D. Ewing

发表

Measurement of periodic micro flows using micro-particle image velocimetry with phase sampling

P. Selvaganapathy, Wen-I Wu, C. Ching, 2013 .

Effect of number of mesh layers and fluid loading on the performance of screen mesh wicked heat pipes

R. Kempers, C. Ching, D. Ewing, 2006 .

Numerical and Experimental Study of a Hybrid Thermoelectric Cooler Thermal Management System for Electronic Cooling

C. Ching, D. Ewing, M. Russel, 2012, IEEE Transactions on Components, Packaging and Manufacturing Technology.

On the non-destructive measurement of local mass transfer using X-ray computed tomography

M. Noseworthy, J. Cotton, C. Ching, 2015 .

The Effect of Naturally Developing Roughness on the Mass Transfer in Pipes Under Different Reynolds Numbers

C. Ching, D. Ewing, D. Wang, 2017 .

Mass transfer in back to back elbows arranged in an out of plane configuration under annular two phase flow conditions

C. Ching, D. Ewing, T. Le, 2014 .

Mass transfer in dual pipe bends arranged in an S-configuration

J. Cotton, H. Mazhar, C. Ching, 2014 .

Experimental investigation of mass transfer in 90° pipe bends using a dissolvable wall technique

J. Cotton, H. Mazhar, C. Ching, 2013 .

The effect of the top and bottom wall temperatures on the laminar natural convection in an air-filled square cavity

C. Ching, D. Ewing, Chan Y. Ching, 2006 .

Heat transfer from a surface into a confined gap over a saturated porous plate

J. Chang, C. Ching, D. Ewing, 2014 .

The Effect of Pore Size on the Heat Transfer Between a Heated Finned Surface and a Saturated Porous Plate

J. Chang, M. Schertzer, C. Ching, 2009 .

The effect of gap distance on the heat transfer between a heated finned surface and a saturated porous plate

M. Schertzer, C. Ching, D. Ewing, 2006 .

Experimental study on boiling instability and occurrence of cavitation in a two-phase square pipe subjected to natural convection

N. Fujisawa, C. Ching, D. Ewing, 2020, Heat and Mass Transfer.

Thermal Modeling of a Rotating Heat Pipe Aero-Engine Nose Cone Anti-Icing System

C. Ching, D. Ewing, S. Gilchrist, 2004 .

Measurement of the flow field characteristics in single and dual S-shape 90° bends using matched refractive index PIV

J. Cotton, H. Mazhar, C. Ching, 2016 .

Spectral Linear Stochastic Estimation of the Turbulent Velocity in a Square Three-Dimensional Wall Jet

D. Ewing, J. Hall, 2007 .

Passive control of a planar offset attaching jet using a perforated bottom plate over a closed cavity

D. Ewing, N. Gao, Yueqing Xia, 2020 .

Heat transfer in turbulent planar offset attaching jets with small initial offset distances

C. Ching, D. Ewing, N. Gao, 2015 .

Measurements of wall shear stress of an offset attaching planar jet with co-flow

J. Naughton, D. Ewing, N. Gao, 2006 .

Investigation of the Large Scale Flow Structures in Dual Planar Attaching Jets

D. Ewing, N. Gao, 2006 .

Investigation on cooling behavior of axially rotating heat pipe in profile grinding of turbine blade slots

Yucan Fu, C. Ching, D. Ewing, 2021 .

On the dynamics of the large-scale structures in round impinging jets

D. Ewing, J. Hall, 2006, Journal of Fluid Mechanics.

Three-Dimensional Turbulent Wall Jets Issuing from Moderate-Aspect-Ratio Rectangular Channels

D. Ewing, J. Hall, 2007 .

The Asymmetry of the Large-Scale Structures in Turbulent Three-Dimensional Wall Jets Exiting Long Rectangular Channels

D. Ewing, J. Hall, 2007 .

The Rectangular Wall Jet. Part 1: The Effect of Varying Aspect Ratio

D. Ewing, J. Hall, 2005 .

Effects of Wall Proximity on Round Jets

A. Benaissa, D. Ewing, J. Morrison, 1998 .

Evolution of the large scale motions in a three-dimensional wall jet

D. Ewing, A. Pollard, 1997 .

Measurement of Multi-Dimension Soot Distribution in Diesel Particulate Filters by a Dynamic Neutron Radiography

Jen-Shih Chang, G. Harvel, D. Ewing, 2009 .

