Xiangfa Liu

发表

Duplex nucleation in Mg–Al–Zn–Mn alloys with carbon inoculation

G. Han, Xiangfa Liu, 2009 .

Effect of Ni on eutectic structural evolution in hypereutectic Al–Mg2Si cast alloys

Xiangfa Liu, Chong Li, Yaping Wu, 2010 .

Microstructure Evolution and Mechanical Properties of Al-TiB2/TiC In Situ Aluminum-Based Composites during Accumulative Roll Bonding (ARB) Process

Yang Cao, Yuntian Zhu, Yusheng Li, 2017, Materials.

Controlled synthesis of different morphologies of TiB2 microcrystals by aluminum melt reaction method

Pengting Li, Xiangfa Liu, Yuying Wu, 2013 .

Preferred orientation and interfacial structure in extruded nano-Al3BC/6061 Al

Houwen Chen, Xiangfa Liu, Yongfeng Zhao, 2017 .

Enhanced aging kinetic of Al3BC/6061 Al composites and its micro-mechanism

Houwen Chen, Xiangfa Liu, Yongfeng Zhao, 2017 .

Growth kinetics of primary Si particles in hypereutectic Al-Si alloys under the influence of P inoculation: Experiments and modelling

R. Mathiesen, Yanjun Li, D. Casari, 2021 .

Investigation of the microstructures and mechanical properties of the Al–xSi–yAlNp composite by a diffusion method

Xiangfa Liu, J. Nie, Xia Ma, 2020, Materials Science and Engineering: A.

In situ synthesizing SiC particles and its strengthening effect on an Al–Si–Cu–Ni–Mg piston alloy

Tong Gao, Xiaofan Du, Xiaofan Du, 2017 .

In-situ synthesis of nano SiC particles in Al–Si–C system at 750 °C

Liang Jiang, Xiangfa Liu, J. Nie, 2021, Journal of Materials Research and Technology.

Synthesis and Growth of 6H-SiC and 3C-SiC in an Al–Si–C System at 820 °C: Effect of the Reaction Path on the SiC Polytype

Xiangfa Liu, J. Nie, Tong Gao, 2020 .

Synthesis of a (ZrAl3+AlN)/Al composite and the influence of particles content and element Cu on the microstructure and mechanical properties

Xiangfa Liu, Kaixuan Zhao, Tong Gao, 2019, Journal of Alloys and Compounds.

Influence of trace Zr on the microstructure and elevated temperature properties of an Al–Si–Cu–Ni–Mg piston alloy

S. Ringer, Xiangfa Liu, Guiliang Liu, 2019, Materials Research Express.

Dispersing nano–AlN particles cluster by designing Al–Si–AlN/Mg diffusion couples and the preparation of AlN/Mg–Al composite

Xiangfa Liu, Kaiqi Hu, Tong Gao, 2019, Materials Science and Engineering: A.

In-situ SiC reinforced Si-SiC 3D skeletons in SiC/Al-Si composites

Xiangfa Liu, Tong Gao, Chongchong Wu, 2019, Journal of Alloys and Compounds.

A novel heat-resistant Al–Si–Cu–Ni–Mg base material synergistically strengthened by Ni-rich intermetallics and nano-AlNp microskeletons

Qianqian Sun, Xiangfa Liu, Xia Ma, 2019, Journal of Materials Science & Technology.

Synthesizing (ZrAl3 + AlN)/Mg–Al composites by a ‘matrix exchange’ method

Xiangfa Liu, Kaiqi Hu, Tong Gao, 2018, Results in Physics.

A novel method of coating ex-situ SiC particles with in-situ SiC interlayer in Al-Si-C alloy

Qianqian Sun, Xiaofan Du, Xiangfa Liu, 2018, Journal of Alloys and Compounds.

Role of Si in the evolution process of Zr–rich intermetallics in Mg melt

Xiangfa Liu, Tong Gao, Zengqiang Li, 2017 .

Effect of co-addition of RE, Fe and Mn on the microstructure and performance of A390 alloy

Xiangfa Liu, Yuying Wu, Z. Qian, 2009 .

Quantitative comparison of three Ni-containing phases to the elevated-temperature properties of Al-Si piston alloys

Xiangfa Liu, Yuying Wu, Yang Yang, 2010 .

Evolution of nickel-rich phases in Al–Si–Cu–Ni–Mg piston alloys with different Cu additions

Xiangfa Liu, Yang Yang, Yunguo Li, 2012 .

Influence of carbon source on the microstructure of Al–Ti–C master alloy and its grain refining efficiency

Pengting Li, Xiangfa Liu, J. Nie, 2013 .

Morphological evolution of ZrAlSi phase and its impact on the elevated-temperature properties of Al–Si piston alloy

Qianqian Sun, Xiangzhen Zhu, Xiangfa Liu, 2013 .

A novel approach to synthesize SiC particles by in situ reaction in Al–Si–C alloys

Xiaofan Du, Xiangfa Liu, Yuying Wu, 2014 .

Phase transformation mechanism of Al4C3 by the diffusion of Si and a novel method for in situ synthesis of SiC particles in Al melt

Xiaofan Du, Xiangfa Liu, Tong Gao, 2016 .

Revealing hetero-deformation induced (HDI) stress strengthening effect in laminated Al-(TiB2+TiC)p/6063 composites prepared by accumulative roll bonding

Yuyao Chen, F. Wang, Yonghao Zhao, 2020 .

Simultaneously improving the tensile strength and ductility of the AlNp/ Al composites by the particle's hierarchical structure with bimodal distribution and nano-network

Yusheng Li, Yong Zhang, Yonghao Zhao, 2020 .

Study on spheroidization and the growth mechanism of eutectic boron in Cu–B alloys

Guodong Zhang, Xiangfa Liu, Yuying Wu, 2020 .

Superhard Copper Matrix Composite Reinforced by Ultrafine Boron for Wear-Resistant Bearings

Xiangfa Liu, Yuying Wu, Shuo Zhao, 2018, ACS Applied Nano Materials.

A simple method to prepare boron spheres in Cu alloy

Houwen Chen, Xiangfa Liu, Yuying Wu, 2017 .

