J. Gilbert

发表

A theoretical and experimental analysis of polymerization shrinkage of bone cement: A potential major source of porosity.

R. Wixson, E. Lautenschlager, J. Gilbert, 2000, Journal of biomedical materials research.

Effect of initiation chemistry on the fracture toughness, fatigue strength, and residual monomer content of a novel high-viscosity, two-solution acrylic bone cement.

R. Wixson, E. Lautenschlager, J. Gilbert, 2002, Journal of biomedical materials research.

Controlling Pseudomonas aeruginosa persister cells by weak electrochemical currents and synergistic effects with tobramycin.

Tagbo H. R. Niepa, D. Ren, J. Gilbert, 2012, Biomaterials.

Synergy between tobramycin and trivalent chromium ion in electrochemical control of Pseudomonas aeruginosa.

Tagbo H. R. Niepa, D. Ren, J. Gilbert, 2016, Acta biomaterialia.

Eradication of Pseudomonas aeruginosa cells by cathodic electrochemical currents delivered with graphite electrodes.

Tagbo H. R. Niepa, D. Ren, J. Gilbert, 2017, Acta biomaterialia.

In vivo corrosion of modular hip prosthesis components in mixed and similar metal combinations. The effect of crevice, stress, motion, and alloy coupling.

J L Gilbert, J. Jacobs, J. Gilbert, 1993, Journal of biomedical materials research.

Bond characteristics of porcelain fused to milled titanium.

E. Lautenschlager, J. Gilbert, D. Covey, 1994, Dental materials : official publication of the Academy of Dental Materials.

Long-term fretting corrosion performance of modular head-neck junctions with self-reinforced composite gaskets from PEEK and UHMWPE.

J. Gilbert, E. Ouellette, Dongkai Zhu, 2022, Journal of the mechanical behavior of biomedical materials.

In Vitro Fretting Crevice Corrosion Damage of CoCrMo Alloys in Phosphate Buffered Saline: Debris Generation, Chemistry and Distribution.

J. Gilbert, Dongkai Zhu, Yangping Liu, 2020, Acta biomaterialia.

Fretting Initiated Crevice Corrosion of 316LVM Stainless Steel in Physiological Phosphate Buffered Saline: Potential and Cycles to Initiation.

J. Gilbert, Dongkai Zhu, Yangping Liu, 2019, Acta biomaterialia.

Method of Characterizing Fretting and Corrosion at the Various Taper Connections of Retrieved Modular Components from Metal-on-Metal Total Hip Arthroplasty

S. Kurtz, C. Rimnac, J. Parvizi, 2013 .

Corrosion Testing of Modular Hip Implants

J. Jacobs, J. Gilbert, C. Buckley, 1997 .

Cytotoxic effect of galvanically coupled magnesium-titanium particles.

J. Gilbert, Jua Kim, 2016, Acta biomaterialia.

Ceramic Heads Decrease Metal Release Caused by Head-taper Fretting and Corrosion

S. Kurtz, D. Macdonald, J. Gilbert, 2016, Clinical orthopaedics and related research.

Self-reinforced composite poly(methyl methacrylate): static and fatigue properties.

E. Lautenschlager, J. Gilbert, D. S. Ney, 1995, Biomaterials.

Fretting crevice corrosion of 316 L stainless steel in physiological phosphate buffered saline: Load, potential and alloy counterface effects

J. Gilbert, S. Mali, Dongkai Zhu, 2021 .

The effect of processing temperature and time on the structure and fracture characteristics of self-reinforced composite poly(methyl methacrylate)

E. Lautenschlager, J. Gilbert, D. D. Wright, 1999, Journal of materials science. Materials in medicine.

Voltage-controlled cellular viability of preosteoblasts on polarized cpTi with varying surface oxide thickness.

G. Langford, J. Gilbert, T. Wöllert, 2013, Bioelectrochemistry.

Bending and fracture toughness of woven self-reinforced composite poly (methyl methacrylate).

E. Lautenschlager, J. Gilbert, D. D. Wright, 1996, Northwestern dental research.

Self-reinforced composite polyethylene (SRC-PE): a novel material for orthopedic applications

J. Gilbert, S. Megremis, S. Duray, 1998 .

Hot compaction of poly(methyl methacrylate) composites based on fiber shrinkage results

E. Lautenschlager, J. Gilbert, D. D. Wright-Charlesworth, 2005, Journal of materials science. Materials in medicine.

Focal Osteolysis at the Junctions of a Modular Stainless-Steel Femoral Intramedullary Nail

K., J. Buckwalter, J. L. Marsh, 2001, Journal of Bone and Joint Surgery. American volume.

Migration of corrosion products from modular hip prostheses. Particle microanalysis and histopathological findings.

