D. Yin

发表

Applicability of Mg‐Zn‐(Y, Gd) Alloys for Engine Pistons

Qudong Wang, M. Sasaki, K. Okamoto, 2011 .

The intrinsic effect of long period stacking ordered phases on mechanical properties in Mg-RE based alloys

G. Zhu, D. Qiu, Mingxing Zhang, 2016 .

Creep behavior of Mg–9Gd–1Y–0.5Zr (wt.%) alloy piston by squeeze casting

Qudong Wang, B. Ye, D. Yin, 2013 .

Anomalous Tension Twinning Activity in Extruded Mg Sheet During Hard-Orientation Loading at Room Temperature

C. Boehlert, D. Yin, Y. Chai, 2021, Metallurgical and Materials Transactions A.

The impression creep behavior and microstructure evolution of cast and cast-then-extruded Mg–10Gd–3Y–0.5Zr (wt%)

Qudong Wang, W. Ding, C. Boehlert, 2016 .

Copper Cathode’s Ablated Structure Operated in a 50 Megawatt Arc Heater

Yuan Liu, T. Zhu, D. Yin, 2019, Journal of Thermophysics and Heat Transfer.

Extra Strain Hardening in High Pressure Die Casting Mg-Al-RE Alloy

Qudong Wang, W. Ding, Jie Wei, 2020, Metallurgical and Materials Transactions A.

Quantitative Investigation on the Slip/Twinning Activity and Cracking Behavior During Low-Cycle Fatigue of an Extruded Mg-3Y Sheet

D. Yin, J. Zheng, Y. Deng, 2020, Metallurgical and Materials Transactions A.

The deformation modes and transferability during low-cycle fatigue of Mg and Mg–3Y alloy

D. Yin, Jinsong Rao, Jiang Zheng, 2022, Materials Science and Engineering: A.

A statistical analysis of compressive deformation mechanisms in an extruded Mg–3Y sheet

Qudong Wang, D. Yin, Jiang Zheng, 2021 .

Effects of precipitate on the slip activity and plastic heterogeneity of Mg-11Y-5Gd-2Zn-0.5Zr (wt. %) during room temperature compression

Qudong Wang, L. Long, D. Yin, 2021 .

Effect of Y content and equal channel angular pressing on the microstructure, texture and mechanical property of extruded Mg-Y alloys

W. Yang, G. Quan, D. Yin, 2020 .

Effects of semisolid treatment and ECAP on the microstructure and mechanical properties of Mg-6.52Zn-0.95Y alloy with icosahedral phase

Y.B. Zhang, D. Yin, B. Ji, 2019, Materials Science and Engineering: A.

Effect of dislocation configuration on Ag segregation in subgrain boundary of a Mg-Ag alloy

Xuefei Chen, Lirong Xiao, Yuntian Zhu, 2021 .

Achieving advanced elevated-temperature strength by tailoring precipitates in Mg-Sn-Y alloys

Ying Zeng, Xiaoying Qian, K. Sun, 2022, Journal of Alloys and Compounds.

Modification of Eutectic Si in Al-Si-(Ba) Alloy by Inducing a Novel 9R Structure in Twins

Xuefei Chen, Lirong Xiao, Hao Zhou, 2018, Materials.

Grain size effect on tensile properties and slip systems of pure magnesium

Yang Cao, Lirong Xiao, Yuntian Zhu, 2021 .

Tension-compression asymmetry and the underlying slip/twinning activity in extruded Mg–Y sheets

C. Boehlert, D. Yin, J. Zheng, 2021 .

Tensile creep behavior and microstructure evolution of extruded Mg–10Gd–3Y–0.5Zr (wt%) alloy

Qudong Wang, B. Ye, D. Yin, 2013 .

Creep and Fracture Behavior of Peak-Aged Mg-11Y-5Gd-2Zn-0.5Zr (wt pct)

Qudong Wang, C. Boehlert, D. Yin, 2012, Metallurgical and Materials Transactions A.