Phase Evolution of β-Al5FeSi During Recycling of Al–Si–Fe Alloys by Mg Melt

J. Qin, Xiangfa Liu, Tong Gao, 2018, International Journal of Metals.

Preparation of a novel Mg–Fe master alloy and its spheroidizing effect on graphite in ductile irons

Xiangfa Liu, Tong Gao, Zengqiang Li, 2018, Results in Physics.

Evolution of Fe–rich phases in Mg melt and a novel method for separating Al and Fe from Al–Si–Fe alloys

J. Qin, Xiangfa Liu, Tong Gao, 2017 .

Enhanced mechanical properties of a novel heat resistant Al-based composite reinforced by the combination of nano-aluminides and submicron TiN particles

Xiangfa Liu, Kaixuan Zhao, J. Nie, 2020 .

First-principle study of the AlP/Si interfacial adhesion

Jing Du, Xiangfa Liu, C. Peng, 2010 .

Revealing the Relationship Between AlN Architectures and the Strengthening Mechanism of the AlN/Al Composites at 350 °C

Xiangfa Liu, Kaixuan Zhao, Yongfeng Zhao, 2022, Journal of Materials Engineering and Performance.

Ab initio insight into graphene nanofibers to destabilize hydrazine borane for hydrogen release

R. Ahuja, O. Srivastava, Xiangfa Liu, 2017 .

Towards Large‐Scale Fabrication of Self‐Healable Functional Hydrogel Coatings for Anti‐Fog/Frost Surfaces and Flexible Sensors

Chuanzhen Huang, Xiubing Liang, Hanlian Liu, 2021 .

Fabrication of hypoeutectic Al-4Si alloy with high electrical conductivity, high plasticity and medium strength by the dual treatment of Al matrix and eutectic Si microstructure

Xiangfa Liu, H. Cui, Xiaoli Cui, 2021 .

Influence mechanisms of Cu or Fe on the microstructures and tensile properties at 350 °C of network AlNp reinforced Al composites

Houwen Chen, Xiangfa Liu, Yongfeng Zhao, 2018 .

The dispersive orientated-precipitation of AlP on alumina film and its effect on the primary Si gathering behavior in the Al–Si alloy surface layer

Pengting Li, H. Qiao, Xiangzhen Zhu, 2014 .

In-situ synthesis of SiC particles by the structural evolution of TiCx in Al–Si melt

Xiangfa Liu, J. Nie, Dakui Li, 2014 .

The nucleation sites of primary Si in Al–Si alloys after addition of boron and phosphorus

X. Bian, Xiangfa Liu, Yuying Wu, 2005 .

Synthesis of Boron Nanosheets in Copper Medium

Xiangfa Liu, Yuying Wu, Shuo Zhao, 2019, Scientific Reports.

Evolution of amorphous boron transformed into crystal nanospheres under electron beam irradiation

Xiangfa Liu, Yuying Wu, Chongchong Wu, 2020 .

Growth mechanisms of fiber-like and dendrite-like boron in a Cu melt

Xiangfa Liu, Yuying Wu, Shuo Zhao, 2018 .

Growth mechanisms of alpha-boron and beta-boron in a copper melt at ambient pressure and its stabilities

Guojun Zhang, Xiangfa Liu, Yuying Wu, 2017 .

Unique defect evolution during the plastic deformation of a metal matrix composite

X. Liao, Yang Cao, X. An, 2019, Scripta Materialia.

Study of the surface segregation of carbon vacancies in TiCx

H. Ding, Xiangfa Liu, J. Nie, 2012 .

The response of room temperature and high temperature tensile properties to the microstructure variation of an AlN + Si3N4/Al composite by heat treatment

Xiangfa Liu, Xia Ma, Kaiqi Hu, 2018, Materials Science and Engineering: A.

Study on the evolution processes from TiCx to TiB2 induced by B in Al melt

Yonghao Zhao, Xiangfa Liu, J. Nie, 2015 .

Morphological evolution of TiC from octahedron to cube induced by elemental nickel

Pengting Li, Xiangfa Liu, Hui Li, 2012 .

In-Situ Synthesis and Chemical Bonding of the Al-Doped ß-Sic Particles in Al-Si-C Light Alloys

Xiaofan Du, Xiangfa Liu, Zhao Qian, 2022, SSRN Electronic Journal.

Four-branched compounds coupled Si and iron-rich intermetallics in near eutectic Al–Si alloys

X. Bian, Xiangfa Liu, Yuying Wu, 2007 .

Morphologically templated nucleation of primary Si on AlP in hypereutectic Al-Si alloys

S. Ji, Xiangzhen Zhu, Shihao Wang, 2022 .

Morphologies and growth mechanisms of α-Al(FeMn)Si in Al–Si–Fe–Mn alloy

Xiangfa Liu, Chong Li, Yuying Wu, 2013 .

Influence of Si on stability of TiC in Al melts

H. Ding, Xiangfa Liu, 2011 .

Enhanced age-hardening response of Al–4Mg–1Cu (wt.%) microalloyed with Ag and Si

S. Ringer, N. Birbilis, J. H. Xia, 2013 .

Generalized fragility of eutectic Al–Si alloys modified with phosphorus

X. Bian, Xiangfa Liu, J. Zhang, 2009 .

Fabrication of titanium diboride–carbon core–shell structure particles and their application as high-efficiency grain refiners of wrought aluminum alloys

H. Ding, Xiangfa Liu, Yuying Wu, 2013 .

First-principles study of hydrogen storage in non-stoichiometric TiCx

H. Ding, Xiangfa Liu, Xiaoliang Fan, 2013 .

Microstructure and grain refining performance of melt-spun Al–5Ti–1B master alloy

Zhonghua Zhang, X. Bian, Y. Wang, 2003 .

Revealing the Relationship Between AlN Architectures and the Strengthening Mechanism of the AlN/Al Composites at 350 °C

Xiangfa Liu, Kaixuan Zhao, Yongfeng Zhao, 2022, Journal of Materials Engineering and Performance.

Supportive strengthening role of Cr-rich phase on Al–Si multicomponent piston alloy at elevated temperature

Xiangfa Liu, Yuying Wu, Yang Yang, 2011 .

Simultaneously improving strength and ductility for Al–Cu–Mg alloy via threadiness array of TiC nanoparticles

Houwen Chen, Xiangfa Liu, J. Nie, 2019, Materialia.