J. Galante, J. Jacobs, R. Urban, 1994, The Journal of bone and joint surgery. American volume.

A fluorescent approach for detecting and measuring reduction reaction byproducts near cathodically-biased metallic surfaces: Reactive oxygen species production and quantification.

Michael J Wiegand, J. Gilbert, Thomas Z. Benton, 2019, Bioelectrochemistry.

The effect of cell density, proximity, and time on the cytotoxicity of magnesium and galvanically coupled magnesium-titanium particles in vitro.

J. Gilbert, Jua Kim, 2018, Journal of biomedical materials research. Part A.

Electrochemical control of cell death by reduction-induced intrinsic apoptosis and oxidation-induced necrosis on CoCrMo alloy in vitro.

G. Langford, J. Gilbert, M. Haeri, 2012, Biomaterials.

The improvement of adhesion of polymer on titanium surface after treatment with TEA-CO2 laser irradiation

W. Müller, J. Gilbert, J. Meyer, 1994 .

The effect of simulated inflammatory conditions and Fenton chemistry on the electrochemistry of CoCrMo alloy.

J. Gilbert, Yangping Liu, 2018, Journal of biomedical materials research. Part B, Applied biomaterials.

Oxidative Stress, Inflammation, and the Corrosion of Metallic Biomaterials: Corrosion Causes Biology and Biology Causes Corrosion

J. Gilbert, G. Kubacki, G. W. Kubacki, 2016 .

Constrained shrinkage of highly oriented poly(methyl methacrylate) fibers

E. Lautenschlager, J. Gilbert, D. D. Wright, 2004 .

Transient electric fields induced by mechanically assisted corrosion of Ti-6Al-4V.

J. Gilbert, S. Goldberg, 2001, Journal of biomedical materials research.

Study of cellular dynamics on polarized CoCrMo alloy using time-lapse live-cell imaging.

J. Gilbert, M. Haeri, 2013, Acta biomaterialia.

Effects of moisture content, temperature and pollutant mixture on atmospheric corrosion of copper and silver and implications for the environmental design of data centers (RP-1755)

J. Zhang, B. Guo, J. Gilbert, 2020 .

Incorporation of Ca and P on anodized titanium surface: Effect of high current density.

P. Soares, R. Torres, C. Laurindo, 2014, Materials science & engineering. C, Materials for biological applications.

Primary hip replacement stem taper fracture due to corrosion in 3 patients

M. Morlock, C. Verheyen, H. Ettema, 2016, Acta orthopaedica.

Fracture of an Acetabular Component Inserted without Cement: A Case Report

D. Berry, J. Jacobs, R. Trousdale, 1997, The Journal of bone and joint surgery. American volume.

Interfacial properties of self-reinforced composite poly(methyl methacrylate).

E. Lautenschlager, J. Gilbert, D. D. Wright, 1998, Journal of biomedical materials research.

Bending and fracture toughness of woven self-reinforced composite poly(methyl methacrylate).

E. Lautenschlager, J. Gilbert, D. D. Wright, 1997, Journal of biomedical materials research.

Bone Anabolic Responses to Mechanical Load In Vitro Involve COX-2 and Constitutive NOS

P. Stern, J. Gilbert, K. Igarashi, 2004, Connective tissue research.

Electrochemical potential zone of viability on CoCrMo surfaces is affected by cell type: Macrophages under cathodic bias are more resistant to killing.

Michael J Wiegand, J. Gilbert, G. Kubacki, 2018, Journal of biomedical materials research. Part A.

Voltage and wear debris from Ti-6Al-4V interact to affect cell viability during in-vitro fretting corrosion.

J. Gilbert, G. Kubacki, Tiantian Hui, 2018, Journal of biomedical materials research. Part A.

Laser acoustic emission thermal technique (LAETT): a technique for generating acoustic emission in dental composites.

E. Lautenschlager, E. Greener, J. Gilbert, 1996, Dental materials : official publication of the Academy of Dental Materials.

Micromechanical Measurement of Adhesion of Dehydrating Silicone Hydrogel Contact Lenses to Corneal Tissue.

J. Gilbert, Dongkai Zhu, Yangping Liu, 2021, Acta biomaterialia.

A metallic biomaterial tribocorrosion model linking fretting mechanics, currents, and potentials: Model development and experimental comparison.

