone remodelling around cemented and uncemented custom-made femoral components and their uncemented acetabular cups

I. Jonkers, J. Nijs, M. Mulier, 2007, Archives of Orthopaedic and Trauma Surgery.

Relation between subject-specific hip joint loading, stress distribution in the proximal femur and bone mineral density changes after total hip replacement.

I. Jonkers, G. van der Perre, N. Sauwen, 2008, Journal of biomechanics.

Influence of implant design on the biomechanical environment of immediately placed implants: computed tomography-based nonlinear three-dimensional finite element analysis.

J. Vander Sloten, P. Coelho, S. Jaecques, 2011, The International journal of oral & maxillofacial implants.

A novel skeleton-based finite element mesh for fast assessment of trabecular bone competence

S. Boonen, J. D’hooge, W. Lauriks, 2008 .

Microstructural simulation of ultrasonic wave propagation through vertebral bone samples

S. Boonen, J. D’hooge, W. Lauriks, 2008, 2008 IEEE Ultrasonics Symposium.

Biomechanical evaluation of platform switching: different mismatch sizes, connection types, and implant protocols.

Ravel M Sousa, J. Vander Sloten, M. Casati, 2014, Journal of periodontology.

Biomechanical evaluation of platform switching in different implant protocols: computed tomography-based three-dimensional finite element analysis.

J. Vander Sloten, J. Duyck, S. Jaecques, 2010, The International journal of oral & maxillofacial implants.

Influence of Connection Types and Implant Number on the Biomechanical Behavior of Mandibular Full-Arch Rehabilitation.

Ravel M Sousa, J. Sloten, S. Jaecques, 2016, The International journal of oral & maxillofacial implants.

Influence of implant connection type on the biomechanical environment of immediately placed implants - CT-based nonlinear, three-dimensional finite element analysis.

J. Sloten, J. Duyck, S. Jaecques, 2009, Clinical implant dentistry and related research.

Individualised, micro CT-based finite element modelling as a tool for biomechanical analysis related to tissue engineering of bone.

I Naert, H Van Oosterwyck, M. Wevers, 2004, Biomaterials.

Bone Remodeling Around Implants with External Hexagon and Morse‐Taper Connections: A Randomized, Controlled, Split‐Mouth, Clinical Trial

Ravel M Sousa, W. Teughels, M. Quirynen, 2017, Clinical implant dentistry and related research.

Constant strain rate and peri-implant bone modeling: an in vivo longitudinal micro-CT analysis.

M. Wevers, J. Sloten, I. Naert, 2013, Clinical implant dentistry and related research.

The effect of strain rate amplitude on peri-implant bone (re)modelling: A guinea pig experimental study

M. Wevers, I. Naert, J. Vander Sloten, 2005 .

The guinea pig as an animal model for the study of immediately loaded implants: a feasibility study

J. Jansen, R. Puers, J. Sloten, 2001 .

Improving fixation of immediately loaded percutaneous implants by controlled mechanical stimulation: a pilot in vivo study on guinea pigs

M. Wevers, J. Jansen, J. Sloten, 2002 .

Immediate functional loading of single-tooth TiO2 grit-blasted implant restoration. A controlled prospective study in a porcine model. Part II: Histology and histomorphometry.

A. Goodship, J. Jansen, A. Petrie, 2007, Clinical implant dentistry and related research.

Immediate functional loading of single-tooth TIO2 grit-blasted implant restorations: a controlled prospective study in a porcine model. Part I: Clinical outcome.

A. Goodship, A. Petrie, G. Blunn, 2007, Clinical implant dentistry and related research.

Intra-operative monitoring of orthopaedic implant stability by vibration analysis

J. Sloten, Steven Leuridan, L. Pastrav, 2012 .

Assessment of the primary rotational stability of uncemented hip stems using an analytical model: Comparison with finite element analyses

G. van der Perre, L. Labey, N. Sauwen, 2008, Journal of orthopaedic surgery and research.

Prediction of the stability of cementless custom-made hip prostheses: geometrical considerations

Michiel Mulier, Georges Van der Perre, Luc Labey, 2006 .

Detection of the Insertion End Point of Cementless Hip Prostheses using the Comparison between Successive Frequency Response Functions

G. van der Perre, L. Pastrav, M. Mulier, 2008 .

Determination of total hip replacement stem insertion endpoint and stability assessment by vibration analysis: first experiences with per-operative measurements

L. Pastrav, M. Mulier, S. Jaecques, 2006 .

Telehealth on heart failure: results of the Recap project

S. Huffel, C. Varon, S. Jaecques, 2015, Journal of telemedicine and telecare.

Short fibre-reinforced composite for extensive direct restorations: a laboratory and computational assessment

J. Sloten, P. Noritomi, B. Van Meerbeek, 2015, Clinical Oral Investigations.

Micro-CT based quantitative evaluation of caries excavation.

Bart Van Meerbeek, B. Van Meerbeek, S. Jaecques, 2010, Dental materials : official publication of the Academy of Dental Materials.

3D-microleakage assessment of adhesive interfaces: exploratory findings by μCT.