Microstructure and mechanical properties at both room and high temperature of in-situ TiC reinforced Al–4.5Cu matrix nanocomposite

Xiangfa Liu, Yuying Wu, J. Nie, 2018, Journal of Alloys and Compounds.

Influence of trace boron on the morphology of titanium carbide in an Al–Ti–C–B master alloy

Xiaoguang Ma, Xiaoguang Ma, Xiangfa Liu, 2010 .

Absorbing formation mechanism of AlP on TiB2 substrate and their application as high-efficiency nucleating agent in Al-45Si alloy

Yifan Li, Xiangfa Liu, Hui Li, 2017 .

Stiff, strong and ductile heterostructured aluminum composites reinforced with oriented nanoplatelets

Yuyao Chen, Yuntian Zhu, Yonghao Zhao, 2020 .

The growth behavior of Al2Cu phase in confined spaces constituted by γ–Al2O3 particle clusters

Lingyu Liu, Xiangfa Liu, Shushuai Liu, 2021 .

Synthesis of a novel Zn–7Fe–3P master alloy and its modifying performance on primary Si in A390 alloy

Lingyu Liu, Xiangfa Liu, Kaixuan Zhao, 2021 .

Modification of primary and eutectic phases in Al-33.2Cu and Al-20Mg2Si alloys by nano-treating

Lingyu Liu, Xiangfa Liu, Kaixuan Zhao, 2021 .

Improving the high-temperature ductility of Al composites by tailoring the nanoparticle network

Yang Cao, Yuntian Zhu, Hao Zhou, 2020 .

Design of an in–situ multi–scale particles reinforced (Al2O3+ZrB2+AlN)/Al composite with high strength, elasticity modulus and thermal stability

Xiangfa Liu, Yingying Ren, Xia Ma, 2020 .

High-temperature mechanical properties of 2024 Al matrix nanocomposite reinforced by TiC network architecture

Xiangfa Liu, Z. You, S. Tian, 2019, Materials Science and Engineering: A.

Unveiling the Semicoherent Interface with Definite Orientation Relationships between Reinforcements and Matrix in Novel Al3BC/Al Composites.

Houwen Chen, Xiangfa Liu, Yuying Wu, 2016, ACS applied materials & interfaces.

Interface precipitation and corrosion mechanisms in a model Al–Zn–Mg–Cu alloy strengthened by TiC particles

Xiangfa Liu, Kaixuan Zhao, J. Nie, 2022, Corrosion Science.

The research of Ti-rich zone on the interface between TiCx and aluminum melt and the formation of Ti3Al in rapid solidified Al–Ti–C master alloys

Xiaoguang Ma, Xiangfa Liu, K. Jiang, 2009 .

Ti transition zone on the interface between TiC and aluminum melt and its influence on melt viscosity

Xiangfa Liu, Lina Yu, 2007 .

The relationship between viscosity and refinement efficiency of pure aluminum by Al–Ti–B refiner

Xiangfa Liu, Lina Yu, 2006 .

Heterogeneous nucleating role of TiB2 or AlP/TiB2 coupled compounds on primary Mg2Si in Al–Mg–Si alloys

Guohua Zhang, Xiangfa Liu, Chong Li, 2008 .

Thermodynamic evaluation of Al–Mg2Si with addition of Ni

Xiangfa Liu, Chong Li, Yuying Wu, 2012 .

Microstructural formation in hypereutectic Al–Mg2Si with extra Si

Xiangfa Liu, Chong Li, Hui Li, 2009 .

Refinement and modification performance of Al–P master alloy on primary Mg2Si in Al–Mg–Si alloys

Xiangfa Liu, Chong Li, Yuying Wu, 2008 .

Influence of the evolution of heat-resistant phases on elevated-temperature strengthening mechanism and deformation behavior in Al–Si multicomponent alloys

Xiangfa Liu, Yuying Wu, Kaixuan Zhao, 2022, Current Applied Physics.

Evolution and Strengthening Effects of the Heat-Resistant Phases in Al–Si Piston Alloys with Different Fe/Ni Ratios

Qianqian Sun, Fanchao Meng, Xiangfa Liu, 2019, Materials.

Effects of trace Mn addition on the elevated temperature tensile strength and microstructure of a low-iron Al–Si piston alloy

Guohua Zhang, Xiangfa Liu, Z. Qian, 2008 .

EPMA analysis of calcium-rich compounds in near eutectic Al–Si alloys

X. Bian, Xiangfa Liu, Yuying Wu, 2005 .

Duplex Nucleation and Its Effect on the Grain Size and Properties of Near Eutectic Al-Si Alloys

Xiangfa Liu, Yuying Wu, Wenbo Li, 2022, Materials.

Design and fabrication of a (6.4γ–Al2O3 + 18Al13Fe4)/Al (wt.%) composite utilizing fine grain strengthening and dispersion strengthening at elevated temperatures

Lingyu Liu, Xiangfa Liu, Kaixuan Zhao, 2022, Materials & Design.

Investigation on AlP as the heterogeneous nucleus of Mg 2 Si in Al–Mg 2 Si alloys by experimental observation and first-principles calculation

Huijun Li, Yongchang Liu, Liming Yu, 2018 .

Corrosion behavior of Al–Mg2Si alloys with/without addition of Al–P master alloy

Huijun Li, Yongchang Liu, Zhiming Gao, 2015 .

Effects of individual and combined additions of phosphorus, boron and cerium on primary and eutectic silicon in an Al-30Si alloy

Xiangfa Liu, H. Dai, 2009 .

Effect of AlB2 on the P-threshold in Al-Si alloy

Xiangfa Liu, Yuying Wu, 2018, Results in Physics.

Increasing the ductility of heat-resistant AlNp/Al composites by submicron Al2O3 particles

Xiangfa Liu, J. Nie, Xia Ma, 2020 .

Corrosion behavior of NdFeB sintered magnets in HNO3–HF acid mixture solution

S. Gong, Changzheng Wang, Xiangfa Liu, 2015 .

Effects of processing parameters on the refinement of primary Si in A390 alloys with a new Al–Si–P master alloy

Qianqian Sun, Xiangfa Liu, M. Zuo, 2009, Journal of Materials Science.

