D. Zumbrunnen

发表

Convective Heat Transfer Enhancement Due to Intermittency in an Impinging Jet

M. Aziz, D. Zumbrunnen, 1993 .

Convective Heat Transfer Enhancement Due to Gas Injection Into an Impinging Liquid Jet

D. Zumbrunnen, M. Balasubramanian, 1995 .

Transient Convective Heat Transfer in Planar Stagnation Flows With Time-Varying Surface Heat Flux and Temperature

D. Zumbrunnen, 1992 .

NUMERICAL ANALYSIS OF CONVECTIVE HEAT TRANSFER FROM A MOVING PLATE COOLED BY AN ARRAY OF SUBMERGED PLANAR JETS

D. A. Zumbrunnen, T. Wang, D. Zumbrunnen, 1994 .

Local and Instantaneous Heat Transfer Characteristics of Arrays of Pulsating Jets

D. Zumbrunnen, H. Sheriff, 1999 .

Means to Improve the Heat Transfer Performance of Air Jet Arrays Where Supply Pressures are Limiting

D. Zumbrunnen, H. Sheriff, 1998 .

The Effect of Surface Motion on Forced Convection Film Boiling Heat Transfer

R. Viskanta, F. Incropera, D. Zumbrunnen, 1989 .

Convective heat and mass transfer in the stagnation region of a laminar planar jet impinging on a moving surface

D. Zumbrunnen, 1991 .

COMPUTATIONAL CLARIFICATIONS OF EXPERIMENTAL BLEND MORPHOLOGY TRANSITIONS IN IMMISCIBLE POLYMER MELTS ORGANIZED BY CHAOTIC ADVECTION

D. Zumbrunnen, A. Joshi, David A. Zumbrunnen, 2006 .

Computational simulation of controllable structure formation among particle additives in a continuous-flow chaotic mixer

D. Zumbrunnen, R. Danescu, 2002 .

A study of heat transfer from stationary and moving plates cooled by planar jets of water

D. Zumbrunnen, 1988 .

Tailored Additive Release Rates in Extruded Plastic Films Produced With Smart Blending Machines

K. Yam, X. Jin, D. Zumbrunnen, 2009 .

Morphology development in polymer blends produced by chaotic mixing at various compositions

D. Zumbrunnen, C. Chhibber, 2002 .

Smart blending technology enabled by chaotic advection

D. Zumbrunnen, R. Subrahmanian, C. Mahesha, 2006 .

Advancing controlled release packaging through smart blending

D. A. Zumbrunnen, Kit L. Yam, Karen M. Schaich, 2005 .

Heat transfer through porous solids with complex internal geometries

R. Viskanta, F. Incropera, D. Zumbrunnen, 1986 .

In Situ Self Assembly of Nanocomposites: Competition of Chaotic Advection and Interfacial Effects as Observed by X-Ray Diffreaction

D. Zumbrunnen, D. Perahia, D. Ratnaweera, 2015, Nanomaterials.

Production of barrier films by chaotic mixing of plastics

D. Zumbrunnen, O. Kwon, 2003 .

Progressive morphology development to produce multilayer films and interpenetrating blends by chaotic mixing

D. A. Zumbrunnen, D. Zumbrunnen, O. Kwon, 2001 .

19 – Chaotic Advection and Its Application to Extruding Micro- and Nanostructured Plastic Materials

D. Zumbrunnen, 2017 .

Chaotic Advection and Its Application to Extruding Micro- and Nanostructured Plastic Materials

D. Zumbrunnen, 2011 .

In situ assembly using a continuous chaotic advection blending process of electrically conducting networks in carbon black-thermoplastic extrusions

D. Zumbrunnen, V. A. Chougule, 2005 .

Mechanical properties of PP-LDPE blends with novel morphologies produced with a continuous chaotic advection blender

S. Ramaswami, D. Zumbrunnen, B. Kulshreshtha, 2005 .

Smart Blending: Functional Fine-Scale Structures Formed by Intelligent Agitations in Multi-Component Melts

