B. Feng

发表

Effect of temperature and humidity on the flammability limits of hydrocarbons

Zhao Yang, Rui Zhai, Yong Zhang, 2020, Fuel.

Experimental research on the concentration characteristics of R32 and R161′ combustion product HF

Zhao Yang, Rui Zhai, B. Feng, 2017 .

Strain-induced phase transformations under high pressure and large shear in a rotational diamond anvil cell: Simulation of loading, unloading, and reloading

V. Levitas, B. Feng, O. M. Zarechnyy, 2014 .

Tribology behavior during indentation and scratch of thin films on substrates: effects of plastic friction

Zhitong Chen, B. Feng, 2015 .

Size effect in micro-scale cantilever beam bending

Shaohua Chen, B. Feng, 2011 .

Research on miscibility performances of refrigerants with mineral lubricating oils

Zhao Yang, Rui Zhai, Zijian Lv, 2019, Applied Thermal Engineering.

Screening of sugar alcohols and their binary eutectic mixtures as phase change materials for low-to-medium temperature latent heat storage. (Ⅰ): Non-isothermal melting and crystallization behaviors

Liwu Fan, Yi Zeng, B. Feng, 2018, Energy.

Miscibility performance of trans-1,3,3,3-tetrafluoroprop-1-ene and its binary blends with lubricating oil

Zhao Yang, Rui Zhai, B. Feng, 2017 .

Evaluation of fracture toughness and residual stress for both single GYbZ and double layered GYbZ/8YSZ coatings by modified indentation tests

D. Fang, Junan Pan, C. Dai, 2020, Surface and Coatings Technology.

In situ characterizations of mechanical behaviors of freestanding (Gd0.9Yb0.1)2Zr2O7 coatings by bending tests under different temperatures based on digital image correlation

D. Fang, C. Dai, Huiyu Huang, 2020 .

Experimental and numerical analysis of tribological behavior of CrAl(Si)N films during Scratch

Zhitong Chen, B. Feng, Yuan Xia, 2015, 1511.04092.

Miscibility Measurement and Evaluation for the Binary Refrigerant Mixture Isobutane (R600a) + 1,1,1,2,3,3,3-Heptafluoropropane (R227ea) with a Mineral Oil

Zhao Yang, Xi Wu, R. Zhai, 2015 .

Tensorial stress−strain fields and large elastoplasticity as well as friction in diamond anvil cell up to 400 GPa

V. Levitas, M. Kamrani, B. Feng, 2019, npj Computational Materials.

Coupled elastoplasticity and plastic strain-induced phase transformation under high pressure and large strains: Formulation and application to BN sample compressed in a diamond anvil cell

V. Levitas, B. Feng, 2017 .

Plastic flows and strain-induced alpha to omega phase transformation in zirconium during compression in a diamond anvil cell: Finite element simulations

V. Levitas, B. Feng, 2017 .

Strain-induced phase transformation under compression in a diamond anvil cell: Simulations of a sample and gasket

V. Levitas, Yanzhang Ma, B. Feng, 2014 .

Plastic flows and phase transformations in materials under compression in diamond anvil cell: Effect of contact sliding

V. Levitas, B. Feng, O. M. Zarechnyy, 2013 .

Strain-induced phase transformations under compression, unloading, and reloading in a diamond anvil cell

V. Levitas, B. Feng, O. M. Zarechnyy, 2013 .

Pressure Self-focusing Effect and Novel Methods for Increasing the Maximum Pressure in Traditional and Rotational Diamond Anvil Cells

V. Levitas, B. Feng, 2017, Scientific Reports.

Analysis of lower GWP and flammable alternative refrigerants

Yong Zhang, B. Feng, Lei Zhang, 2021 .

Research on inhibition of flame retardants on flammability of R1234yf

Zhao Yang, B. Feng, Hua Liu, 2020 .

Experimental study on the influence of the flame retardants on the flammability of R1234yf

Zhao Yang, Rui Zhai, B. Feng, 2018 .

Research on burning velocity of R152a and its binary mixture

Zhao Yang, B. Feng, 2021 .

Coupled strain-induced alpha to omega phase transformation and plastic flow in zirconium under high pressure torsion in a rotational diamond anvil cell

V. Levitas, M. Kamrani, B. Feng, 2018, Materials Science and Engineering: A.

Optimization of thermal performance of high temperature sensible heat thermal energy storage system for direct steam generation: a simulation work

B. Feng, Yu-Chen Li, Liang Zhang, 2022, Applied Thermal Engineering.

Atomistic insights into the effects of hydrogen bonds on the melting process and heat conduction of erythritol as a promising latent heat storage material

Liwu Fan, B. Feng, Feng Biao, 2019 .

FEM modeling of plastic flow and strain-induced phase transformation in BN under high pressure and large shear in a rotational diamond anvil cell

V. Levitas, B. Feng, W. H. Li, 2019, International Journal of Plasticity.

A molecular dynamics study of the effects of crystalline structure transition on the thermal conductivity of pentaerythritol as a solid-solid phase change material

Liwu Fan, B. Feng, Feng Biao, 2019, International Journal of Heat and Mass Transfer.