Tunable negative permittivity behavior and conductor–insulator transition in dual composites prepared by selective reduction reaction

S. Dou, Zhicheng Shi, Zidong Zhang, 2013 .

Synthesis and characterization of an in-situ Al2O3/Al–Cu composite with a heterogeneous structure

Lingyu Liu, Xiangfa Liu, Guiliang Liu, 2021, Journal of Alloys and Compounds.

Different evolution behaviors of NAl4 and PAl4 clusters in liquid Al-N and Al-P alloys

J. Qin, Xiangfa Liu, Xia Ma, 2021 .

The effect of melting temperature and time on the TiC particles

Xiangfa Liu, K. Jiang, 2009 .

Study of preparation of TiB2 by TiC in Al melts

H. Ding, Xiangfa Liu, J. Nie, 2012 .

Strengthening behavior of B doped TiC particles on an Al–Zn–Mg alloy

Xiangfa Liu, Kaixuan Zhao, J. Nie, 2021 .

A New Kind of Al-5Ti-0.3C Master Alloy and Its Refining Performance on 6063 Alloy

Xiangfa Liu, J. Nie, Tao Wang, 2015 .

Grain refinement limit and mechanical properties of 6063 alloy inoculated by Al–Ti–C (B) master alloys

Tong Gao, Enzhao Wang, Xiangfa Liu, 2014 .

Reaction in the Al-ZrO2-C system

Xiangfa Liu, Zhenqing Wang, 2005 .

Reaction mechanism in an Al-TiO2-C system for producing in situ Al/(TiC + Al2O3) composite

X. Bian, Junyan Zhang, Xiangfa Liu, 2004 .

Strengthening behavior of nano–particle networks in an in–situ synthesized (α–Al2O3 + ZrB2)/Al composite

Xiangfa Liu, Tong Gao, Yihan Bian, 2021 .

Liquid–solid reaction mechanism in Al–ZrO2(–B2O3) system and the preparation of (α–Al2O3+ZrB2/ZrAl3)/Al composites

Lingyu Liu, Xiangfa Liu, Guiliang Liu, 2020 .

Preparation and properties of porous silicon nitride ceramics with polymethyl methacrylate as pore-forming agent

Haoming Wu, Xin Cheng, Hailin Yang, 2020 .

Compositions and morphologies of TiAlSi intermetallics in different diffusion couples

Xiangfa Liu, Guiliang Liu, Tong Gao, 2014 .

Influence of Si and Ti contents on the microstructure, microhardness and performance of TiAlSi intermetallics in Al–Si–Ti alloys

Pengting Li, Xiangfa Liu, Tong Gao, 2011 .

Reactive synthesis of hexagonal Ti5P3.16 crystals and their heterogenous nucleating mechanism on primary Si

F. Wang, Yusheng Li, Yonghao Zhao, 2019, Journal of Alloys and Compounds.

The influences of B dopant on the crystal structure and nucleation ability of TiCx in the Al melt

Xiangfa Liu, Yuying Wu, J. Nie, 2013 .

Microstructure and corrosion behavior of Al-TiB2/TiC composites processed by hot rolling

Yuyao Chen, F. Wang, Yonghao Zhao, 2019, Results in Physics.

Study of the reaction mechanism in the Al-C binary system through DSC and XRD

X. Bian, Junyan Zhang, Xiangfa Liu, 2004 .

A united refinement technology for commercial pure Al by Al–10Ti and Al–Ti–C master alloys

H. Ding, Xiaoguang Ma, Xiangfa Liu, 2009 .

The influence of forming processes on the distribution and morphologies of TiC in Al–Ti–C master alloys

Guoqun Zhao, H. Ding, Xiangfa Liu, 2007 .

A novel Core-shell TiCx particle by modifying TiCx with B element and the preparation of the (TiCx+AlN)/Al composite

Xiangfa Liu, J. Nie, Lei Ren, 2021, Journal of Alloys and Compounds.

Grain Refinement of AZ31 Magnesium Alloy by New Al-Ti-C Master Alloys

H. Ding, G. Han, Xiangfa Liu, 2009 .

Enhanced grain refinement and mechanical properties of a high–strength Al–Zn–Mg–Cu–Zr alloy induced by TiC nano–particles

Qianqian Sun, Xiangfa Liu, Kaixuan Zhao, 2021 .

Influence of nitrogen on the synthesis and nucleation ability of TiCx in Al–Ti–C master alloy

Ping Zhang, Xiangfa Liu, J. Nie, 2014 .

Influence of a new kind of Al–Ti–C master alloy on the microstructure and mechanical properties of Al–5Cu alloy

Ping Zhang, Xiangfa Liu, J. Nie, 2014 .

In situ TiB2 particulate reinforced near eutectic Al–Si alloy composites

Xiangfa Liu, Yanfeng Han, X. Bian, 2002 .

High energy milling method to prepare Al/WC composite coatings in Al–Si alloys

Xiangfa Liu, Chong Li, Yuying Wu, 2010 .

Morphological evolutions and growth patterns of Zr-containing phases in aluminum alloys

Xiong-Ying Li, Xiangfa Liu, Xiaoli Cui, 2014 .

The influence of carbon vacancies on the stacking fault energy of TiC

Xin-chun Zhang, H. Ding, Xiangfa Liu, 2014 .

The in-situ synthesis and strengthening mechanism of the multi-scale SiC particles in Al-Si-C alloys

Xiaofan Du, Xiangfa Liu, Yuying Wu, 2018, Journal of Alloys and Compounds.

Effects of copper addition on the in-situ synthesis of SiC particles in Al–Si–C–Cu system

Xiaofan Du, Xiangfa Liu, Yuying Wu, 2014 .

Enhanced age-hardening behavior in Al–Cu alloys induced by in-situ synthesized TiC nanoparticles

Xiangfa Liu, J. Nie, Huaning Zhang, 2019, Journal of Materials Science & Technology.

Strength adjust mechanism of high toughness Al4C3/Al-xMg composites

Xiangfa Liu, Guiliang Liu, Kaiqi Hu, 2021 .

Microstructural formation in a hypereutectic Mg–Si alloy

Xiangfa Liu, Huabing Yang, Yichuan Pan, 2005 .

Microstructure and Mechanical Properties of an AlN/Mg–Al Composite Synthesized by Al–AlN Master Alloy

Xiangfa Liu, Tong Gao, Qingfei Xu, 2018, International Journal of Metalcasting.

