J. Kwak

发表

Effects of turbine blade tip shape on total pressure loss and secondary flow of a linear turbine cascade

J. Park, Y. Nho, Yong Jin Lee, 2012 .

Experimental and Numerical Study on the Effect of Fan-Shaped Hole Configuration on Film Cooling Effectiveness

Young-Seok Kang, J. Kwak, H. Seo, 2019, Volume 5B: Heat Transfer.

An experimental investigation on the effects of a slot exit protrusion on film cooling effectiveness

J. Kwak, G. Kim, J. Choi, 2022, International Journal of Thermal Sciences.

Effects of trench configuration on the film cooling effectiveness of a fan-shaped hole

J. Kwak, S. H. Park, Y. Song, 2021 .

Improvement of Film Cooling Performance of a Slot on a Flat Plate Using Coanda Effect

J. Kwak, G. Kim, Y. Kim, 2017 .

Heat Transfer Coefficient and Film-Cooling Effectiveness on the Squealer Tip of a Gas Turbine Blade

Je-Chin Han, Jae Su Kwak, Je-Chin Han, 2002 .

Heat Transfer Coefficient and Film-Cooling Effectiveness on a Gas Turbine Blade Tip

Je-Chin Han, Jae Su Kwak, Je-Chin Han, 2002 .

Oxygen sensitivity of photoluminescence intensity of Pt complex dispersed in fluorinated acrylate for pressure sensitive paint applications

Y. Choi, J. Kwak, 2014, Electronic Materials Letters.

Effect of Cone Angle of a Seven-Hole Probe on the Accuracy Flow Measurement

J. Park, Y. Nho, J. Kwak, 2011 .

Effects of rim location, rim height, and tip clearance on the tip and near tip region heat transfer of a gas turbine blade

Je-Chin Han, J. Kwak, Jaeyong Ahn, 2004 .

Measurement of the Detailed Heat Transfer Coefficient in the Rotating Dimpled Rectangular Channel

J. Kwak, C. Jeon, S. Park, 2009 .

Effect of Inlet Velocity Profile on Heat Transfer in a Rotating Channel

J. Park, J. Chung, J. Kwak, 2013 .

Effect of Inlet Velocity Distribution on the Heat Transfer Coefficient in a Rotating Smooth Channel

J. Kwak, Yong-Jin Lee, C. Jeon, 2011 .

Heat Transfer and Secondary Flow with a Multicavity Gas Turbine Blade Tip

J. Park, J. Chung, S. H. Lee, 2016 .

Effects of Tip Shape on the Gas Turbine Blade Tip Heat Transfer

Y. Nho, Yong Jin Lee, J. Kwak, 2012 .

Effect of Groove Shape of Blade Tip on Tip Surface Heat Transfer Coefficient Distributions of a Turbine Cascade

Y. Nho, J. Kwak, Yong-Jin Lee, 2010 .

Effect of Blade Tip Geometry on Heat Transfer Coefficients on Gas Turbine Blade Tips and Near Tip Regions

J. Kwak, 2006 .

A Study of Wear Behavior for Sealing Graphite at Elevated Temperature

Jae-Hoon Kim, J. Kwak, SeungBum Lee, 2013 .

Sliding Wear Properties of Graphite as Sealing Materials for Cut off Hot Gas

Jae-Hoon Kim, J. Kwak, SeungBum Lee, 2013 .

Effect of Triangular Grooved Tip on Blade Tip Region Heat Transfer

Jung Shin Park, Jin Taek Chung, Jae Su Kwak, 2014 .

An Experimental Study of the Leakage Flow Effect on the Film Cooling Effectiveness of a Gas Turbine Shroud

J. Kwak, S. Kim, G. Kim, 2021 .

Flow Characteristics in a Rectangular Mixing Chamber with Two Jets

J. Park, H. Sung, J. Kwak, 2016 .

Effects of the Mainstream Temperature History on the Transient Heat Transfer Measurement

J. Park, J. Kwak, H. Jang, 2016 .

Effect of Particle Size and Velocity Ratio on the Flow Mixing Characteristics in the Secondary Combustor

J. Park, H. Sung, J. Kwak, 2014 .

Numerical and experimental studies on the mixing characteristics of two jets with inclined angles in a rectangular chamber

J. Park, H. Sung, J. Kwak, 2014 .

Experimental Investigation on the Effects of DBD Plasma on the Film Cooling Effectiveness of a 30-Degree Slot

Youhwan Shin, Ye Kim, Gi Kim, 2017 .