J. Gilbert, Dongkai Zhu, 2020, Journal of biomedical materials research. Part B, Applied biomaterials.

The effect of simulated inflammatory conditions and pH on fretting corrosion of CoCrMo alloy surfaces

J. Gilbert, Yangping Liu, 2017 .

Corrosion in the Human Body: Metallic Implants in the Complex Body Environment

J. Gilbert, 2017 .

Area-dependent impedance-based voltage shifts during tribocorrosion of Ti-6Al-4V biomaterials: theory and experiment

J. Gilbert, S. Mali, Yangping Liu, 2016 .

Potential and frequency effects on fretting corrosion of Ti6Al4V and CoCrMo surfaces.

J. Gilbert, V. Swaminathan, Viswanathan Swaminathan, 2013, Journal of biomedical materials research. Part A.

Intraoperative Neuromonitoring: Can the Results of Direct Stimulation of Titanium-Alloy Pedicle Screws in the Thoracic Spine Be Trusted?

B. Calancie, J. Gilbert, R. Moquin, 2012, Journal of clinical neurophysiology : official publication of the American Electroencephalographic Society.

Fretting corrosion of CoCrMo and Ti6Al4V interfaces.

J. Gilbert, V. Swaminathan, Viswanathan Swaminathan, 2012, Biomaterials.

Step-polarization impedance spectroscopy of implant alloys in physiologic solutions.

J. Gilbert, 1998, Journal of biomedical materials research.

A study of biologically active peptide sequences (P-15) on the surface of an ABM scaffold (PepGen P-15) using AFM and FTIR.

J. A. Schwarz, J. Gilbert, B. Atkinson, 2005, Journal of biomedical materials research. Part A.

Corrosion Damage and Wear Mechanisms in Long-Term Retrieved CoCr Femoral Components for Total Knee Arthroplasty.

S. Kurtz, C. Rimnac, A. Malkani, 2016, The Journal of arthroplasty.

Does Taper Size Have an Effect on Taper Damage in Retrieved Metal-on-Polyethylene Total Hip Devices?

S. Kurtz, C. Rimnac, J. Gilbert, 2016, The Journal of arthroplasty.

Properties and Corrosion Performance of Self-reinforced Composite PEEK for Proposed Use as a Modular Taper Gasket

J. Gilbert, E. Ouellette, 2016, Clinical orthopaedics and related research.

Is increased modularity associated with increased fretting and corrosion damage in metal-on-metal total hip arthroplasty devices?: a retrieval study.

S. Kurtz, C. Rimnac, J. Gilbert, 2013, The Journal of arthroplasty.

Do Ceramic Femoral Heads Reduce Taper Fretting Corrosion in Hip Arthroplasty? A Retrieval Study

S. Kurtz, Gwo-Chin Lee, C. Rimnac, 2013, Clinical orthopaedics and related research.

In vivo oxide-induced stress corrosion cracking of Ti-6Al-4V in a neck-stem modular taper: Emergent behavior in a new mechanism of in vivo corrosion.

J. Jacobs, R. Urban, J. Gilbert, 2012, Journal of biomedical materials research. Part B, Applied biomaterials.

Direct in vivo inflammatory cell-induced corrosion of CoCrMo alloy orthopedic implant surfaces.

S. Kurtz, J. Gilbert, Yangping Liu, 2015, Journal of biomedical materials research. Part A.

Intergranular corrosion-fatigue failure of cobalt-alloy femoral stems. A failure analysis of two implants.

J. Jacobs, J. Gilbert, C. Buckley, 1994, The Journal of bone and joint surgery. American volume.

Composition and morphology of wear debris in failed uncemented total hip replacement.

J O Galante, J L Gilbert, J Black, 1994, The Journal of bone and joint surgery. British volume.

Corrosion of metal orthopaedic implants.

Joshua J. Jacobs, Jeremy L. Gilbert, Robert M. Urban, 1998, The Journal of bone and joint surgery. American volume.

In vivo severe corrosion and hydrogen embrittlement of retrieved modular body titanium alloy hip-implants.

J. Jacobs, R. Urban, J. Gilbert, 2009, Journal of biomedical materials research. Part B, Applied biomaterials.

In situ imaging and impedance measurements of titanium surfaces using AFM and SPIS.

J. Bearinger, C. Orme, J. Gilbert, 2003, Biomaterials.

A novel high-viscosity, two-solution acrylic bone cement: effect of chemical composition on properties.

R. Wixson, E. Lautenschlager, J. Gilbert, 1999, Journal of biomedical materials research.

Interfacial compliance, energy dissipation, frequency effects, and long-term fretting corrosion performance of Ti-6Al-4V/CoCrMo interfaces.

J. Gilbert, Stephanie M. Smith, 2021, Journal of biomedical materials research. Part A.

In vitro corrosion testing of modular hip tapers.

J. Gilbert, J. R. Goldberg, 2003, Journal of biomedical materials research. Part B, Applied biomaterials.

A Multicenter Retrieval Study of the Taper Interfaces of Modular Hip Prostheses

Sue Leurgans, Joshua J Jacobs, Thomas W Bauer, 2002, Clinical orthopaedics and related research.

