Xiaoshi Hu

发表

Graphene nanoplatelets reinforced Mg matrix composite with enhanced mechanical properties by structure construction

Xiaojun Wang, Kun Wu, Linglong Meng, 2018, Materials Science and Engineering: A.

Simultaneously enhanced mechanical properties and electromagnetic interference shielding performance of a graphene nanosheets (GNSs) reinforced magnesium matrix composite by GNSs induced laminated structure

Xiaojun Wang, Xiaoshi Hu, Hailong Shi, 2021, Journal of Alloys and Compounds.

Synergistic Strengthening of Mechanical Properties and Electromagnetic Interference Shielding Performance of Carbon Nanotubes (CNTs) Reinforced Magnesium Matrix Composites by CNTs Induced Laminated Structure

Xiaojun Wang, Xiaoshi Hu, Hailong Shi, 2021, Materials.

Investigation into the influence of carbon nanotubes addition on residual stresses and mechanical properties in the CNTs@SiCp/Mg-6Zn hybrid composite using neutron diffraction method

Xiaojun Wang, W. Gan, Kun Wu, 2020 .

Recycling of AZ91 Mg alloy through consolidation of machined chips by extrusion and ECAP

Kun Wu, Kun Wu, M. Zheng, 2010 .

Microstructure and mechanical properties of SiCp/AZ91 composite deformed through a combination of forging and extrusion process

Xiaojun Wang, K. Nie, M. Zheng, 2010 .

Effect of Necklace-Type Distribution of SiC Particles on Dry Sliding Wear Behavior of As-Cast AZ91D/SiCp Composites

Xiaojun Wang, N. Lu, Hua-nan Liu, 2020 .

Anisotropic mechanical and physical properties in textured Ti 2 AlC reinforced AZ91D magnesium composite

Xiaoshi Hu, Wenbo Yu, Hongbin Zhao, 2018 .

Enhanced overall strength and ductility of magnesium matrix composites by low content of graphene nanoplatelets

Xiaojun Wang, M. Gupta, Kun Wu, 2017 .

Beyond the dimensional limitation in bio-inspired composite: Insertion of carbon nanotubes induced laminated Cu composite and the simultaneously enhanced strength and toughness

Xiaojun Wang, G. Fan, Kun Wu, 2018 .

Achieving ultra-high strengthening and toughening efficiency in carbon nanotubes/magnesium composites via constructing micro-nano layered structure

Xiaojun Wang, Kun Wu, Qiang Zhang, 2019, Composites Part A: Applied Science and Manufacturing.

Hot extrusion of SiCp/AZ91 Mg matrix composites

Xiaojun Wang, Kun Wu, K. Nie, 2012 .

Effects of hot rolling on microstructure, macrotexture and mechanical properties of pre-extruded AZ31/SiC nanocomposite sheets

Weiqing Liu, Xiaojun Wang, Kun Wu, 2017 .

Direct synthesis of graphene by blowing CO2 bubble in Mg melt for the seawater/oil pollution

W. Shao, Xiaoshi Hu, Xuejian Li, 2022, Journal of Alloys and Compounds.

Role of structural parameters on strength-ductility combination of laminated carbon nanotubes/copper composites

Xiaojun Wang, Linglong Meng, Xiaoshi Hu, 2019, Composites Part A: Applied Science and Manufacturing.

Decipher the ultra-high strengthening and toughening efficiency of GNS-MgO/Mg layered composite with in-situ enhanced interface

Xiaoshi Hu, Yeyang Xiang, Qian Zhang, 2022, Carbon.

Direct conversion of CO2 to graphene via vapor–liquid reaction for magnesium matrix composites with structural and functional properties

Xiaojun Wang, W. Shao, Xiaoshi Hu, 2021, Journal of Magnesium and Alloys.

Effects of hot extrusion on microstructure and mechanical properties of Mg matrix composite reinforced with deformable TC4 particles

Xiaojun Wang, Xiaoshi Hu, Xiaomeng Wang, 2020, Journal of Magnesium and Alloys.

Effects of Reinforced Particles on Dynamic Recrystallization of Mg Base Alloys during Hot Extrusion

Xiaojun Wang, Yanqiu Wang, K. Nie, 2014 .

Cobalt Sulfides Encapsulated in MOF-Derived Carbon Nanotubes for Enhanced Lithium Storage

H. Xie, Donghuang Wang, Q. Xiong, 2022, Journal of Electronic Materials.

Improving the Young's modulus of Mg via alloying and compositing – A short review

W. Gan, Xiaoshi Hu, Chao Xu, 2022, Journal of Magnesium and Alloys.

Interfacial Modification Using Matrix Alloying in Mg/CNT Composites for Improved Mechanical Performance

Xiaojun Wang, X. Leng, Linglong Meng, 2019, Journal of Materials Engineering and Performance.

Improved strengthening efficiency of nanoreinforcements realized by a novel melt spinning process

Xiaojun Wang, Linglong Meng, Xiaoshi Hu, 2018, Journal of Materials Research.

Processing, microstructure and mechanical properties of a novel mg matrix composites reinforced with urchin-like CNTs@SiCp

Xiaojun Wang, Chao Xu, W. Gan, 2020 .

Enhanced mechanical properties of CNTs/Mg biomimetic laminated composites

Xiaojun Wang, Xiaoshi Hu, Yeyang Xiang, 2021 .

