I. Budak

发表

Failure of the pinion from the drive of a cement mill

A. Nagode, G. Kosec, I. Budak, 2011 .

FIXTURE LAYOUT DESIGN BASED ON A SINGLE-SURFACE CLAMPING WITH LOCAL DEFORMATION

Tadic, I. Budak, Tadić, 2015 .

Computer-aided methods for single-stage fibrous dysplasia excision and reconstruction in the zygomatico-orbital complex

A. Kiralj, I. Budak, M. Sokac, 2019, Rapid Prototyping Journal.

Investigation of Influence by Different Segmentation Parameters on Surface Accuracy in Industrial X-ray Computed Tomography

M. Katic, D. Vukelic, I. Budak, 2021, Lecture Notes in Mechanical Engineering.

Application of Replica Technique and SEM in Accuracy Measurement of Ceramic Crowns

J. Hodolic, D. Jevremović, D. Vukelic, 2012 .

Evaluation of the environmental impact of plastic cap production, packaging, and disposal.

Milana Ilic Micunovic, D. Vukelic, I. Budak, 2019, Journal of environmental management.

Eco-design of a low-cost adsorbent produced from waste cherry kernels

S. Pap, J. Radonić, D. Vukelic, 2018 .

Investigation of radiation level and assessment of dimensional accuracy of acquired CBCT images

D. Vukelic, I. Budak, M. Sokac, 2020 .

Evaluation of an environment-friendly turning process of Inconel 601 in dry conditions

D. Vukelic, K. Simunovic, I. Budak, 2020 .

INFLUENCE OF THE WAYS FOR REMOVING THE EXCESS OF COMPOSIT RESIN CEMENT MATERIALS ON THE SURFACE ROUGHNESS DEGREE

D. Jevremović, I. Budak, A. Todorović, 2010 .

Accuracy improvement of point data reduction with sampling-based methods by Fuzzy logic-based decision-making

Branimir Barišić, Mirko Soković, Igor Budak, 2011 .

Application of modern computer-aided technologies in the production of individual bone graft: A case report.

I. Budak, M. Sokac, Z. Santosi, 2015, Vojnosanitetski pregled.

The analysis of particles emission during the process of grinding of steel EN 90MNV8

J. Hodolic, A. Nagode, I. Budak, 2014 .

INFLUENCE OF TOOL WEAR CONDITION ON TOOL VIBRATIONS

I. Budak, A. Antić, B. Kosec, 2011 .

Measurement of dental crown wear -In vitro study.

B. Miličić, I. Budak, A. Todorović, 2020, Dental materials journal.

Size and shape particle analysis by applying image analysis and laser diffraction – Inhalable dust in a dental laboratory

J. Hodolic, A. Nagode, I. Budak, 2015 .

Comparative life cycle assessment of Ni-based catalyst synthesis processes

I. Budak, B. Kosec, Ž. Kamberović, 2017 .

Multi-criteria analysis of synthesis methods for Ni-based catalysts

I. Budak, B. Kosec, Ž. Kamberović, 2016 .

MULTI-CRITERIA ANALYSIS OF SYNTHESIS METHODS FOR Ni-BASED CATALYSTS VE

I. Budak, B. Kosec, V. Nikoli, 2016 .

A Comparative Analysis of the Corrosive Effect of Artificial Saliva of Variable pH on DMLS and Cast Co-Cr-Mo Dental Alloy

Djordje Vukelic, Igor Budak, Tatjana Puskar, 2014, Materials.

Life cycle and energy performance assessment of three wall types in south-eastern Europe region

Igor Budak, Boris Agarski, Miroslava Radeka, 2016 .

Influence of Implant Impression Methods, Polymer Materials, and Implant Angulation on the Accuracy of Dental Models

B. Milekic, D. Vukelic, I. Budak, 2022, Polymers.

Multi-criteria decision-making and life cycle assessment model for optimal product selection: case study of knee support

D. Vukelic, I. Budak, B. Tadic, 2017, International Journal of Environmental Science and Technology.

3D Reconstruction of Patient-Specific Dental Bone Grafts by Application of Reverse Engineering Modeling

I. Budak, Z. Santosi, Đ. Vukelić, 2019 .

The Use of CAD/CAM Technology in Design and Manufacture of Thin Laminate Veneers

J. Hodolic, D. Jevremović, D. Vukelic, 2012 .

Improved surface extraction of multi-material components for single-source industrial X-ray computed tomography

Djordje Vukelic, Zeljko Santosi, Mario Sokac, 2020 .

