J. Byeon

发表

Quantitative relation of discontinuous and continuous Mg17Al12 precipitates with corrosion rate of AZ91D magnesium alloy

Jae-Yeon Kim, J. Byeon, 2021 .

Corrosion Damage Monitoring of Stainless Steel by Acoustic Emission

J. Byeon, K. Wu, Seung-mi Lee, 2022 .

Ultrasonic monitoring performance degradation of lithium ion battery

Jae-Yeon Kim, J. Byeon, J. Jo, 2020 .

Evaluation of thermal degradation of 2.25Cr–1Mo steel by magnetic Barkhausen noise

C. S. Kim, S. Kwun, J. Byeon, 2004 .

Magnetic Evaluation of Microstructures and Strength of Eutectoid Steel

S. Kwun, J. Byeon, 2003 .

Evaluation of Microstructure and Mechanical Properties of Metals by Non-Destructive Methods

S. Kwun, J. Byeon, 2006 .

Evaluation of Fracture Strength of Silicon Die with Surface Condition by Ball Breaker Test

J. Byeon, 2013 .

Damage Evaluation in Lithium Cobalt Oxide/Carbon Electrodes of Secondary Battery by Acoustic Emission Monitoring

W. Jung, C. Choe, J. Byeon, 2015 .

Strength and corrosion resistance of Al-alloying layer on AZ31B magnesium alloy fabricated in situ by reactive friction stir processing

Jae-Yeon Kim, J. Byeon, Dong-O Kim, 2021 .

Effects of phase constituents/microstructure of thermally grown oxide on the failure of EB-PVD thermal barrier coating with NiCoCrAlY bond coat

Y. Sohn, J. Liu, J. Byeon, 2006 .

Real-Time Monitoring of Degradation of Zirconia Ceramic by Acoustic Emission

C. Choe, J. Byeon, K. Wu, 2013 .

Characterization of Long-Term Oxidized Nickel Aluminide Coating by Photoluminescence Spectroscopy

Y. Sohn, J. Liu, J. Byeon, 2005 .

Evaluation of health and safety of mechanically fatigued rechargeable lithium polymer batteries for flexible electronics applications

J. Byeon, J. Y. Kim, K. Yoo, 2019, Microelectronics Reliability.

The relation between mechanical properties and microstructural evolution induced by Sc microalloying in Al-20Zn-3Cu alloy

Leeseung Kang, K. Kim, J. Byeon, 2022 .

Optimum dopant content of n-type 95% Bi2Te3 + 5% Bi2Se3 compounds fabricated by gas atomization and extrusion process

B. Chun, J. Byeon, Yun-Seock Lee, 2006 .

Influence of Mechanical Fatigue at Different States of Charge on Pouch-Type Li-Ion Batteries

Jae-Yeon Kim, J. Byeon, Jaeheon Lee, 2022, Materials.

Effect of post-processing heat treatment on microstructure evolution and mechanical properties of in-situ Al/(Al3Ni-TiC) hybrid composite fabricated by friction stir processing using mechanically activated powders

Z. Sadeghian, J. Byeon, B. Lotfi, 2020, Metallic Materials.

Microstructural Evaluation of Isothermally Aged 12Cr Steel by Magnetic Property Measurement

C. S. Kim, J. Kang, S. Kwun, 2006 .

Magnetic nondestructive evaluation of thermally degraded 2.25Cr–1Mo steel

S. Kwun, J. Byeon, 2004 .

Tension twin-induced premature fracture mechanism of aging-treated AZ91D magnesium alloy

Jae-Yeon Kim, J. Byeon, K. Yoo, 2021 .

Transmission Electron Microscopy of Isothermally Oxidized EB-PVD Thermal Barrier Coating on (Ni,Pt)Al Bondcoat

Y. Sohn, J. Byeon, S. Laxman, 2005 .

Analysis on the phase transition behavior of Cu base bulk metallic glass by electrical resistivity measurement

M. Ok, J. Suh, Y. Ji, 2007 .

Evaluation of Pitting Corrosion Mechanism of AZ31 Magnesium Alloy by Monitoring Acoustic Emission

Jae-Yeon Kim, J. Byeon, Seung-mi Lee, 2017 .