Heat transfer augmentation using a rib–dimple compound cooling technique

Jae Su Kwak, J. Chung, J. Kwak, 2013 .

Effects of inlet velocity profile on flow and heat transfer in the entrance region of a ribbed channel

J. Park, J. Chung, Byungju Lee, 2016 .

Heat transfer coefficients on the squealer tip and near squealer tip regions of a gas turbine blade

Je-Chin Han, Jae Su Kwak, Je-Chin Han, 2003 .

Heat transfer in a rectangular duct with perforated blockages and dimpled side walls

J. Park, J. Kwak, Y. H. Jo, 2016 .

Heat Transfer Coefficient and Film Cooling Effectiveness on the Partial Cavity Tip of a Gas Turbine Blade

J. Park, J. Kwak, J. Jeong, 2018, Journal of Turbomachinery.

Heat Transfer Coefficients and Film Cooling Effectiveness on the Squealer Tip of a Gas Turbine Blade

Je-Chin Han, Jae Su Kwak, Je-Chin Han, 2003 .

Optimization of the configuration of the laidback fan-shaped film cooling hole with a lateral expansion angle of 10 degrees

J. Park, J. Kwak, H. Seo, 2019, Applied Thermal Engineering.

Effect of Channel Orientation on the Heat Transfer Coefficient in the Smooth and Dimpled Rotating Rectangular Channels

J. Kwak, S. Kim, E. Choi, 2012 .

Heat-Transfer Coefficients of a Turbine Blade-Tip and Near-Tip Regions

Je-Chin Han, Jae Su Kwak, Je-Chin Han, 2002 .

Effect of Clearance and Cavity Geometries on Leakage Performance of a Stepped Labyrinth Seal

T. Kim, S. Moon, J. Kwak, 2020 .

Effects of tip clearance, number of teeth, and tooth front angle on the sealing performance of straight and stepped labyrinth seals

T. Kim, J. Kwak, Y. Kang, 2021, Journal of Mechanical Science and Technology.

Measurement of the heat transfer coefficient in the dimpled channel: effects of dimple arrangement and channel height

J. Kwak, S. Park, K. Lee, 2009 .

Effect of Dimple Configuration on Heat Transfer Coefficient in a Rotating Channel

J. Kwak, S. Kim, E. Choi, 2011 .

Experimental study on heat transfer characteristics in a ribbed channel with dimples, semi-spherical protrusions, or oval protrusions

J. Park, J. Kwak, H. Jang, 2018 .

Effect of hole shape on the heat transfer in a rectangular duct with perforated blockage walls

Jae Su Kwak, Somin Shin, J. Kwak, 2008 .

Effect of Dimple Configuration on Heat Transfer Coefficient in a Rib-Dimpled Channel

Jae Su Kwak, J. Kwak, Eun Yeong Choi, 2013 .

Effect of channel height on the heat transfer coefficient of a rotation dimpled channel

J. Kwak, S. Kim, Yong-Jin Lee, 2010 .

Effect of Anti-Vortex Hole Angle on the Flat Plate Film Cooling Effectiveness

J. Park, S. H. Lee, J. Kwak, 2014 .

Experimental optimization of a fan-shaped film cooling hole with 30 degrees-injection angle and 6-hole length-to-diameter ratio

Young-Seok Kang, J. Kwak, H. Seo, 2019 .

Optimization of the Coanda bump to improve the film cooling effectiveness of an inclined slot

J. Kwak, G. Kim, J. Choi, 2019, International Journal of Thermal Sciences.

Comparative Study on the Film Cooling Effectiveness of 15 ° Angled Anti-Vortex Hole and 30-7-7 Fan-Shaped Hole Using PSP Technique

Ye Jee Kim, Soon Sang Park, Dong Ho Rhee, 2016 .

Measurement of the Film Cooling Effectiveness on a Flat Plate using Pressure Sensitive Paint

J. Kwak, S. Park, K. Lee, 2008 .

Measurement of Blade Tip Heat Transfer and Leakage Flow in a Turbine Cascade With a Multi-Cavity Squealer Tip

J. Park, J. Chung, S. H. Lee, 2013 .

Development of a plate-fin type gas turbine recuperator

Inyoung Yang, Jae Su Kwak, J. Kwak, 2006 .

Comparative Study of the Steady State and Transient TSP Techniques in the Heat Transfer Measurement by an Inclined Impingement Jet

Y. Nho, Yong Jin Lee, J. Kwak, 2012 .

Basic Research Trends on Labyrinth Seal of Gas Turbine

Dong Hyun Kim, Young Jun Kang, Soo In Lee, 2020 .