J. An

发表

The microstructure and mechanical properties of Mg-3Al-3RE alloys

Limin Wang, Z. Cao, Y. Liu, 2008 .

Microstructure and Elevated Temperature Properties of Die-cast AZ91-xNd Magnesium Alloys

Limin Wang, Jun Wang, Yong-bing Liu, 2008, Journal of Materials Engineering and Performance.

Effect of Graphite Particle Size on Wear Property of Graphite and Al2O3 Reinforced AZ91D-0.8%Ce Composites

Yong-bing Liu, J. An, Xiao-hong Yang, 2008 .

Evolution of the microstructure and hardness of a rapidly solidified/melt-spun AZ91 alloy upon aging at different temperatures

Z. Cao, Yong-bing Liu, J. An, 2009 .

Morphological evolutions of cast and melt-spun Mg97Zn1Y2 alloys during deformation and heat-treating

Z. Cao, Rongrong Li, Yong-bing Liu, 2008 .

Morphologies of Microstructure in Mg97Zn1Y2 Ribbon upon Ageing at Different Temperatures

Z. Cao, Yong-bing Liu, J. An, 2008 .

Self-assembly of ABA triblock copolymers under soft confinement

Yutian Zhu, J. An, Yuping Sheng, 2015 .

Multicompartment nanoparticles from the self-assembly of mixtures of ABC and AC block copolymers in C-selective solvents

Yutian Zhu, Nan Yan, J. An, 2014 .

Friction-wear characteristics of carbon fiber reinforced friction material

Hengguo Wang, J. An, Q. Guan, 2004 .

Mechanism of bonding of Al–Pb alloy strip and hot dip aluminised steel sheet by hot rolling

Y. Liu, J. An, D. Sun, 2001 .

Ni–Zn binary system hydroxide, oxide and sulfide materials: synthesis and high supercapacitor performance

J. Lian, J. An, Xiaobing Wang, 2015 .

Role of RE Element Nd on Boronizing Kinetics of Steels

J. An, S. J. Sun, Y. L. Yang, 2012, Journal of Materials Engineering and Performance.

Surface modification of steels and magnesium alloy by high current pulsed electron beam

C. Dong, Q. Guan, B. Gao, 2005 .

Mild wear and severe wear behavior of Ti-6Al-4V alloy at low, intermediate and high sliding speeds

J. An, Hongfei Duan, Zhilei Yu, 2021, Surface Topography: Metrology and Properties.

Sliding Wear Map for AZ31 Magnesium Alloy

J. An, C. Liang, Chuang Li, 2014 .

Improvement of mechanical properties of stainless maraging steel laser weldments by post-weld ageing treatments

J. An, You Lu, Xiaoxi Gao, 2012 .

Dry Sliding Wear Behavior and a Proposed Criterion for Mild to Severe Wear Transition of Mg–3Al–0.4Si–0.1Zn Alloy

X. Niu, J. An, W. Sun, 2017, Tribology Letters.

Effects of Loading and Sliding Speed on the Dry Sliding Wear Behavior of Mg-3Al-0.4Si Magnesium Alloy

X. Niu, J. An, W. Sun, 2017 .

Microstructure and tribological properties of Al–Pb alloy modified by high current pulsed electron beam

Y. Liu, J. An, Yukun Lu, 2006 .

Tribological Behavior and the Mild–Severe Wear Transition of Mg97Zn1Y2 Alloy with a LPSO Structure Phase

Wei Sun, Liang Li, J. An, 2018, Materials.

Effect of Rolling Temperature on the Microstructures and Mechanical Properties of Mg97Zn1Y2 Magnesium Alloy

J. An, Z. Su, Yang Lu, 2010 .

Microstructure and Mechanical Properties of ZTA Ceramic-Lined Composite Pipe Prepared by Centrifugal-SHS

J. Zhao, J. An, Z. Wen, 2015 .

High-Performance Ceramic-Lined Composite Pipes with ZrO2 Additive Prepared by Centrifugal-SHS Process

J. An, Z. Wen, C. Liang, 2016 .

Dry sliding wear behavior of magnesium alloys

Xiaobo Chen, Limin Wang, Y. Lu, 2008 .