Effects of heat treatments on microstructure and mechanical properties of Mg–11Y–5Gd–2Zn–0.5Zr (wt.%) alloy

Qudong Wang, D. Yin, Changjiang Chen, 2011 .

Analysis of Slip Activity and Deformation Modes in Tension and Tension-Creep Tests of Cast Mg-10Gd-3Y-0.5Zr (Wt Pct) at Elevated Temperatures Using In Situ SEM Experiments

Qudong Wang, W. Ding, C. Boehlert, 2016, Metallurgical and Materials Transactions A.

Thermal properties of Mg–11Y–5Gd–2Zn–0.5Zr (wt.%) alloy

Qudong Wang, D. Yin, Changjiang Chen, 2009 .

Microstructure refinement of Mg-Al-RE alloy by Gd addition

Qudong Wang, W. Ding, Jie Wei, 2019, Materials Letters.

The Ductility Variation of High-Pressure Die-Cast AE44 Alloy: The Role of Inhomogeneous Microstructure

Hao Zhou, D. Yin, Jiang Zheng, 2021, Metallurgical and Materials Transactions A.

Creep behavior of Mg–11Y–5Gd–2Zn–0.5Zr (wt.%) at 573K

Qudong Wang, W. Ding, C. Boehlert, 2012 .

The elevated-temperature mechanical behavior of peak-aged Mg–10Gd–3Y–0.4Zr Alloy

Qudong Wang, C. Boehlert, D. Yin, 2011 .

Quantitative Analysis of the Deformation Modes and Cracking Modes During Low-Cycle Fatigue of a Rolled Az31b Magnesium Alloy: The Influence of Texture

D. Yin, Jinsong Rao, Haoge Shou, 2022, SSRN Electronic Journal.

Anisotropic cyclic deformation behavior of an extruded Mg-3Y alloy sheet with rare earth texture

D. Yin, Jinsong Rao, Jiang Zheng, 2022, Journal of Magnesium and Alloys.

Effects of ECAP and Annealing Treatment on the Microstructure and Mechanical Properties of Mg-1Y (wt. %) Binary Alloy

Qudong Wang, Jie Wei, Hao Zhou, 2017 .

Microstructure, texture and mechanical properties evolution of extruded fine-grained Mg-Y sheets during annealing

Qudong Wang, Hao Zhou, Ying Zeng, 2018 .

High-ductility fine-grained Mg-1.92Zn-0.34Y alloy fabricated by semisolid and then hot extrusion

Yingbo Zhang, D. Yin, Y. Zhuang, 2021, Journal of Magnesium and Alloys.

Effects of Y on the Deformation Mechanisms of Extruded Mg-Y Sheets During Room-Temperature Compression

D. Yin, B. Ji, H. Zhou, 2020, Metallurgical and Materials Transactions A.

In-Situ Study of the Tensile Deformation and Fracture Modes in Peak-Aged Cast Mg-11Y-5Gd-2Zn-0.5Zr (Weight Percent)

Qudong Wang, C. Boehlert, R. Mishra, 2016, Metallurgical and Materials Transactions A.

Effect of heat treatment and pre-deformation on damping capacity of cast Mg-Y binary alloys

G. Quan, D. Yin, Yi Xu, 2017 .

Effects of Y content and temperature on the damping capacity of extruded Mg-Y sheets

W. Yang, Y.B. Zhang, D. Yin, 2019, Journal of Magnesium and Alloys.

Comparison of microstructure in Mg–10Y–5Gd–0.5Zr and Mg–10Y–5Gd–2Zn–0.5Zr alloys by conventional casting

Qudong Wang, Yan Gao, D. Yin, 2009 .