Bart Van Meerbeek, Marcio Vivan Cardoso, B. Van Meerbeek, 2014, Dental materials : official publication of the Academy of Dental Materials.

Are one-step adhesives easier to use and better performing? Multifactorial assessment of contemporary one-step self-etching adhesives.

P. Lambrechts, A. Mine, K. V. Van Landuyt, 2009, The journal of adhesive dentistry.

In vivo evaluation of a vibration analysis technique for the per-operative monitoring of the fixation of hip prostheses

Ilse Jonkers, Georges Van der Perre, Michiel Mulier, 2009, Journal of orthopaedic surgery and research.

Analysis of the fixation quality of cementless hip prostheses using a vibrational technique

Georges Van der Perre, Leonard Pastrav, L. Pastrav, 2004 .

Resonance frequency analysis of implants in the guinea pig model: influence of boundary conditions and orientation of the transducer.

G Van der Perre, I Naert, V Pattijn, 2007, Medical engineering & physics.

Positive effect of early loading on implant stability in the bi-cortical guinea-pig model.

Ignace Naert, Jos Vander Sloten, Katleen Vandamme, 2005, Clinical oral implants research.

Effect of telehealth on self-care behavior of heart failure patients

Sabine Van Huffel, Carolina Varon, Stuart Thomson, 2014, Computing in Cardiology 2014.

Influence of notch geometry and interface on stress concentration and distribution in micro-tensile bond strength specimens.

H. Van Oosterwyck, P. Lambrechts, J. Sloten, 2008, Journal of dentistry.

Effect of controlled early implant loading on bone healing and bone mass in guinea pigs, as assessed by micro-CT and histology.

Reinhilde Jacobs, Jos Vander Sloten, Martine Wevers, 2006, European journal of oral sciences.

Geometric Analysis of the Proximal Medullary Cavity of the Femur in the German Shepherd Dog

M. Mulier, S. Jaecques, J. Helsen, 1997, Veterinary and Comparative Orthopaedics and Traumatology.

Effect of constant strain rate, composed of varying amplitude and frequency, of early loading on peri-implant bone (re)modelling.

J Vander Sloten, I. Naert, J. Vander Sloten, 2007, Journal of clinical periodontology.

A fast convolution-based methodology to simulate 2-Dd/3-D cardiac ultrasound images

J. D'hooge, P. Claus, W. Lauriks, 2009, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

Numerical simulation of the insertion process of an uncemented hip prosthesis in order to evaluate the influence of residual stress and contact distribution on the stem initial stability

G. van der Perre, L. Pastrav, M. Mulier, 2014, Computer methods in biomechanics and biomedical engineering.

A finite element analysis of the vibrational behaviour of the intra-operatively manufactured prosthesis-femur system.

G Van der Perre, G. van der Perre, L. Pastrav, 2009, Medical engineering & physics.

Fast and accurate specimen-specific simulation of trabecular bone elastic modulus using novel beam-shell finite element models.

Jan D'hooge, Walter Lauriks, G Harry van Lenthe, 2011, Journal of biomechanics.

Technique sensitivity of water-free one-step adhesives.

P. Lambrechts, M. Peumans, B. Van Meerbeek, 2008, Dental materials : official publication of the Academy of Dental Materials.

Analysis of the Fixation Quality of Total Hip Replacements Using a Vibrational Technique

S. Jaecques, G. V. D. Perre, Cezara Pastrav, 2004 .

A Validated Skeleton-based Finite Element Mesh for Parametric Analysis of Trabecular Bone Competence

Jan D'hooge, Walter Lauriks, G. Van der Perre, 2009 .

Trabecular bone strains around a dental implant and associated micromotions--a micro-CT-based three-dimensional finite element study.

Georges Limbert, Stig Hansson, J. Middleton, 2010, Journal of biomechanics.

Detection of the insertion end point of cementless hip prostheses using the comparison between successive frequency response functions.

M Mulier, G. van der Perre, L. Pastrav, 2008, Journal of applied biomaterials & biomechanics : JABB.

Resorption cavity depth explains strength enhancing effect of antiresorptive agents

S. Boonen, J. D’hooge, W. Lauriks, 2009 .

The correlation between the SOS in trabecular bone and stiffness and density studied by finite-element analysis

G. Van der Perre, J. D'hooge, W. Lauriks, 2008, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

In vivo micro-CT-based FE models of guinea pigs with titanium implants: an STL-based approach

Jos Vander Sloten, Ignace Naert, Carl Van Lierde, 2004, CARS.

Feasibility of monitoring bone remodelling around loaded percutaneous tibial implants in guinea pigs by in vivo microfocus computed tomography

Jos Vander Sloten, Georges Van der Perre, Ignace Naert, 2001, CARS.

Measurement of implant stability and osseointegration: non-linearities and resonance frequencies

R. Puers, F. Burny, S. Jaecques, 2000 .

Micro-CT based finite element modelling as an in vivo follow-up tool for adaptive bone response around implants in guinea pig tibiae

Jos Vander Sloten, Martine Wevers, Ignace Naert, 2003 .