Sensitizing Pseudomonas aeruginosa to antibiotics by electrochemical disruption of membrane functions.

Tagbo H. R. Niepa, Marcus B. Jones, D. Ren, 2016, Biomaterials.

Sensing Localized Surface Corrosion Damage of CoCrMo Alloys and Modular Tapers of Total Hip Retrievals Using Nearfield Electrochemical Impedance Spectroscopy.

Michael J Wiegand, J. Gilbert, Aarti A Shenoy, 2020, ACS biomaterials science & engineering.

The electrochemical and mechanical behavior of passivated and TiN/AlN-coated CoCrMo and Ti6Al4V alloys.

J. Gilbert, J. R. Goldberg, 2004, Biomaterials.

Characterization of solid products of corrosion generated by modular-head femoral stems of different designs and materials

J. Galante, C. Bragdon, J. Jacobs, 1997 .

The effect of scanning electrochemical potential on the short-term impedance of commercially pure titanium in simulated biological conditions.

J. Gilbert, M. Ehrensberger, 2010, Journal of biomedical materials research. Part A.

Titanium is not "the most biocompatible metal" under cathodic potential: The relationship between voltage and MC3T3 preosteoblast behavior on electrically polarized cpTi surfaces.

J. Gilbert, M. Ehrensberger, S. Sivan, 2009, Journal of biomedical materials research. Part A.

In vitro cytotoxicity of galvanically coupled magnesium-titanium particles on human osteosarcoma SAOS2 cells: A potential cancer therapy.

J. Gilbert, Jua Kim, 2019, Journal of biomedical materials research. Part B, Applied biomaterials.

Predicting Corrosion Damage in the Human Body Using Artificial Intelligence: In Vitro Progress and Future Applications.

J. Gilbert, W. Nelson, Rahul Rai, 2023, The Orthopedic clinics of North America.

Electrocautery-induced molten metal particle generation from total joint replacements: Morphology and chemistry.

Michael J Wiegand, J. Gilbert, G. Kubacki, 2021, Journal of biomedical materials research. Part B, Applied biomaterials.

Electrosurgery Induced Damage to Ti-6Al-4V and CoCrMo Alloy Surfaces in Orthopedic Implants In Vivo and In Vitro.

J. Gilbert, G. Kubacki, S. Sivan, 2017, The Journal of arthroplasty.

The voltage-dependent electrochemical impedance spectroscopy of CoCrMo medical alloy using time-domain techniques: Generalized Cauchy-Lorentz, and KWW-Randles functions describing non-ideal interfacial behaviour

J. Gilbert, M. Haeri, S. Goldberg, 2011 .

A time-based potential step analysis of electrochemical impedance incorporating a constant phase element: a study of commercially pure titanium in phosphate buffered saline.

J. Gilbert, M. Ehrensberger, Jeremy L Gilbert, 2009, Journal of biomedical materials research. Part A.

Effect of hydrogen peroxide on titanium surfaces: in situ imaging and step-polarization impedance spectroscopy of commercially pure titanium and titanium, 6-aluminum, 4-vanadium.

J. Bearinger, C. Orme, J. Gilbert, 2003, Journal of biomedical materials research. Part A.

Pseudoplasticity and setting properties of two-solution bone cement containing poly(methyl methacrylate) microspheres and nanospheres for kyphoplasty and vertebroplasty.

J. Gilbert, J. Hasenwinkel, D. Rodrigues, 2009, Journal of biomedical materials research. Part B, Applied biomaterials.

Bonding characteristics of low-fusing porcelain bonded to pure titanium and palladium-copper alloy.

E. Lautenschlager, J. Gilbert, J. Chai, 1995, The Journal of prosthetic dentistry.

The effect of cathodic electrochemical potential of Ti-6Al-4V on cell viability: voltage threshold and time dependence.

J. Gilbert, S. Sivan, S. Kaul, 2013, Journal of biomedical materials research. Part B, Applied biomaterials.

Rate effects on the microindentation-based mechanical properties of oxidized, crosslinked, and highly crystalline ultrahigh-molecular-weight polyethylene.

J. Gilbert, Imad K Merkhan, 2004, Journal of biomedical materials research. Part A.

Surface micromechanics of ultrahigh molecular weight polyethylene: Microindentation testing, crosslinking, and material behavior.

J. Gilbert, Aaron S. Butterfield, Jeffrey Cumber, 2002, Journal of biomedical materials research.

Electrochemical investigation of chromium oxide-coated Ti-6Al-4V and Co-Cr-Mo alloy substrates.