Tribological Characteristics of Mg–3Al–0.4Si–0.1Zn Alloy at Elevated Temperatures of 50–200 °C

J. An, Y. X. Zhang, X. Lv, 2018, Tribology Letters.

Electrochemical Behaviors of Die-Cast Mg-4Al-0.4Mn-Xpr (x=0, 1, 4) Alloys in NaCl Solution

Wei Sun, J. Meng, Xiaodong Niu, 2013 .

Comparative studies on the microstructure evolution and fracture behavior between hot-rolled and as-cast Mg96ZnY3 alloys

Z. Cao, Yao-hui Liu, J. An, 2009 .

Comparative studies on wear behaviour between as cast AZ91 and Mg97Zn1Y2 magnesium alloys

Z. Guo, Xiaobo Chen, Y. Liu, 2007 .

Tensile properties of hot rolled Mg 97Zn 1Y 2 alloy sheets at elevated temperatures

X. Niu, J. An, Guangyu Li, 2010 .

Investigation of temperature-induced wear transition of an Mg-10Gd-1.4Y-0.4Zr alloy under non-lubricated sliding conditions

Yuan-Hang Sun, J. An, Zhihui Liu, 2020, Materials Research Express.

Elevated-Temperature Wear Characteristics and Mild-Severe Wear Transition in the Mg–10.1Gd–1.4Y–0.4Zr Alloy

J. An, W. Zhao, C. Feng, 2019, Journal of Tribology.

Wear mechanism map of uncoated HSS tools during drilling die-cast magnesium alloy

Limin Wang, Y. Liu, Junyan Wang, 2008 .

Tribological and structural properties of lubricating films of Al–4Si–20Pb alloy during dry sliding at different temperatures

Y. Lu, J. An, S. Hao, 2005 .

The influence of Pb on the friction and wear behavior of Al–Si–Pb alloys

Y. Lu, J. An, Yunxian Liu, 2004 .

Effect of Sn on the microstructure and compressive deformation behavior of the AZ91D aging alloy

Z. Cao, W. Qi, Y. Liu, 2008 .

Dry sliding wear behavior of hot extruded Al-Si-Pb alloys in the temperature range 25-200 °C

C. Dong, Y. Lu, J. An, 2004 .

Effect of Si on the interfacial bonding strength of Al–Pb alloy strips and hot-dip aluminized steel sheets by hot rolling

Bai Yang, Yang Liu, J. An, 2002 .

Hot roll bonding of Al-Pb-bearing alloy strips and steel sheets using an aluminized interlayer

J. An, You Lu, D. Sun, 2001 .

Tribological Behavior of Mg97Zn1Y2 Alloy at Elevated Temperatures of 50-200 °C

J. An, X. Yan, R. Li, 2017, Journal of Materials Engineering and Performance.

Comparative Studies on Friction and Wear Performance between Glass-fiber Reinforced Polyamide 66 Composite and Ductile Irons on Ceramic Al2O3 Counterface in Sucker Rod Centralizer Application

X. Xu, J. An, Z. Su, 2010 .

Friction and wear characteristics of Mg–11Y–2·5Zn magnesium alloy treated by laser surface melting

J. An, Yang Lu, R. Li, 2010 .

Corrosion characteristics of boronized AISI 8620 steel in oil field water containing H2S

J. An, S. J. Sun, X. Gao, 2012, Protection of Metals and Physical Chemistry of Surfaces.

Tensile Properties of Boronized N80 Steel Tube Cooled by Different Methods

Z. G. Wang, J. An, S. J. Sun, 2009 .

Fabrication of the supersaturated solid solution of carbon in copper by mechanical alloying

Z. Cao, X. Ran, J. An, 2007 .

Hot-roll bonding of Al-Pb bearing alloy strips and hot dip aluminized steel sheets

B. Yang, Y. Liu, J. An, 2001 .

A Ni1−xZnxS/Ni foam composite electrode with multi-layers: one-step synthesis and high supercapacitor performance

J. Lian, J. An, Xiaobing Wang, 2016 .

Ni Foam-Ni3 S2 @Ni(OH)2 -Graphene Sandwich Structure Electrode Materials: Facile Synthesis and High Supercapacitor Performance.