Effect of Boron on aging strengthened phase and properties of Cu-Cr-Zr alloy

Xiangfa Liu, Yuying Wu, S. Liu, 2022, Journal of Materials Research and Technology.

Nucleating role of an effective in situ Mg3P2 on Mg2Si in Mg–Al–Si alloys

Xiangfa Liu, Chong Li, Jing Hou, 2011 .

Microstructures and grain refinement performance of rapidly solidified Al–Ti–C master alloys

Zhonghua Zhang, X. Bian, Y. Wang, 2002 .

Complex modification effect by ZrAlSi intermetallic and element Sr on the microstructure and mechanical properties of hypereutectic Al–Si alloys

Xiangfa Liu, Tong Gao, Yongrui Zhang, 2014 .

The combined effect of titanic carbide and aluminum phosphide on the refinement of primary silicon in Al-50Si alloy

Xiangfa Liu, H. Dai, 2008 .

The synergistic effect of Al–B–C master alloy to improve conductivity and strength of 1070 alloy

Xiangfa Liu, Xiaoli Cui, Z. Qian, 2015 .

Unveiling the deformation behavior and strengthening mechanisms of Al3BC/Al composites via in-situ micropillar compression

N. Chawla, Qingdong Zhang, Xiangfa Liu, 2020 .

Mechanical properties of Al3BC by nanoindentation and micropillar compression

N. Chawla, Xiangfa Liu, Yongfeng Zhao, 2020 .

Micromechanical properties and deformation behavior of Al3BC/6061 Al composites via micropillar compression

N. Chawla, Qingdong Zhang, Xiangfa Liu, 2020, Materials Science and Engineering: A.

Identification of novel dual-scale Al3BC particles in Al based composites

Xiangfa Liu, Z. Qian, Yongfeng Zhao, 2016 .

Morphology stability of Al3BC phase in aluminum alloys

Pengting Li, Xiangfa Liu, Wenjie Tian, 2014 .

Transformation from Al3BC phase to doped TiB2 or TiC particles in Al–Ti melts

Pengting Li, Xiangfa Liu, J. Nie, 2013 .

Assessment of AlN/Mg–8Al Composites Reinforced with In Situ and/or Ex Situ AlN Particles

Xiangfa Liu, Kaiqi Hu, Tong Gao, 2020, Materials.

Influence of trace Ti on the microstructure, age hardening behavior and mechanical properties of an Al–Zn–Mg–Cu–Zr alloy

Xiangfa Liu, Tong Gao, Yongrui Zhang, 2014 .

Influence of a new AlTiC–B master alloy on the casting and extruding behaviors of 7050 alloys

Qianqian Sun, Xiangfa Liu, Kaixuan Zhao, 2020 .

Microstructure evolution and high temperature tensile properties of AlNp/Al–Fe composites induced by microalloying

Xiangfa Liu, Yongfeng Zhao, Xia Ma, 2019, Journal of Alloys and Compounds.

Key roles of particles in grain refinement and material strengthening for an aluminum matrix composite

X. Liao, X. An, Yuntian Zhu, 2021 .

Different elements-induced destabilisation of TiC and its application on the grain refinement of Mg–Al alloys

H. Ding, Xiangfa Liu, Hui Li, 2009 .

Influence of zirconium on grain refining efficiency of Al–Ti–C master alloys

H. Ding, Xiangfa Liu, Lina Yu, 2007 .

Grain refinement of A356 alloy by Al–Ti–B–C master alloy and its effect on mechanical properties

Pengting Li, Xiangfa Liu, Lili Zhang, 2013 .

Synthesis of an Al-Based Composite Reinforced by Multi-Phase ZrB2, Al3BC and Al2O3 with Good Mechanical and Thermal Properties at Elevated Temperature

Xiangfa Liu, Yongfeng Zhao, Guiliang Liu, 2020, Materials.

In–situ synthesis of an Al composite reinforced with multi–scale Al12Mo, (Al, Zr, Si) and Al2O3 particles through a multi–stage reaction

Qianqian Sun, Xiangfa Liu, Xia Ma, 2019, Materials Science and Engineering: A.

Chatter stability and surface quality in milling of unidirectional carbon fiber reinforced polymer

Chuanzhen Huang, Hanlian Liu, Xiangfa Liu, 2021 .

A novel (AlN + Si3N4)/Al composite with well-balanced strength and ductility

Xiangfa Liu, Xia Ma, Kaiqi Hu, 2018 .

Grain refining potency of LaB6 on aluminum alloy

Pengting Li, Xiangfa Liu, Dong Wang, 2012 .

Influence of heterogeneous microstructure on the tensile properties of (Al2O3+AlB2)/Al composites

Xiangfa Liu, Yuying Wu, Kaixuan Zhao, 2022, Composites Communications.

Distribution of TiB2 particles and its effect on the mechanical properties of A390 alloy

Pengting Li, Xiangfa Liu, Yuying Wu, 2012 .

Replacement with Each Other of Ti and Zr in the Intermetallics of Al–(Si–)Ti–Zr Alloys

Xiangfa Liu, Tong Gao, 2013 .

Precipitation behaviors of cubic and tetragonal Zr–rich phase in Al–(Si–)Zr alloys

A. Ceguerra, A. Breen, S. Ringer, 2016 .

Phase control and formation mechanism of Al–Mn(–Fe) intermetallic particles in Mg–Al-based alloys with FeCl3 addition or melt superheating

G. Han, Xiangfa Liu, 2016 .

Microstructure and refining performance of an Al-5Ti-0.25C refiner before and after equal-channel angular pressing

I. Kim, Yoshimi Watanabe, X. Bian, 2005 .

Evolution of a novel Si-18Mn-16Ti-11P alloy in Al-Si melt and its influence on microstructure and properties of high-Si Al-Si alloy

Xiangzhen Zhu, Xiangfa Liu, Yuying Wu, 2016 .

Theoretical prediction of a novel aluminum nitride nanostructure: Atomistic exposure

R. Ahuja, Hu Li, Xiangfa Liu, 2019 .

Microstructure evolution and enhanced mechanical properties in Al-Mn alloy reinforced by B-doped TiC particles

Dongqing Zhang, Xiangfa Liu, K. Zhao, 2022, Materials & Design.