Zongtao Zhang, J. Gilbert, D. Lawrynowicz, 2011, Journal of biomedical materials research. Part B, Applied biomaterials.

Gentamicin release from two-solution and powder-liquid poly(methyl methacrylate)-based bone cements by using novel pH method.

J. Gilbert, J. Hasenwinkel, Imad K Merkhan, 2004, Journal of biomedical materials research. Part A.

The effect of tibial stem design on component micromotion in knee arthroplasty.

R. D. Wills, S. Stern, J. Gilbert, 1997, Clinical orthopaedics and related research.

Electrochemical response of CoCrMo to high-speed fracture of its metal oxide using an electrochemical scratch test method.

J. Gilbert, J. R. Goldberg, 1997, Journal of biomedical materials research.

The Mechanical and Electrochemical Processes Associated with Taper Fretting Crevice Corrosion: A Review

J. Jacobs, J. Gilbert, 1997 .

Titanium Oxide Film Fracture and Repassivation: The Effect of Potential, pH and Aeration

E. Lautenschlager, J. Gilbert, C. Buckley, 1996 .

Medical Implant Corrosion: Electrochemistry at Metallic Biomaterial Surfaces

J. Gilbert, S. Mali, 2012 .

Fretting crevice corrosion of stainless steel stem-CoCr femoral head connections: comparisons of materials, initial moisture, and offset length.

J. Gilbert, M. Mehta, Bryan Pinder, 2009, Journal of biomedical materials research. Part B, Applied biomaterials.

Bio-Tribocorrosion : Fundamentals and Advances in Orthopaedics

J. Jacobs, J. Geringer, J. Gilbert, 2014 .

Fretting corrosion of Si3N4 vs CoCrMo femoral heads on Ti‐6Al‐V trunnions

J. Gilbert, Dongkai Zhu, P. Khullar, 2020, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Fretting and Corrosion at Modular Junctions Can ceramics

C. Rimnac, J. Gilbert, 2015 .

Cathodic Activation and Inflammatory Species Are Critical to Simulating In Vivo Ti-6Al-4V Selective Dissolution.

J. Gilbert, P. Khullar, Michael A. Kurtz, 2022, Acta biomaterialia.

Technical Note: Is Corrosion a Threat to the Strength of the Taper Connection in Femoral Components of Total Hip Replacements?

S. Kurtz, C. Rimnac, W. Mihalko, 2017 .

On the nature and crystallographic orientation of subsurface cracks in high cycle fatigue of Ti-6Al-4V

H. Piehler, J. Gilbert, 1993 .

Local and distant products from modularity.

J. Galante, J. Jacobs, J. Black, 1995, Clinical orthopaedics and related research.

Two-solution bone cements with cross-linked micro and nano-particles for vertebral fracture applications: effects of zirconium dioxide content on the material and setting properties.

J. Gilbert, J. Hasenwinkel, D. Rodrigues, 2010, Journal of biomedical materials research. Part B, Applied biomaterials.

Modern Trunnions Are More Flexible: A Mechanical Analysis of THA Taper Designs

J. Jacobs, D. Porter, R. Urban, 2014, Clinical orthopaedics and related research.

Does Taper Angle Clearance Influence Fretting and Corrosion Damage at the Head-Stem Interface? A Matched Cohort Retrieval Study.

S. Kurtz, J. Day, J. Gilbert, 2013, Seminars in arthroplasty.

Medical Device Materials V

Jeremy L. Gilbert, J. Gilbert, 2009 .

Evaluation of a solvent-softened gutta-percha obturation technique in curved canals.

J. Gilbert, E. Osetek, P. Ashkenaz, 1995, Journal of endodontics.

Comparison of chemical analysis of residual monomer in a chemical-cured dental acrylic material to an FTIR method.

E. Lautenschlager, J. Gilbert, S. Duray, 1997, Dental materials : official publication of the Academy of Dental Materials.

The effect of processing conditions on the properties of poly(methyl methacrylate) fibers.

E. Lautenschlager, J. Gilbert, D. D. Wright, 2002, Journal of biomedical materials research.

Differential Gene Expression to Investigate the Effects of Low-level Electrochemical Currents on Bacillus subtilis

Tagbo H. R. Niepa, Marcus B. Jones, D. Ren, 2011, AMB Express.

Analysis of Electrochemical Impedance Spectra Using Phase Angle Symmetry Across Log Frequency

J. Gilbert, P. Khullar, 2020 .

Direct observation of hydration of TiO2 on Ti using electrochemical AFM: freely corroding versus potentiostatically held

J. Bearinger, C. Orme, J. Gilbert, 2001 .

The effect of hypochlorous acid on the tribocorrosion of CoCrMo/Ti-6Al-4V bearing couples.