D. Zumbrunnen, 2003 .

Effect of interdiffusion regions on penetrant flux through multilayer films

D. Hirt, D. Zumbrunnen, Shilpa Y. Sankhe, 2001 .

Novel sub-micron highly multi-layered polymer films formed by continuous flow chaotic mixing

D. A. Zumbrunnen, D. Zumbrunnen, S. Inamdar, 2001 .

Smart Blending: a Means to Obtain Fibers and Plastic Products with Tailored Properties

D. Zumbrunnen, 2000 .

Toughness enhancement in polymer blends due to the in-situ formation by chaotic mixing of fine-scale extended structures

D. Zumbrunnen, Y. H. Liu, 1999 .

Chaotic mixing of two similar fluids in the presence of a third dissimilar fluid

D. Zumbrunnen, D. Zhang, 1996 .

Influences of Fluidic Interfaces on the Formation of Fine Scale Structure by Chaotic Mixing

D. Zumbrunnen, D. Zhang, 1996 .

Auto-processing of very fine-scale composite materials by chaotic mixing of melts

D. Zumbrunnen, K. Miles, Y. H. Liu, 1996 .

Alterations to coherent flow structures and heat transfer due to pulsations in an impinging air-jet

D. A. Zumbrunnen, Emilia-Cerna Mladin, D. Zumbrunnen, 2000 .

A new flexible manufacturing process for tailoring release rates in controlled release packaging and drug delivery systems

X. Jin, D. A. Zumbrunnen, A. Balasubramanian, 2009 .

Dependence of Heat Transfer to a Pulsating Stagnation Flow on Pulse Characteristics

D. A. Zumbrunnen, Emilia-Cerna Mladin, D. Zumbrunnen, 1995 .

Nonlinear dynamics of laminar boundary layers in pulsatile stagnation flows

D. Zumbrunnen, E. Mladin, 1994 .

Chaotic Mixing in Extrusion-Based Melt Spinning of Fibers

D. Zumbrunnen, M. Ellison, Jiong Wang, 1997 .

Effect of Flow Pulsations on the Cooling Effectiveness of an Impinging Jet

D. A. Zumbrunnen, D. Zumbrunnen, H. S. Sheriff, 1994 .

Emergence of fibrillar composites due to chaotic mixing of molten polymers

D. Zumbrunnen, Y. H. Liu, 1996 .

Chaotic Advection as a Means to Develop Nanoscale Structures in Viscous Melts

D. Zumbrunnen, P. Verma, O. Kwon, 2002 .

Production of electrically conducting plastic composites by three‐dimensional chaotic mixing of melts and powder additives

D. A. Zumbrunnen, D. Zumbrunnen, R. I. Danescu, 2000 .

Creation of Conducting Networks among Particles in Polymer Melts by Chaotic Mixing

D. Zumbrunnen, R. Danescu, 1998 .

Creation of Electrically Conducting Plastics by Chaotic Mixing

D. Zumbrunnen, R. Danescu, 1999 .

The Production of Improved Plastic Materials by Chaotic Mixing of Polymer Melts Recovered from Environmental Waste

D. Zumbrunnen, 1999 .

Production of Electrically Conducting Plastics at Reduced Carbon Black Concentrations by Three-Dimensional Chaotic Mixing

D. Zumbrunnen, R. Danescu, 1999 .

Morphology development in shear flows of straight and folded molten fibers

D. Zumbrunnen, Y. H. Liu, D. Zhang, 1998 .

A laminar boundary layer model of heat transfer due to a nonuniform planar jet impinging on a moving plate

R. Viskanta, F. Incropera, D. Zumbrunnen, 1992 .

Method and apparatus for measuring heat transfer distributions on moving and stationary plates cooled by a planar liquid jet

D. A. Zumbrunnen, D. Zumbrunnen, 1990 .