A high strength AlSi10Mg alloy fabricated by laser powder bed fusion with addition of Al Ti C B master alloy powders

Xiebin Wang, Jiangwei Liu, Jie Sun, 2021 .

Reaction mechanism in the ball-milled Al—Ti—C powders

X. Bian, Junyan Zhang, Xiangfa Liu, 2003 .

Microstructural Characterization and Mechanical Properties of VB2/A390 Composite Alloy

Xiangfa Liu, Xiaoli Cui, Yuying Wu, 2015 .

In situ CrB2 and its effect on the mechanical properties of A390 alloy

Xiangfa Liu, Xiaoli Cui, Chong Li, 2013 .

Microstructure and enhanced cryogenic tensile property of a heterostructured Al-AlN/Al-Mg composite fabricated by accumulative roll bonding (ARB)

Yuyao Chen, Yonghao Zhao, Xiangfa Liu, 2022, Journal of Materials Research and Technology.

Influence of forming process on three-dimensional morphology of TiB2 particles in Al-Ti-B alloys

Pengting Li, Xiangfa Liu, J. Nie, 2012 .

Mechanisms on the outstanding high temperature plasticity of AlNp/Al–0.4Cu composites induced by cryogenic treatment

Houwen Chen, Xiangfa Liu, Yongfeng Zhao, 2019, Journal of Alloys and Compounds.

Microstructure evolution, mechanical properties and strengthening mechanisms in the hot extruded Si3N4 particle reinforced Al–Cu–Mg composite

Xirui Yan, Xiangfa Liu, K. Zhao, 2022, Materials Science and Engineering: A.

Instability of TiC and TiAl3 compounds in Al-10Mg and Al-5Cu alloys by addition of Al-Ti-C master alloy

Xiangfa Liu, Lina Yu, Zhenqing Wang, 2006 .

The enhanced superplasticity of a 2024 matrix nanocomposite reinforced by TiC particles

Xiangfa Liu, Kaixuan Zhao, J. Nie, 2020 .

Fabrication and Properties of In Situ B13P2 Reinforced Cu-Based Composites

Xiangfa Liu, Xiaoli Cui, Yu Ying Wu, 2017 .

Synchronous improvement of electrical and mechanical performance of A356 alloy reinforced by boron coupling nano-AlNp

Xiangfa Liu, Mengjie Wang, Guiliang Liu, 2020 .

Effects of grain refinement and boron treatment on electrical conductivity and mechanical properties of AA1070 aluminum

Guojun Zhang, Xiangfa Liu, Xiaoli Cui, 2015 .

Influences of Fe, Si and homogenization on electrical conductivity and mechanical properties of dilute Al–Mg–Si alloy

Xiangfa Liu, Xiaoli Cui, Yuying Wu, 2016 .

Effect of existing form of alloying elements on the microhardness of Al–Si–Cu–Ni–Mg piston alloy

Xiangfa Liu, Yang Yang, Yunguo Li, 2011 .

The study of refinement for primary silicon in Cu-50wt.%Si alloys

X. Bian, Xiangfa Liu, Yuying Wu, 2007 .

A new technique to modify hypereutectic Al–24%Si alloys by a Si–P master alloy

Xiangfa Liu, Yaping Wu, Hui Li, 2009 .

Morphological transformation mechanism of eutectic Si phases in Al–Si alloys by nano-AlNp

Xiangfa Liu, Yuying Wu, Z. Qian, 2018, Journal of Alloys and Compounds.

Evolution, microhardness of ZrAlSi intermetallic and its impact on the elevated-temperature properties in Al–Si alloys

Xiangfa Liu, Tong Gao, Dakui Li, 2012 .

Grain refinement of A356 alloy by AlTiC/AlTiB master alloys

X. Bian, Xiangfa Liu, Lina Yu, 2005 .

A new nucleation mechanism of primary Si by peritectic-like coupling of AlP and TiB2 in near eutectic Al–Si alloy

H. Ding, X. Bian, Xiangfa Liu, 2007 .

The grain refinement performance of B-doped TiC on Zr-containing Al alloys

Guojun Zhang, Xiangfa Liu, Z. Qian, 2018 .

Microstructure and grain refining performance of a new Al–Ti–C–B master alloy

H. Ding, Xiaoguang Ma, Xiangfa Liu, 2009 .

A new Al–Fe–P master alloy designed for application in low pressure casting and its refinement performance on primary Si in A390 alloy at low temperature

Tong Gao, Xiangzhen Zhu, H. Qiao, 2014 .

The phase transition of ZrP induced by Si in Al–Si melts

Xiangfa Liu, J. Nie, Dakui Li, 2012 .

The improvement of microstructures and mechanical properties of near eutectic Al–Si multicomponent alloy by an Al–8Zr–2P master alloy

Xiangfa Liu, Yunguo Li, Dakui Li, 2012 .

Refinement of Hypereutectic Al–Si Alloy by a New Al–Sc–P Master Alloy

Xiangfa Liu, M. Zuo, 2011, Journal of Inorganic and Organometallic Polymers and Materials.

Refinement of hypereutectic Al–Si alloy by a new Al–Zr–P master alloy

Xiangfa Liu, K. Jiang, M. Zuo, 2010 .

Re-formation of AlP compound in Al―Si melt

Xiangfa Liu, H. Dai, Qian Zhang, 2009 .

A new nucleation mechanism of primary Si by like-peritectic coupling of AlP and Al4C3 in near eutectic Al–Si alloy

H. Ding, X. Bian, Xiangfa Liu, 2007 .

Microstructure and mechanical properties of Al-TiB2/TiC in situ composites improved via hot rolling

Fang Wang, Yusheng Li, Yonghao Zhao, 2017 .

Growth of single crystalline boron nanotubes in a Cu alloy

Na Wang, Hui Li, Xiufang Bian, 2017 .

Grain refinement of Mg–Al alloys with Al4C3–SiC/Al master alloy

Xiangfa Liu, Yan-hui Liu, B. Xiufang, 2004 .

The contribution of aluminides to strength of Al–Mg2Si–Cu–Ni alloys at room and elevated temperatures

Yongchang Liu, Liming Yu, Su-Hyeon Kim, 2021 .

Structural and morphological evolution of Fe–rich phases in Al–xMg–6Si–4Fe alloys

Xiangfa Liu, Kaixuan Zhao, Kaiqi Hu, 2019, Results in Materials.