J. Lian, J. An, Xiaobing Wang, 2017, Chemistry.

Improvement of the wear behavior of stircast Al–Si–Pb alloys by hot extrusion

C. Dong, J. An, Q. Zhang, 2003 .

Surface Oxidation Behavior and Wear Performance of a Fe-21.3Cr-3.5Al-0.5Ti-0.4Zr Steel

J. An, Zhihui Liu, Yiguang Chen, 2020, Metals.

Influence of high current pulsed electron beam treatment on the tribological properties of Al–Si–Pb alloy

J. An, X. Shen, Cong Chen, 2006 .

Correlation between test temperature, applied load and wear transition of Mg97Zn1Y2 alloy

J. An, C. Feng, Y. Tian, 2020 .

Dry Sliding Wear Behavior and Mild–Severe Wear Transition of Mg97Zn1Y2 Alloy at Elevated Temperatures

C. Liang, Liang Li, J. An, 2018, Materials.

Dry Sliding Wear Behavior and Subsurface Microstructure Evolution of Mg97Zn1Y2 Alloy in a Wide Sliding Speed Range

J. Zhao, C. Liang, J. An, 2016, Journal of Materials Engineering and Performance.

A Novel Method of Evaluating the Mild to Severe Wear Transition Loads for Magnesium Alloys

C. Liang, J. An, M. Yin, 2015, Journal of Materials Engineering and Performance.

Correlation between friction-induced microstructural evolution, strain hardening in subsurface and tribological properties of AZ31 magnesium alloy

C. Li, J. An, C. Liang, 2014 .

Masking Effect of LPSO Structure Phase on Wear Transition in Mg97Zn1Y2 Alloy

Fujun Tao, J. An, Lijun Zhao, 2021, Metals.

An Investigation on Transition Between Mild and Severe Wear in Mg–5Al–0.8Zn Magnesium Alloy Using Recrystallization Kinetics Modeling

J. An, C. Liang, M. Yin, 2015 .

An Investigation on Subsurface Microstructural Evolution and Mild to Severe Wear Transition in AZ51 Magnesium Alloy

J. An, M. Yin, T. F. Su, 2015 .

Roles of Friction-Induced Strain Hardening and Recrystallization in Dry Sliding Wear of AZ31 Magnesium Alloy

C. Liang, J. An, X. Lv, 2015, Transactions of the Indian Institute of Metals.

Friction and wear characteristics of hot-extruded leaded aluminum bearing alloys

Y. Liu, J. An, J. Wang, 2002 .

Intermediate-Temperature Oxidation of Fe-Cr-Ni-Mo Stainless Maraging Steel in Air

J. An, J. Guan, X. Lv, 2013 .

Microstructure and mechanical properties of stainless maraging steel laser weldments after ageing at different temperatures

J. An, You Lu, Z. Wen, 2013 .

Two Types of Wear Mechanisms Governing Transition between Mild and Severe Wear in Ti-6Al-4V Alloy during Dry Sliding at Temperatures of 20–250 °C

J. An, Wenbin Zhang, Danhu Du, 2022, Materials.

Study of boronizing of steel AISI 8620 for sucker rods

C. Li, J. An, S. J. Sun, 2012, Metal Science and Heat Treatment.

Mechanical properties, wear, and corrosion of boronized N80 tube steel

X. Xu, J. An, Z. Su, 2012, Materials Science.

Investigation on Boronizing of N80 Tube Steel

X. Tian, J. An, You Lu, 2009 .

Dry wear characteristics of TC21 titanium alloy at elevated temperatures

J. An, Haixin Chen, Shigang Zhang, 2023, Materials Research Express.

Catalysis of Rare Earth Element Nd on Boriding of AISI 1045 Steel

C. Liang, J. An, Xiao Yang, 2011 .

Dry Sliding Wear Behavior and Mild–Severe Wear Transition of Mg97Zn1Y2 Alloy at Elevated Temperatures

C. Liang, Liang Li, J. An, 2018, Materials.