Investigation of the effect of confinement on the heat transfer to round impinging jets exiting a long pipe

D. Ewing, N. Gao, 2006 .

On the Design of an Aero-Engine Nose Cone Anti-Icing System Using a Rotating Heat Pipe

C. Ching, D. Ewing, S. Gilchrist, 2009 .

Effects of surface roughness and bend geometry on mass transfer in an S-shaped back to back bend at Reynolds number of 200,000

C. Ching, D. Ewing, Dong Wang, 2018 .

Low pressure boiling instabilities in a T-type thermosyphon

C. Ching, D. Ewing, A. Zaghlol, 2019, Experimental Thermal and Fluid Science.

Differential thermal analysis, thermal gravimetric analysis, and solid phase micro-extraction gas chromatography analysis of water and fuel absorption in diesel soot

J. Chang, J. Cotton, D. Ewing, 2010 .

Effect of Initial and Boundary Conditions on Development of Three-Dimensional Wall Jets

Hongguang Sun, D. Ewing, 2002 .

Flow and heat transfer measurements in a planar offset attaching jet with a co-flowing wall jet

J. Naughton, C. Ching, D. Ewing, 2014 .

On the phase velocities of the motions in an offset attaching planar jet

D. Ewing, N. Gao, 2008 .

Reforming of diesel fuel by a recirculation type pulsed voltage electrohydrodynamic atomization

J. Chang, G. Harvel, D. Ewing, 2011, 2011 IEEE International Conference on Dielectric Liquids.

Electrohydrodynamic atomization two-phase flow regime map for liquid hydrocarbon under pulsed electric fields with co-gas flow

J. Chang, S. Matsumoto, G. Harvel, 2008 .

Investigation of the Large-Scale Flow Structures in the Cooling Jets Used in the Blown Film Manufacturing Process

D. Ewing, N. Gao, 2005 .

Experimental Investigation of the Effect of the Bubble Cone on the Cooling Jets used in the Blown Film Manufacturing Process

D. Ewing, N. Gao, S. Li, 2005 .

Experimental Investigation of the Effect of the Bubble Cone on the Cooling Jets used in the Blown Film Manufacturing Process

D. Ewing, N. Gao, S. Li, 2005, International Polymer Processing.

Investigation of the Cooling Jets Used in the Blown Film Process

D. Ewing, N. Gao, S. Li, 2005 .

Measurement of Local Mass Transfer and the Resulting Roughness in a Large Diameter S-Bend at High Reynolds Number

C. Ching, D. Ewing, D. Wang, 2016 .

Mass transfer in back-to-back elbows arranged in an out of plane configuration

C. Ching, D. Ewing, T. Le, 2014 .

Mass Transfer in Single Bends Under Annular Two Phase Flow Conditions

J. Cotton, H. Mazhar, C. Ching, 2014 .

Time-resolved refractive index matched PIV measurements inside and downstream of a 90° bend

C. Ching, D. Ewing, A. Jain, 2019, Experimental Thermal and Fluid Science.

Time evolution of surface roughness in pipes due to mass transfer under different Reynolds numbers

C. Ching, D. Ewing, D. Wang, 2016 .

Mass transfer in S-shape dual pipe bends under annular two phase flow conditions

J. Cotton, H. Mazhar, C. Ching, 2014 .

Numerical simulations of mass transfer in turbulent pipe flow at high schmidt numbers

C. Ching, D. Ewing, D. Wang, 2023, Heat and Mass Transfer.

Effect of bend separation distance on the mass transfer in back-to-back pipe bends arranged in a 180° configuration

X. Chen, C. Ching, D. Ewing, 2016 .

R. Moser, W. George, D. Ewing, 2007, Journal of Fluid Mechanics.

Robert D. Moser, Michael M. Rogers, R. Moser, 1998, Journal of Fluid Mechanics.

R. Moser, W. George, D. Ewing, 1995 .

Spatial resolution of parallel hot-wire probes for derivative measurements

W. George, H. Hussein, D. Ewing, 1995 .

Spectral Linear Stochastic Estimation of the Turbulent Velocity in a Square Three-Dimensional Wall Jet

D. Ewing, Joseph W. Hall, J. Hall, 2010 .

Two-point similarity in the round jet

Jerry Westerweel, Bettina Frohnapfel, William K. George, 2007, Journal of Fluid Mechanics.