J. Gilbert, G. W. Kubacki, 2021, Journal of Biomedical Materials Research. Part A.

In vitro test methods for seating and fretting corrosion behavior of modular metal‐on‐metal acetabular tapers

J. Gilbert, Aarti A Shenoy, 2019, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Synthetic periprosthetic synovial fluid development for in vitro cell-tribocorrosion testing using the Taguchi array approach.

Michael J Wiegand, J. Gilbert, Jeremy J. Mercuri, 2020, Journal of biomedical materials research. Part A.

Fibrinogen adsorption onto 316L stainless steel under polarized conditions.

J. Gilbert, R. Gettens, 2008, Journal of biomedical materials research. Part A.

Corrosion Performance of Stainless Steels, Cobalt, and Titanium Alloys in Biomedical Applications

J. Gilbert, Zhijun Bai, 2006 .

Quantification of the kinetics and thermodynamics of protein adsorption using atomic force microscopy.

J. Gilbert, Zhijun Bai, R. Gettens, 2005, Journal of biomedical materials research. Part A.

Analysis of the shelf life of a two-solution bone cement.

J. Gilbert, J. Hasenwinkel, S. Warner, 2005, Biomaterials.

Additively manufactured Ti-29Nb-21Zr shows improved oxide polarization resistance versus Ti-6Al-4V in inflammatory simulating solution.

A. Mace, J. Gilbert, Michael A. Kurtz, 2023, Journal of biomedical materials research. Part A.

Retrieval Analysis of Metal-on-Metal Total Hip Prostheses: Characterizing Fretting and Corrosion at Modular Interfaces

S. Kurtz, C. Rimnac, J. Day, 2013 .

Corrosion in stainless-steel and nickel-titanium files.

E. Lautenschlager, J. Gilbert, A. Koerber, 1999, Journal of endodontics.

Corrosion of Modular Tapers in Total Joint Replacements: A Critical Assessment of Design, Materials, Surface Structure, Mechanics, Electrochemistry, and Biology

J. Gilbert, S. Mali, S. Sivan, 2015 .

Mechanically assisted taper corrosion in modular TKA.

S. Kurtz, Gwo-Chin Lee, C. Rimnac, 2014, The Journal of arthroplasty.

Production and characterization of melt-spun Poly(Ether Ether Ketone) fibers for biomedical applications

J. Gilbert, E. Ouellette, 2015 .

Retrieval Analysis of the Essure® Micro Insert Female Sterilization Implant: Methods for Metal Ion and Microscopic Analysis.

J. Gilbert, Charley M. Goodwin, Can Aslan, 2023, Acta Biomaterialia.

In Vitro Corrosion Assessment of the Essure® Medical Device in Saline, Simulated Inflammatory Solution and Neutral Buffered Formalin.

J. Gilbert, Can Aslan, 2022, Acta biomaterialia.

Effect of the support systems’ compliance on total hip modular taper seating stability

Reginald K Lee, J. Nevelos, A. Faizan, 2018, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Tissue response to in situ polymerization of a new two-solution bone cement: evaluation in a sheep model.

M. Allen, J. Gilbert, J. Hasenwinkel, 2006, Journal of biomedical materials research. Part B, Applied biomaterials.

Quantitative analysis of monomer vapor release from two-solution bone cement by using a novel FTIR technique.

J. Gilbert, J. Hasenwinkel, Imad K Merkhan, 2005, Journal of Biomedical Materials Research. Part B - Applied biomaterials.

Low cycle fretting and fretting corrosion properties of low carbon CoCrMo and additively manufactured CoCrMoW alloys for dental and orthopedic applications.

A. Mace, J. Gilbert, 2023, Journal of biomedical materials research. Part B, Applied biomaterials.

Single Asperity Sub-nano to Nanoscale Wear and Tribocorrosion of Wrought CoCrMo and Additively Manufactured CoCrMoW Alloys

A. Mace, J. Gilbert, Yangping Liu, 2022, Tribology International.

Micromechanics of shelf-aged and retrieved UHMWPE tibial inserts: indentation testing, oxidative profiling, and thickness effects.

J. Gilbert, J. Wernle, 2005, Journal of biomedical materials research. Part B, Applied biomaterials.

Corrosion properties of low carbon CoCrMo and additively manufactured CoCr alloys for dental applications.

A. Mace, J. Gilbert, P. Khullar, 2022, Dental materials : official publication of the Academy of Dental Materials.

Micro-asperity tribocorrosion of CoCrMo, Ti6Al4V, and 316 stainless steel in air and physiological solution: Small scale reciprocal sliding of a single diamond tip

A. Mace, J. Gilbert, 2022, Wear.

Sub-Nano to Nanometer Wear and Tribocorrosion of Titanium Oxide-Metal Surfaces by In Situ Atomic Force Microscopy.