Engineered periodic quadrupole superstructure in ferroelectric thin films via flexoelectricity

B. Feng, Xiandong Zhou, Bai-Xiang Xu, 2021 .

Effect of environmental condition on the flammability limits of two isomers of tetrafluoropropene

Zhao Yang, Rui Zhai, B. Feng, 2019, Combustion and Flame.

Theoretical and experimental studies on the combustion mechanism of Trans-1, 3, 3, 3-tetrafluoroprop-1-ene

Zhao Yang, Rui Zhai, Zijian Lv, 2019 .

Research on oxidation decomposition mechanism of fluoroethane

S. Ma, Guanjia Zhao, B. Feng, 2023, International Journal of Refrigeration.

Study of Maillard Reaction Inhibitors for the Sugar Cane Processing

B. Feng, J. Christian, M. D. Pacheco, 2012 .

Highly efficient and selective recovery of Au(III) from a complex system by molybdenum disulfide nanoflakes

Chengzhang Yao, B. Feng, Shanshan Tong, 2018, Chemical Engineering Journal.

Influence of Emulsifier on Surface Mass Transfer Based on Molecular Dynamics Simulations

L. Kong, B. Feng, Xiujie Quan, 2020, Frontiers in Materials.

FEM simulation of large deformation of copper in the quasi-constrain high-pressure-torsion setup

V. Levitas, M. Kamrani, B. Feng, 2017 .

Coupled phase transformations and plastic flows under torsion at high pressure in rotational diamond anvil cell: Effect of contact sliding

V. Levitas, B. Feng, 2013 .

Rate dependence and anisotropy of SiC response to ramp and wave-free quasi-isentropic compression

T. Germann, P. Branicio, X. Yao, 2021 .

Three-dimensional modeling and simulations of single-crystal and bi-crystal titanium for high-strain-rate loading conditions

W. H. Li, E. Cerreta, Zhen Liu, 2020 .

Effects of gasket on coupled plastic flow and strain-induced phase transformations under high pressure and large torsion in a rotational diamond anvil cell

V. Levitas, B. Feng, 2016 .

Effects of surface roughness on scratch resistance and stress-strain fields during scratch tests

B. Feng, 2017 .

Prediction of the initial thickness of shear band localization based on a reduced strain gradient theory

Shaohua Chen, Yueguang Wei, B. Feng, 2011 .

Shear driven formation of nano-diamonds at sub-gigapascals and 300 K

W. Goddard, V. Levitas, J. Chaudhuri, 2018, Carbon.

Large elastoplasticity under static megabar pressures: Formulation and application to compression of samples in diamond anvil cells

R. Hemley, V. Levitas, B. Feng, 2016 .

On the grain size dependence of shock responses in nanocrystalline sic ceramics at high strain rates

T. Germann, W. H. Li, Xiaoqing Zhang, 2020 .

Atomistic Insights into the Heat Conductance Across the Interfaces between Erythritol and Different Metals: A Non-Equilibrium Molecular Dynamics Study

B. Feng, Yi Zeng, Liwu Fan, 2022, SSRN Electronic Journal.

Asymmetrical carbon nanotubes exhibit opposing thermal rectification behaviors under different heat baths

I. Chang, B. Feng, W. Ong, 2022, International Journal of Heat and Mass Transfer.

Finite element modeling and simulations on indentation and scratch tests on thin films: effects of prestress

B. Feng, Zhen Liu, 2019, MRS Communications.

Tribology behavior on scratch tests: Effects of yield strength

B. Feng, 2017 .

Dynamic Simulation and Optimization of High Voltage Circuit Breaker Structure Based on Finite Element

B. Feng, Yuqing Hou, 2020, Journal of Physics: Conference Series.

Large elastoplastic deformation of a sample under compression and torsion in a rotational diamond anvil cell under megabar pressures

V. Levitas, B. Feng, 2017 .

Experimental study on the contribution of R161 and R1234yf to the miscibility of R32 with lubricating oils

Zhao Yang, Rui Zhai, Zijian Lv, 2020 .

Effect of gas disturbance on combustion characteristics of flammable refrigerants near LFLs.

Zhao Yang, Rui Zhai, Zijian Lv, 2019, Journal of hazardous materials.

Modeling of Strain-Induced Phase Transformations Under High Pressure and Shear

V. Levitas, M. Kamrani, B. Feng, 2018 .

Finite-Element Simulations of Elastoplastic Flow during Compression of a Sample in a Diamond Anvil Cell under Extremely High Pressure: Effects of Geometry and Material Properties

V. Levitas, B. Feng, 2018, Physical Review Applied.

Digital Repository @ Iowa State University Coupled phase transformations and plastic flows under torsion at high pressure in rotational diamond anvil cell: Effect of contact sliding

V. Levitas, B. Feng, 2022 .

High-temperature sensor based on resonant reflection in hollow core fiber

Yi Liu, Shiliang Qu, Biao Feng, 2016 .

Determination on the thermal conductivity and thermal contact resistance of thin composite phase change films as a thermal interfacial material

Liwu Fan, Zitao Yu, B. Feng, 2022, Case Studies in Thermal Engineering.

Dynamics on the Interactions between Vegetable Growth and Water Erosion

Tousheng Huang, B. Feng, Feifan Zhang, 2013 .