The analysis of the mechanical properties of F75 Co-Cr alloy for use in selective laser melting (SLM) manufacturing of removable partial dentures (RPD)

Igor Budak, Tatjana Puskar, Borut Kosec, 2012 .

Comparative analysis on measuring performances of dental intraoral and extraoral optical 3D digitization systems

Djordje Vukelic, Branka Trifkovic, Igor Budak, 2014 .

Evaluation of synthetically generated patterns for image-based 3D reconstruction of texture-less objects

Mario Sokac, Vesna Stojaković, Željko Santoši, 2019 .

Fuzzy multi-criteria-based impact category weighting in life cycle assessment

Janko Hodolic, Djordje Vukelic, Igor Budak, 2016 .

FEM modeling and analysis in prevention of the waterway dredgers crane serviceability failure

Igor Budak, Borut Kosec, Aco Antić, 2013 .

Optimal finite elements method (FEM) model for the jib structure of a waterway dredger

Mirko Soković, Igor Budak, Borut Kosec, 2012 .

Fuzzy Hybrid Method for the Reconstruction of 3D Models Based on CT/MRI Data

Djordje Vukelic, Miodrag Hadzistevic, Mario Sokac, 2019, Strojniški vestnik – Journal of Mechanical Engineering.

3D DIGITIZATION OF FEATURELESS DENTAL MODELS USING CLOSE RANGE PHOTOGRAMMETRY AIDED BY NOISE BASED PATTERNS

Branka Trifkovic, Igor Budak, Mario Sokac, 2018, Facta Universitatis, Series: Mechanical Engineering.

Model for analysis of environmental impacts of production processes in flooring industry based on LCA

Milan Kljajin, Djordje Vukelic, Janko Hodolic, 2014 .

An Approach to Modelling of Personalized Bone Grafts Based on Advanced Technologies

Mario Sokac, Igor Budak, Sinisa Mirkovic, 2016 .

Life cycle assessment of injection moulding tools and multicomponent plastic cap production

Milana Ilic Micunovic, D. Vukelic, I. Budak, 2023, Journal of Cleaner Production.

Evaluation of Residual Stresses after Irregular Interrupted Machining

A. Czán, I. Budak, A. Antić, 2018, Tehnicki vjesnik - Technical Gazette.

Comparative exergy-based life cycle assessment of conventional and hybrid base transmitter stations

Djordje Vukelic, Igor Budak, Branislav Milanovic, 2017 .

B. Popkonstantinović, Z. Milojević, I. Budak, 2021, Applied Sciences.

Comparison of approaches to weighting of multiple criteria for selecting equipment to optimize performance and safety

Miodrag Hadzistevic, Djordje Vukelic, Igor Budak, 2019, International journal of occupational safety and ergonomics : JOSE.

A model for prioritizing landfills for remediation and closure: A case study in Serbia

N. Stanisavljević, I. Budak, N. Maodus, 2018, Integrated environmental assessment and management.

An Approach to Multi-criteria Environmental Evaluation with Multiple Weight Assignment

Janko Hodolic, Borut Kosec, Igor Budak, 2012, Environmental Modeling & Assessment.

Optimization of Surface Roughness Based on Turning Parameters and Insert Geometry

M. Prica, I. Budak, O. Lužanin, 2022, International Journal of Simulation Modelling.

Automatic recognition of cylinders and planes from unstructured point clouds

Zivana Jakovljevic, Igor Budak, Veljko Markovic, 2021, Vis. Comput..

APPLICATION OF MULTI-CRITERIA ASSESSMENT IN EVALUATION OF MOTOR VEHICLES' ENVIRONMENTAL PERFORMANCES

Milan Kljajin, Branko Tadic, Djordje Vukelic, 2012 .

Pre-Processing of Point-Data from Contact and Optical 3D Digitization Sensors

Djordje Vukelic, Janko Hodolic, Igor Budak, 2012, Sensors.

Using a high-stiffness burnishing tool for increased dimensional and geometrical accuracies of openings

Branko Tadic, Djordje Vukelic, Sasa Randjelovic, 2016 .