J. Gilbert, Dongkai Zhu, Yangping Liu, 2021, Acta biomaterialia.

Effects of seating load magnitude and load orientation on seating mechanics in 5°40' mixed-alloy modular taper junctions.

J. Gilbert, D. Pierre, K. Tenhuisen, 2019, Journal of biomechanics.

Effects of Seating Load Magnitude on Incremental Cyclic Fretting Corrosion in 5°40' Mixed Alloy Modular Taper Junctions.

J. Gilbert, D. Pierre, K. Tenhuisen, 2018, The Journal of arthroplasty.

Nontribological corrosion modes dominate wrought CoCrMo acetabular taper corrosion: A retrieval study.

S. Kurtz, J. Gilbert, Aarti A Shenoy, 2021, Journal of biomedical materials research. Part B, Applied biomaterials.

Microscale and nanoscale surface strain mapping of single asperity wear in ultra high molecular weight polyethylene: Effects of materials, load, and asperity geometry.

J. Gilbert, J. Wernle, 2009, Journal of biomedical materials research. Part A.

Effect of simulated inflammatory conditions and potential on dissolution and surface oxide of CoCrMo alloy: In situ electrochemical atomic force microscopy study

J. Gilbert, Yangping Liu, 2017 .

The seating mechanics of head‐neck modular tapers in vitro: Load‐displacement measurements, moisture, and rate effects

J. Gilbert, E. Ouellette, Aarti A Shenoy, 2018, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Correlating Fretting Corrosion and Micromotions in Modular Tapers: Test Method Development and Assessment

J. Gilbert, S. Mali, 2015 .

Electrochemical Behavior of Metals in the Biological Milieu

J. Gilbert, 2011 .

Design, Material, and Seating Load Effects on In Vitro Fretting Corrosion Performance of Modular Head-Neck Tapers.

J. Gilbert, S. Mali, E. Ouellette, 2019, The Journal of arthroplasty.

Corrosion of Modular Titanium Alloy Stems in Cementless Hip Replacement

J. Jacobs, R. Urban, J. Gilbert, 2005 .

Scanning electrochemical microscopy of metallic biomaterials: reaction rate and ion release imaging modes.

S. M. Smith, E. Lautenschlager, J. Gilbert, 1993, Journal of biomedical materials research.

Mechanical-Electrochemical Interactions During In-Vitro Fretting Corrosion Tests of Modular Taper Connections

J. Gilbert, C. Buckley, 1993 .

The scanning potential microscope: An instrument to image micro-corrosion processes on metallic biomaterials surfaces.

S. M. Smith, J. Gilbert, 1991, Northwestern dental research.

A computer-based biomechanical analysis of the three-dimensional motion of cementless hip prostheses.

E P Lautenschlager, J L Gilbert, R S Bloomfeld, 1992, Journal of biomechanics.

Comparison of four techniques for monitoring the setting kinetics of gypsum.

E. Lautenschlager, J. Gilbert, P. Monaghan, 1998, The Journal of prosthetic dentistry.

Freeze-drying and scanning electron microscopy of setting dental gypsum.

E. Lautenschlager, J. Gilbert, P. Monaghan, 1995, Dental materials : official publication of the Academy of Dental Materials.

Effects of Gaseous Pollution and Thermal Conditions on the Corrosion Rates of Copper and Silver in Data Centre Environment: A Literature Review

Jensen S. Zhang, J. Gilbert, Rui Zhang, 2018 .

Quantification of fibrinogen adsorption onto 316L stainless steel.

J. Gilbert, R. Gettens, 2007, Journal of biomedical materials research. Part A.

In vitro Mechanical and Cellular Responses of Neonatal Mouse Bones to Loading Using a Novel Micromechanical-Testing Device

P. Stern, J. Gilbert, J. G. Kunnel, 2002, Calcified Tissue International.

Self-reinforced poly(ether ether ketone) and polyethylene composite gaskets for prevention of mechanically-assisted corrosion in modular taper junctions: Seating, micromotion and short-term fretting corrosion.

J. Gilbert, E. Ouellette, Stephanie M. Smith, 2021, Journal of the mechanical behavior of biomedical materials.

Compliant interfaces and fretting corrosion of modular taper junctions in total hip implants: The micromechanics of contact

J. Gilbert, Stephanie M. Smith, 2020 .

CORR Insights®: Are Damage Modes Related to Microstructure and Material Loss in Severely Damaged CoCrMo Femoral Heads?