Thin-Copper-Layer-Induced Early Fracture in Graphene-Nanosheets (GNSs)-Reinforced Copper-Matrix-Laminated Composites

W. Gan, Xiaoshi Hu, Chao Xu, 2022, Materials.

Microstructure evolution during superplastic deformation process and its impact on superplastic behavior of a Mg-Gd-Y-Zn-Zr alloy

Xiaojun Wang, Hua-nan Liu, Chao Sun, 2021 .

Development and strengthening mechanisms of a hybrid CNTs@SiCp/Mg-6Zn composite fabricated by a novel method

Xiaojun Wang, W. Gan, Xiaoshi Hu, 2020, Journal of Magnesium and Alloys.

Fabrication and strengthening mechanisms of magnesium matrix composites with bimodal microstructure induced by graphene nanoplatelets

Xiaojun Wang, Chao Xu, Xiaoshi Hu, 2021, Journal of Materials Research.

Titanium niobium oxides (TiNb2O7): Design, fabrication and application in energy storage devices

Yongjun Yuan, Q. Xiong, Yongqi Zhang, 2021, Sustainable Materials and Technologies.

Graphene nanoplatelets induced heterogeneous bimodal structural magnesium matrix composites with enhanced mechanical properties

Xiaojun Wang, M. Gupta, M. Zheng, 2016, Scientific Reports.

Achieving high strength and ductility in GNSs/Mg nanocomposites fabricated by in-situ liquid metallurgy combined with hot extrusion

W. Shao, Xiaoshi Hu, Chao Xu, 2022, Composites Part A: Applied Science and Manufacturing.

Fabrication, microstructure and mechanical properties of Mg matrix composites reinforced by high volume fraction of sphere TC4 particles

Xiaojun Wang, Xiaoshi Hu, Chunlei Zhang, 2016 .

Direct synthesis and modification of graphene in Mg melt by converting CO2: A novel route to achieve high strength and stiffness in graphene/Mg composites

Xiaojun Wang, W. Shao, Xiaoshi Hu, 2022, Carbon.

Microstructural modification and strength enhancement by SiC nanoparticles in AZ31 magnesium alloy during hot rolling

Weiqing Liu, Xiaojun Wang, Xiaoshi Hu, 2018 .

Effects of bimodal size SiC particles on the microstructure evolution and fracture mechanism of AZ91 matrix at room temperature

Xiaojun Wang, Ju-yan Shi, Cui-ju Wang, 2012 .

Microstructure and mechanical properties of bio-inspired Cf/Ti/Mg laminated composites

Xiaojun Wang, Xiaoshi Hu, Chunlei Zhang, 2018, Journal of Magnesium and Alloys.

Aging behavior of the extruded SiCp-reinforced AZ91 Mg alloy composite

Xiaojun Wang, Xiaoshi Hu, Libo Tong, 2018, Journal of Materials Research.

Low frequency damping capacities of commercial pure magnesium

Xiaojun Wang, M. Zheng, Xiaoshi Hu, 2012 .

Effect of small tensile deformation on damping capacities of Mg-1%Al alloy

M. Zheng, Xiaoshi Hu, K. Wu, 2010 .

Microstructure and mechanical properties of M40/AZ91 composites fabricated by pressure infiltration method

Xiaojun Wang, W. Gan, Xiaoshi Hu, 2021 .

E ﬀ ect of Necklace-Type Distribution of SiC Particles on Dry Sliding Wear Behavior of As-Cast AZ91D / SiC p Composites

N. Lu, Chao Sun, Xiaoshi Hu, 2020 .

A Novel Method to Fabricate CNT/Mg–6Zn Composites with High Strengthening Efficiency

Xiaojun Wang, Yudong Huang, Xiaoshi Hu, 2014, Acta Metallurgica Sinica (English Letters).

Damping behavior and mechanical properties of Mg-Cu-Mn alloy processed by equal channel angular pressing

M. Zheng, Xiaoshi Hu, G. Fan, 2008 .

A green and efficient method for preparing graphene using CO2@Mg in-situ reaction and its application in high-performance lithium-ion batteries

Xiaojun Wang, Xiaoshi Hu, Xuejian Li, 2022, Journal of Alloys and Compounds.

Processing, Microstructure, and Mechanical Behavior of Az31 Magnesium Alloy Fabricated by Electron Beam Additive Manufacturing

Xiaoshi Hu, Xuanchang Zhang, H. Shi, 2023, SSRN Electronic Journal.

Role of extrinsic and intrinsic toughening mechanisms in graphene nanosheets reinforced magnesium matrix layered composites

Xiaoshi Hu, Yeyang Xiang, H. Shi, 2023, Materials Science and Engineering: A.

Processing, microstructure, and mechanical behavior of AZ31 magnesium alloy fabricated by electron beam additive manufacturing

Xiaoshi Hu, Xuanchang Zhang, H. Shi, 2023, Journal of Alloys and Compounds.

Revealing the deformation behavior of graphene nanosheets (GNSs) reinforced copper matrix laminated composites via Viscoplastic Self-Consistent (VPSC) modeling

Linglong Meng, Xiaoshi Hu, H. Shi, 2024, Composites Communications.

Fabrication, Microstructure and Mechanical Properties of in situ GNPs Reinforced Magnesium Matrix Composites

Xiaoshi Hu, Xuejian Li, H. Shi, 2023, Acta Metallurgica Sinica (English Letters).