W. Qiu

发表

Utilization of VN particles for grain refinement and mechanical properties of AZ31 magnesium alloy

Jian Chen, J. He, Cong Li, 2019, Journal of Alloys and Compounds.

Influence of oxygen adsorption on the chemical stability and conductivity of transition metal ceramic coatings: First-principle calculations

Jian Chen, Yanjie Ren, J. Hsu, 2019, Applied Surface Science.

Dependence of Precursors on Solution-Processed SnO2 as Electron Transport Layers for CsPbBr3 Perovskite Solar Cells

Jian Chen, Jianlin Chen, Zhuoyin Peng, 2020 .

Enhancement on Charge Generation and Transfer Properties of Sb2S3 Quantum-Dot-Sensitized Solar Cells by ZnO Nanorods Optimization

Jian Chen, Zhou Liu, Jianlin Chen, 2020, Journal of Electronic Materials.

Orientation modulation of ZnO nanorods on charge transfer performance enhancement for Sb2S3 quantum dot sensitized solar cells

Jian Chen, Zhou Liu, Jianlin Chen, 2020 .

Interface connection modulation by heating treatment for photovoltaic performance enhancement on CuInS2 quantum dot sensitized solar cells

Jian Chen, Zhimin Liu, Yueli Liu, 2020 .

The Numerical Simulation for High Temperature Creep of the Porous Cu Alloy

Jian Chen, J. He, Jianlin Chen, 2013 .

Influence of Ca Content on Microstructure and Mechanical Properties of Extruded Mg–Al–Ca–Mn Alloys

Weiying Huang, Jianhua Chen, W. Qiu, 2022, Acta Metallurgica Sinica (English Letters).

Oxidation mechanism of a near β-Ti alloy

Libo Zhou, Cong Li, Yanjie Ren, 2022, Materials & Design.

Biomimetic deposition of apatite coatings on biomedical NiTi alloy coated with amorphous titanium oxide by microarc oxidation

Fu-ping Wang, W. Qiu, F. Liu, 2013 .

Study on the relationship between microstructure and mechanical property in a metastable β titanium alloy

Jian Chen, J. He, Cong Li, 2015 .

Limit of cold deformation in a near β-Ti alloy: role of α´ phases on the failure of β phase during cold rolling

Libo Zhou, K. Zhou, Cong Li, 2022, Journal of Materials Research and Technology.

A periodic voltage modulation effect on the corrosion oF Cu-Ni Alloy

S. Lalvani, W. Qiu, M. Pagano, 1995 .

Effects of glycine on mechanical properties and microstructure of diamond-reinforced Ni nanocomposite coatings

Yanheng Zhang, W. Qiu, Lu Feng, 2019, Journal of Materials Science.

Enhancement of the wear resistance of Ni-diamond composite coatings via glycine modification

Yanheng Zhang, W. Qiu, Lu Feng, 2020 .

Microstructure and properties of Mg–Ca–Zn alloy for thermal energy storage

Weiying Huang, Jian Chen, Zhuoyin Peng, 2022, Vacuum.

Influence of TiCN addition on the microstructures and mechanical properties of the AZ31 alloy

Wei Chen, Weiying Huang, Yanjie Ren, 2022, RSC advances.

Effect of Vanadium Nitride (VN) Particles on Microstructure and Mechanical Properties of Extruded AZ31 Mg Alloy

Wei Chen, Weiying Huang, Yanjie Ren, 2022, Acta Metallurgica Sinica (English Letters).

A study on corrosion of X80 steel in a simulated tidal zone

Tangqing Wu, W. Qiu, Lin Tan, 2021 .

Investigation on compressive behavior of Cu-35Ni-15Al alloy at high temperatures

Jian Chen, J. He, Cong Li, 2014 .

Effects of pre-compression on formation of dynamic precipitates and creep anisotropy of hot-extruded AZ91—2Y magnesium alloy

Jian Chen, Weiying Huang, Shengyi Zhang, 2022, Transactions of Nonferrous Metals Society of China.

Intergranular Corrosion Sensitivity of Welded Joint of Super304H at High Temperature

J. He, W. Qiu, Jian Chen, 2017 .

Study of Substrate Preheating on the Microstructure and Mechanical Performance of Ti-15mo Alloy Processed by Selective Laser Melting

Libo Zhou, Jinshan Sun, Yan Niu, 2022, SSRN Electronic Journal.

Effect of scanning strategies on the microstructure and mechanical properties of Ti–15Mo alloy fabricated by selective laser melting

Libo Zhou, Wei Chen, Jinshan Sun, 2022, Vacuum.

Effect of the Sic Particle Orientation Anisotropy on the Tensile Properties of a Spray-Formed Sicp/Al-Si Composite

J. J. He, W. Qiu, Y. P. Sun, 2014, Strength of Materials.

Band energy modulation on Cu-doped Sb2S3-based photoelectrodes for charge generation and transfer property of quantum dot–sensitized solar cells

Zhou Liu, Jianlin Chen, Zhuoyin Peng, 2020, Journal of Nanoparticle Research.

Degradation of graphene coated copper in simulated proton exchange membrane fuel cell environment: Electrochemical impedance spectroscopy study

J. J. He, M. Anisur, R. Raman, 2017 .

Effects of Substrate Temperature on the Corrosion Behaviour of Nanochromium Coatings Deposited by Direct Current Magnetron Sputtering

Jianlin Chen, W. Qiu, Jian Chen, 2016 .

Mechanism and Optimized Process Conditions of Forming One-Dimensional ZnO Nanorods with Al-Doping by Electrodeposition Method

Yu Zhang, Jianlin Chen, Zhuoyin Peng, 2021, International Journal of Photoenergy.

Twinning transfer in a near β-Ti alloy under high strain rate dynamic loading

Wei Chen, Yan Niu, Cong Li, 2023, Journal of Materials Research and Technology.

Influence of Heat Treatments on the Microstructure and Mechanical Properties in Ti-10V-2Fe-3Al Alloy

Jian Chen, J. He, Cong Li, 2015 .

Oxidation at defects in scales on iron-chromium alloys

W. Qiu, J. Swisher, W. D. Cho, 1992 .

Achieving excellent oxidation resistance in a Mg alloy by grain boundary adhesion and in-situ phase transformation

W. Qiu, Y. Ren, Yuming Liu, 2024, Journal of Materials Research and Technology.

Corrosion behavior of as-cast AZ91 magnesium alloy with VN particle additions in NaCl solution

Wei Chen, Weiying Huang, W. Qiu, 2023, Transactions of Nonferrous Metals Society of China.