The effect of cross flow on one-dimensional spectra measured using hot wires

D. Ewing, 2004 .

The effect of cross-flow velocity on mean-square derivatives measured using hot wires

W. George, D. Ewing, 2000 .

A Combined Spatial and Temporal Decomposition of the Coherent Structures in the Three-Dimensional Wall Jet

D. Ewing, J. Hall, 2006 .

Decay of Round Turbulent Jets with Swirl

D. Ewing, 1999 .

Heat transfer in the evaporator section of moderate-speed rotating heat pipes

C. Ching, D. Ewing, Chan Y. Ching, 2008 .

Experimental investigation on the heat transfer characteristics of axial rotating heat pipes

C. Ching, D. Ewing, Chan Y. Ching, 2004 .

Mitigation of the Diesel Soot Deposition Effect on the Exhaust Gas Recirculation (EGR) Cooling Devices for Diesel Engines

Jen-Shih Chang, J. S. Cotton, Jen-Shih Chang, 2005 .

Development of a non-destructive neutron radiography technique to measure the three-dimensional soot deposition profiles in diesel engine exhaust systems

Jen-Shih Chang, J. Cotton, D. Ewing, 2004 .

Characterization of the Soot Deposition Profiles in Diesel Engine Exhaust Gas Recirculation (EGR) Cooling Devices Using a Digital Neutron Radiography Imaging Technique

Jen-Shih Chang, James S. Cotton, Jen-Shih Chang, 2004 .

A study on thermal performance of revolving heat pipe grinding wheel

Yucan Fu, C. Ching, D. Ewing, 2021 .

Heat transfer to impinging round jets with triangular tabs

Nan Gao, D. Ewing, Dan Ewing, 2003 .

Examination of a LSE/POD complementary technique using single and multi-time information in the axisymmetric shear layer

Joseph H. Citriniti, D. Ewing, Dan Ewing, 1999 .

Fluid flow and heat transfer model for high-speed rotating heat pipes

C. Ching, D. Ewing, Chan Y. Ching, 2003 .

Fluid flow and heat transfer modeling in rotating heat pipes

C. Ching, D. Ewing, F. Song, 2002 .

The Rectangular Wall Jet - Part II: Role of the Large-Scale Structures

D. Ewing, J. Hall, 2005 .

Characterization of a thermoelectric cooler based thermal management system under different operating conditions

Dan Ewing, Chan Y. Ching, M. K. Russel, 2013 .

Characterization of evaporator and condenser thermal resistances of a screen mesh wicked heat pipe

Anthony J. Robinson, R. Kempers, A. Robinson, 2008 .

MEASUREMENT OF PERIODIC FLOW USING MICRO PARTICLE IM- AGE VELOCIMETRY WITH PHASE SAMPLING TECHNIQUE

P. Selvaganapathy, Wen-I Wu, C. Ching, 2010 .

Plasma Suppression of Diesel Soot Deposition During Diesel Engine Operations

J. Cotton, G. Harvel, D. Ewing, 2009 .

Heat Transfer Performance in a Vertical Grooved Thermosyphon

C. Ching, D. Ewing, A. Zaghlol, 2021, International Journal of Thermofluids.

Neutron Radiography Study of Diesel Engine Exhaust Soot Depositions in a Exhaust Pipe With and Without Water Coolant

Jen-Shih Chang, J. Cotton, D. Ewing, 2009 .

Evolution of the Large-Scale Structures in the ‘Far-Field’ of Turbulent Shear Flows

D. Ewing, 2001 .

Comparison of the effect of soot deposition on the flow and thermal characteristics of finned-plate-type and shell-and-tube-type exhaust gas recirculation cooling devices

J. Chang, J. Cotton, D. Ewing, 2009 .

Experimental investigation of planar offset attaching jets with small offset distances

Nan Gao, D. Ewing, Dan Ewing, 2007 .

The transient response of wicked heat pipes with non-condensable gas

C. Ching, D. Ewing, Chan Y. Ching, 2012 .

Effect of bend separation distance on the mass transfer in back-to-back pipe bends arranged in a 180° configuration

Xi Chen, C. Ching, D. Ewing, 2016, Heat and Mass Transfer.

Electrical effect of soot depositions in a co-axial wire pipe flow

Jen-Shih Chang, J. Cotton, D. Ewing, 2009 .

Environmentally friendly machining with a revolving heat pipe grinding wheel

Jiajia Chen, Houfa Shen, Dan Ewing, 2016 .

Investigation of a large top wall temperature on the natural convection plume along a heated vertical wall in a square cavity

C. Ching, D. Ewing, Chan Y. Ching, 2008 .