In-situ formation of Al-CaB6 composites with low resistivity

Xiangzhen Zhu, Xiangfa Liu, Xiaoli Cui, 2012, Rare Metals.

Improvement of high-temperature strength of 6061 Al matrix composite reinforced by dual-phased nano-AlN and submicron-Al2O3 particles

Xiangfa Liu, J. Nie, Xia Ma, 2022, Transactions of Nonferrous Metals Society of China.

Surface modification of A390 alloy with CaB6 composite coating

Xiangfa Liu, H. Cui, Xiaoli Cui, 2020 .

Effect of B/C ratio on the microstructure and grain refining efficiency of Al–Ti–C–B master alloy

Pengting Li, Xiaoguang Ma, Xiangfa Liu, 2011 .

Grain refinement of A 356 alloy by Al – Ti – B – C master alloy and its effect on mechanical properties

Pengting Li, Xiangfa Liu, Lili Zhang, 2013 .

The good grain refining performance of a new kind of Al-Ti-C-B master alloy

H. Ding, Xiaoguang Ma, Xiangfa Liu, 2012 .

A New Grain Refining Technique for Pure Al by Addition of Molten AlTiB Master Alloys

X. Bian, Xiangfa Liu, Jiaji Ma, 2000 .

TEM observations of a rapidly solidified Al–Ti–C alloy

Zhonghua Zhang, X. Bian, Y. Wang, 2003 .

Temperature Effect of Refining Performance by Al-Ti-B (C) Master Alloys

H. Ding, Xiangfa Liu, C. Gao, 2011 .

Revealing the roles of Al4C3 and Al8Mn5 during α-Mg nucleation in Mg-Al based alloys

Xiangzhen Zhu, Xiangfa Liu, Tong Gao, 2017 .

The grain refinement efficiency of Ni–C on Mg–Al alloys

H. Ding, Xiangfa Liu, 2009 .

Effect of Al-5Ti-0.25C-0.25B and Al-5Ti-1B Master Alloys on the Microstructure and Mechanical Properties of Al-9.5Si-1.5Cu-0.8Mn-0.6Mg Alloy

Xiangfa Liu, Yuying Wu, Tong Gao, 2023, Materials.

In situ formation of superhard Cu–B based composite by reducing reaction

K. Lű, Xiangfa Liu, Chong Li, 2012 .

In situ formation of nano-scale Cu–Cu2O composites

J. Qin, Xiangfa Liu, Chong Li, 2010 .

In-situ preparation of Al matrix composites reinforced by TiB2 particles and sub-micron ZrB2

X. Bian, Xiangfa Liu, De-Ming Zhao, 2005 .

Influence of Deformation on the Microstructure and Low-temperature Refining Behavior of Al-3.5P Master Alloy

H. Qiao, Xiangzhen Zhu, Xiangfa Liu, 2015 .

Effect of Strontium Modification on Hydrogen Content and Porosity Shape of Al-Si Alloys

X. Bian, Xiangfa Liu, Z. Zhang, 2000 .

Refinement performance and mechanism of an Al-50Si alloy

Xiangfa Liu, H. Dai, 2008 .

The investigation of continuous nucleation and refinement of primary Si in Al–30Si mushy zone

Xiangfa Liu, Dakui Li, M. Zuo, 2010 .

The improvement of electrical conductivity of hypoeutectic Al-Si alloys achieved by composite melt treatment

Xiangfa Liu, H. Cui, Xiaoli Cui, 2019, Journal of Alloys and Compounds.

The improvement of boron treatment efficiency and electrical conductivity of AA1070Al achieved by trace Ti assistant

Guojun Zhang, Xiangfa Liu, H. Cui, 2018 .

Study on the improvement of electrical conductivity and mechanical properties of low alloying electrical aluminum alloys

Yibo Liu, Guojun Zhang, Xiangfa Liu, 2017 .

Optimizing microstructures of dilute Al–Fe–Si alloys designed with enhanced electrical conductivity and tensile strength

Xiangfa Liu, Xiaoli Cui, Yuying Wu, 2015 .

Revealing heterogeneous nucleation of primary Si and eutectic Si by AlP in hypereutectic Al-Si alloys

Q. Ramasse, Jiehua Li, P. Schumacher, 2016, Scientific Reports.

Revealing the correlation of microstructure configuration and mechanical properties of Al–Si–Mg alloy reinforced by C-doped TiB2 and SiC

Xiangfa Liu, K. Zhao, Guiliang Liu, 2023, Materials & Design.

Morphological evolution and strengthening behavior of α-Al(Fe,Mn)Si in Al–6Si–2Fe–xMn alloys

Xiangfa Liu, Ban-chao Zhang, Kaiqi Hu, 2017 .

Effect of Mg on age hardening and precipitation behavior of an AlSiCuMg cast alloy

X. Bian, Junyan Zhang, Xiangfa Liu, 2004 .

Eutectic nucleation in Al-25wt.%Si alloy through DSC

Chuanzhen Huang, Xiangfa Liu, Yuying Wu, 2010 .

Microstructures and modification performance of melt-spun Al-10 Sr alloy

Zhonghua Zhang, X. Bian, Y. Wang, 2002 .

Annealing-induced microstructural evolution in melt-spun Al-10% Sr alloy

Zhonghua Zhang, X. Bian, Junyan Zhang, 2002 .

Effect of K/Na on microstructure of high-speed steel used for rolls

X. Bian, Xiangfa Liu, Huabing Yang, 2004 .

Generation and evolution of nanoscale AlP and Al13Fe4 particles in Al-Fe-P system

H. Qiao, Xiangzhen Zhu, Xiangfa Liu, 2015 .

Refining and nucleating behaviors of AlP on primary phase in Al–Ge and Al–Ge–Si alloys

Xiangzhen Zhu, Xiangfa Liu, Tong Gao, 2015 .

Influence of Ge content on the microstructure, phase formation and microhardness of hypereutectic Al–Si alloys

Xiangfa Liu, Tong Gao, Yongrui Zhang, 2014 .

Series of Al–P Master Alloy and Excellent Refining Performance on Hypereutectic A390 Alloys

Xiangfa Liu, M. Zuo, 2011 .