The effect of grain size on deformation modes and deformation heterogeneity in a rolled Mg-Zn-Ca alloy

D. Yin, Jiang Zheng, Haoge Shou, 2022, Journal of Materials Research and Technology.

Quantitative study on slip/twinning activity and theoretical critical shear strength of Mg alloy with Y addition

B. Jiang, Ying Zeng, K. Sun, 2020 .

In-situ analysis of the tensile deformation modes and anisotropy of extruded Mg-10Gd-3Y-0.5Zr (wt.%) at elevated temperatures

W. Ding, C. Boehlert, D. Yin, 2016 .

Atomic structure of γ″ phase in Mg–Gd–Y–Ag alloy induced by Ag addition

Xuefei Chen, Lirong Xiao, G. Cheng, 2019, Philosophical Magazine.

Plastic anisotropy and deformation behavior of extruded Mg-Y sheets at elevated temperatures

Qudong Wang, Hao Zhou, Ying Zeng, 2017 .

Achieving Improved/Reversed Tension–Compression Asymmetry by Tailoring Extrusion Processing for Mg–Sn(–Y) Alloy

Ying Zeng, Xiaoying Qian, D. Yin, 2022, Metals and Materials International.

In-situ analysis of the slip activity during tensile deformation of cast and extruded Mg-10Gd-3Y-0.5Zr (wt.%) at 250 °C

W. Ding, C. Boehlert, D. Yin, 2016 .

Tensile and compressive creep behavior of extruded Mg-10Gd-3Y-0.5Zr (wt.%) alloy

C. Boehlert, D. Yin, Jie Yuan, 2015 .

Influence of Thermal and Thermo-Mechanical Processing on the Creep Resistance of Mg-10Gd-3Y-0,4Zr Alloy

Qudong Wang, W. Ding, D. Yin, 2011 .

Tensile and compressive deformation behavior of peak-aged cast Mg–11Y–5Gd–2Zn–0.5Zr (wt%) alloy at elevated temperatures

G. Quan, D. Yin, L. Ren, 2016, Journal of Materials Science.

Elevated-temperature impact toughness of Mg-(Gd, Y)-Zr alloy

Qudong Wang, D. Yin, Y. Mu, 2013 .

Investigation on Slip Activity and Plastic Heterogeneity of Aged Mg–10Y Sheets During Compression

W. Yang, D. Yin, J. Zheng, 2021, Metallurgical and Materials Transactions A.

Modification of eutectic Si and the microstructure in an Al-7Si alloy with barium addition

Jin Zhang, Ruxue Liu, D. Yin, 2018 .

Unexpected high-temperature brittleness of a Mg-Gd-Y-Ag alloy

Hao Zhou, Xuefei Chen, Yi Liu, 2021, Journal of Magnesium and Alloys.

Atomic-scale three-dimensional structural characterisation of twin interface in Mg alloys

Xuefei Chen, Lirong Xiao, Hao Zhou, 2020 .

Creep and rupture behavior of peak-aged Mg-11 Y-5 Gd-2 Zn-0 . 5 Zr ( wt . % )

C. Boehlert, D. Yin, Q. D. Wang, 2012 .

Creep and fracture behavior of as-cast Mg–11Y–5Gd–2Zn–0.5Zr (wt%)

W. Ding, C. Boehlert, D. Yin, 2012, Journal of Materials Science.

Antioxidant Properties of Deer Blood Hydrolysate and the Possible Mode of Action

D. Yin, L. Zhong, Shuai Wang, 2013 .

Microstructural evolution and mechanical properties of Mg-9.8Gd-2.7Y-0.4Zr alloy produced by repetitive upsetting

Hao Zhou, Qudong Wang, X.L. Ma, 2018, Journal of Materials Science & Technology.

Experimental Study on the Elastic–plastic Transitions of the Hetero-structured High Pressure Die Casting Mg–Al-RE Alloy

W. Ding, D. Yin, Q. D. Wang, 2021, Experimental Mechanics.

Forgeability and die-forging forming of direct chill casting Mg–Nd–Zn–Zr magnesium alloy

W. Ding, Li Jin, Jie Dong, 2010 .

Dry sliding wear behaviour of Mg–10Gd–3Y–0.4Zr alloy

Qudong Wang, W. Ding, D. Yin, 2012 .