J. Gilbert, 2021, Clinical orthopaedics and related research.

PMMA brush-containing two-solution bone cement: preparation, characterization, and influence of composition on cement properties

J. Gilbert, J. Hasenwinkel, D. Rodrigues, 2013, Journal of Materials Science: Materials in Medicine.

Effect of multipurpose care solutions upon physical dimensions of silicone hydrogel contact lenses.

J. Gilbert, J. Chinn, Dongkai Zhu, 2019, Journal of biomedical materials research. Part B, Applied biomaterials.

Influence of the annealing treatment on the tribocorrosion properties of Ca and P containing TiO2 produced by plasma electrolytic oxidation

P. Soares, R. Torres, C. Laurindo, 2016 .

The dangers in adopting a tissue-engineering-centric agenda: a president's perspective.

J. Gilbert, 2011, Journal of biomedical materials research. Part A.

Acrylics in Biomedical Engineering

Jeremy L. Gilbert, J. Gilbert, 2001 .

Deformation processing of PMMA into high-strength fibers

E. Lautenschlager, J. Gilbert, C. Buckley, 1992 .

Electrochemical investigation of chromium nanocarbide coated Ti–6Al–4V and Co–Cr–Mo alloy substrates

Zongtao Zhang, J. Gilbert, D. Lawrynowicz, 2012 .

Is Taper Fretting Corrosion a Threat to the Clinical Performance of Large-Diameter Hips with Highly Crosslinked Polyethylene Bearings?

S. Kurtz, C. Rimnac, Antonia F. Chen, 2015 .

The reduction half cell in biomaterials corrosion: oxygen diffusion profiles near and cell response to polarized titanium surfaces.

J. Gilbert, E. Chang, C. H. Thomas, 1998, Journal of biomedical materials research.

Fretting corrosion testing of acetabular modular tapers for total hip replacements: A comparison of two designs

A. Mace, J. Gilbert, Charley M. Goodwin, 2023, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Electrode potential, inflammatory solution chemistry and temperature alter Ti-6Al-4V oxide film properties

J. Gilbert, L. M. Taylor, Michael A. Kurtz, 2023, Electrochimica Acta.

CORROSION RESISTANCE OF β-PHASE TITANIUM ALLOYS UNDER SIMULATED INFLAMMATORY CONDITIONS: EXPLORING THE RELEVANCE OF BIOCOMPATIBLE ALLOYING ELEMENTS

Y. Liu, M. Pisarek, M. Matczuk, 2023, Corrosion Science.

Grain egression: A new mechanism of fatigue-crack initiation in Ti-6Al-4V

H. Piehler, J. Gilbert, 1989 .

The electrochemical impedance of polarized 316L stainless steel: structure-property-adsorption correlation.

J. Gilbert, R. Gettens, 2009, Journal of biomedical materials research. Part A.

WOUND CLOSURE BIOMATERIALS AND DEVICES

J. Gilbert, 1999 .

Normal statistics or not?

E. Lautenschlager, J. Gilbert, P. Monaghan, 1992, Journal of Biomedical Materials Research.

Material dependent fretting corrosion in spinal fusion devices: Evaluation of onset and long-term response.

N. Hallab, J. Gilbert, Vaneet Singh, 2018, Journal of biomedical materials research. Part B, Applied biomaterials.

Effect of mixed alloy combinations on fretting corrosion performance of spinal screw and rod implants.

J. Gilbert, Vaneet Singh, S. Mali, 2017, Journal of biomedical materials research. Part B, Applied biomaterials.

A versatile mesoindentation system to evaluate the micromechanical properties of soft, hydrated substrates on a cellular scale.

J. Gilbert, J. Hasenwinkel, Tarun Saxena, 2009, Journal of biomedical materials research. Part A.

Oxide Films on Metallic Biomaterials: Myths, Facts and Opportunities

D. Untereker, J. Gilbert, A. Belu, 2003 .

In-situ electrochemical atomic force microscopy study of morphology of oxide film on etched NiTi alloy: Effects of hydration and potential

J. Gilbert, Zhijun Bai, 2004 .

The Mechanical-Electrochemical Interaction of Passivating Alloys Used in Medicine

J. Gilbert, C. Buckley, E. Lautenshlager, 1994 .

Incorporation of Ca and P on anodized titanium surface: Effect of high current density.

P. Soares, R. Torres, C. Laurindo, 2014, Materials science & engineering. C, Materials for biological applications.

The effect of the inflammatory species hypochlorous acid on the corrosion and surface damage of Ti-6Al-4V and CoCrMo alloys.

J. Gilbert, G. Kubacki, 2018, Journal of Biomedical Materials Research. Part A.

Metallic Degradation and the Biological Environment

J. Gilbert, 2020 .