The featured local structural units in liquid Al80Si15P5 alloy and their relationship with Si modification

T. Gu, J. Qin, Xiangfa Liu, 2010 .

Al-Si-P master alloy and its modification and refinement performance on Al-Si alloys

Xiangfa Liu, H. Dai, M. Zuo, 2009 .

Effect of AlP on the eutectic nucleation in Ni–38 wt.%Si alloys

X. Bian, Xiangfa Liu, Yuying Wu, 2006 .

The structure and transport property of liquid Al with different EAM model

Yanning Zhang, Xiangfa Liu, Li Wang, 2004 .

Pressure effect on the structural transition of liquid Au

Yanning Zhang, Xiangfa Liu, Weimin Wang, 2004 .

Preparation of Iron Networks Hosted in Porous Alumina with Tunable Negative Permittivity and Permeability

Xihua Zhang, Zhicheng Shi, Kai Sun, 2013 .

Experimental realization of simultaneous negative permittivity and permeability in Ag/Y3Fe5O12 random composites

Xihua Zhang, Zhicheng Shi, Kai Sun, 2013 .

Effect of defects on adsorption characteristics of AlN monolayer towards SO2 and NO2: Ab initio exposure

R. Ahuja, Xiaopeng Hao, Xiangfa Liu, 2018, Applied Surface Science.

First-principles investigation of CO adsorption on pristine, C-doped and N-vacancy defected hexagonal AlN nanosheets

R. Ahuja, Xiangfa Liu, Z. Qian, 2018 .

Effect of manganese on the microstructure of Mg–3Al alloy

G. Han, Xiangfa Liu, Guolong Ma, 2009 .

The molecular dynamics simulation of structure and transport properties of sheared super-cooled liquid metal

X. Bian, Yanning Zhang, Xiangfa Liu, 2003 .

Effect of strontium addition on hydrogen content and porosity shape of Al-Si alloys

X. Bian, Xiangfa Liu, Z. Zhang, 2001 .

Grain refining potency of LaB 6 on aluminum alloy

Pengting Li, Xiangfa Liu, Dong Wang, 2016 .

Exploring pristine and Li-doped Mg2NiH4 compounds with potential lithium-storage properties: Ab initio insight

R. Ahuja, M. Bououdina, Xiangfa Liu, 2018 .

Effect of Mn on growth mechanism and morphology evolution of CrB2 in Al melt

Xiangfa Liu, Xiaoli Cui, Yuying Wu, 2019, Materials Letters.

A New Measure to Enhance the Heat-Resistant (4tic + 5aln)/Al Composite by Multi-Scale Fe/Mn Enrichment Effect

Lei Ren, Xiangfa Liu, Qianqian Sun, 2023, SSRN Electronic Journal.

A new synergy to overcome the strength-ductility trade-off dilemma in Al–Si–Cu alloy by micro-nano-particle complex clusters

Xirui Yan, Xiangfa Liu, Ziyuan Zhao, 2023, Materials & Design.

Revealing the ultra-high high-temperature compressive mechanical properties and deformation mechanism of a heterostructured AlNp/Al nanocomposite

Meng Jiang, Yuyao Chen, Yonghao Zhao, 2023, Materials Science and Engineering: A.

On the Nano–treating Effect of Al2O3 on the Eutectic Si in Al–Si Alloy

Xiangfa Liu, Yuying Wu, Tong Gao, 2023, Micron.

Design of Al based composites reinforced with in–situ Al2O3, AlB2 and Al13Fe4 particles

Lingyu Liu, Xiangfa Liu, Yuying Wu, 2023, Composites Communications.

3D grain structure of an extruded 6061 Al alloy by lab-scale X-ray diffraction contrast tomography (DCT)

N. Chawla, Xiangfa Liu, Yongfeng Zhao, 2020 .

Neutron-Absorption Properties of B/Cu Composites

Xiangfa Liu, Yuying Wu, Shuo Zhao, 2023, Materials.

Structural Evolution of AlN Nanoclusters and the Elemental Chemisorption Characteristics: Atomistic Insight

R. Ahuja, Hu Li, Zhansheng Lu, 2019, Nanomaterials.

A novel Zn-Cu-P master alloy and its modification performance on primary Si of A390 alloy

Xiangfa Liu, Tong Gao, Yihan Bian, 2019, Results in Physics.

The evolution mechanism of boron nanoparticles from sphere into petal-like morphologies in copper melts

Yifan Li, Houwen Chen, Xiangfa Liu, 2017 .

An anti Si/Zr-poisoning strategy of Al grain refinement by the evolving effect of doped complex

Xirui Yan, Xiangfa Liu, J. Nie, 2023, Acta Materialia.

The novel eutectic microstructures of Si–Mn–P ternary alloy

Xiangfa Liu, Yaping Wu, 2010 .

Preparation of an Al–Sr Master Alloy by Molten Salts Electrolysis

X. Bian, Xiangfa Liu, Z. Zhang, 2001 .

Effects of controlling grain growth mode on microstructures and properties of Cu foil

Xiangfa Liu, Yuying Wu, Shushuai Liu, 2023, Journal of Materials Research and Technology.

A Novel Al-Cu Composite with Ultra-High Strength at 350 °C via Dual-Phase Particle Reinforced Submicron-Structure.

Ge Wu, Xiangfa Liu, J. Nie, 2023, Advanced science.

Relationship of Ca, B, and AlP in Al–12.6Si alloy

K. Lű, Xiangfa Liu, Xiaoli Cui, 2013, Rare Metals.

Revisiting Mg-Mg2Ni System from Electronic Perspective

R. Ahuja, Weimin Guo, Xiangfa Liu, 2017 .

How Can We Overcome the Strength–Ductility Tradeoff in Light Alloys and Related Composites?

Xiangfa Liu, Tong Gao, 2023, Materials.

Relationship between microstructures and contents of Ca/P in near-eutectic Al–Si piston alloys

X. Bian, Xiangfa Liu, J. Qiao, 2005 .

Evolution Behavior of γ-Al3.5FeSi in Mg Melt and a Separation Method of Fe from Al–Si–Fe Alloys

Xiangfa Liu, Tong Gao, Zengqiang Li, 2018, Acta Metallurgica Sinica (English Letters).

Segregation Behavior and Evolution Mechanism of Iron-Rich Phases in Molten Magnesium Alloys

Xiangfa Liu, Li Wencheng, Yaoxian Zhang, 2016 .