In-situ monitoring of pitting corrosion on vertically positioned 304 stainless steel by analyzing acoustic-emission energy parameter

W. Jung, J. Byeon, K. Wu, 2016 .

Fabrication of AZ31/CNT Surface Composite by Friction Stir Processing

Jae-Yeon Kim, J. Byeon, Seung-mi Lee, 2015 .

Microstructural characterization and properties of in situ Al-Al3Ni/TiC hybrid composite fabricated by friction stir processing using reactive powder

Z. Sadeghian, J. Byeon, B. Lotfi, 2019, Materials Characterization.

Surface Modification of a Dental Ti by Blasted Coating of Bio-Active Calcium Phosphate

Soo‐Hyoung Lee, H. Lim, J. Byeon, 2007 .

Fabrication of AZ31/CNT Surface Nano-composite by Double-pass Friction Stir Processing

W. Jung, Jae-Yeon Kim, J. Byeon, 2017 .

Morphological estimation of pitting corrosion on vertically positioned 304 stainless steel using acoustic-emission duration parameter

Kaige Wu, Jai-Won Byeon, J. Byeon, 2019, Corrosion Science.

Acoustic Emission of Hydrogen Bubbles on the Counter Electrode during Pitting Corrosion of 304 Stainless Steel

W. Jung, J. Byeon, K. Wu, 2015 .

Evaluation of Corrosion Critical Variables of 304 Stainless Steel by Delay Time of Acoustic Emission

W. Jung, J. Byeon, K. Wu, 2015 .

Effect of Additive Powder on Microstructural Evolutions and Mechanical Properties of the Wide-gap Brazed Region in IN738 superalloy

Y. Kim, S. Kwun, J. Byeon, 2005 .

Natural Aging Effect of Al-20Zn-3Cu Alloy on Mechanical Properties and Its Relation to Microstructural Change

Leeseung Kang, K. Kim, J. Byeon, 2021, Metals.

Ultrasonic Evaluation of Creep Damage of High Temperature Metallic Materials with Different Microstructures

S. Kwun, J. Song, J. Byeon, 2004 .

Assessment of Tensile and Fatigue Damage in 316L Stainless Steel by Acoustic Emission Technique

S. Kwun, J. Byeon, K. Kang, 2007 .

Strain-Induced Martensitic Phase Transformation by Low-Cycle Fatigue in AISI 316L Stainless Steel

Y. Jeon, S. Kwun, J. Byeon, 2008 .

Effect of Sn-Addition on the Bonding Strength between Casting Au-Pt-Cu Alloy and SiO2-Based Porcelain

H. Lim, J. Byeon, J. Doh, 2007 .

Mechanical strength and corrosion resistance of Al-additive friction stir welded AZ31B joints

Jae-Yeon Kim, J. Byeon, Jaeheon Lee, 2022, Journal of Magnesium and Alloys.

Corrosion Inhibition of Mild Steel and 304 Stainless Steel in 1 M Hydrochloric Acid Solution by Tea Tree Extract and Its Main Constituents

Jae-Yeon Kim, J. Byeon, I. Shin, 2021, Materials.

EFFECT OF INDIUM ADDITION ON MICROSTRUCTURE AND STRENGTH OF Au–Pt–Cu–Sn DENTAL BIOMATERIAL

J. Byeon, 2010 .

Surface modification of cast inconel 740 superalloy by heat-assisted friction stir processing

W. Jung, Jae-Yeon Kim, J. Byeon, 2016, Metals and Materials International.

Feasibility Study on Ultrasonic Velocity for Evaluation of Microstructure and Quality of Cast Iron

J. Byeon, C. Hyun, Chan-Yang Choi, 2012 .

Ultrasonic Nondestructive Evaluation of the Creep Damaged IN738LC Superalloy

S. Kwun, J. Song, J. Byeon, 2004 .

Health monitoring of mechanically fatigued flexible lithium ion battery by electrochemical impedance spectroscopy

Jae-Yeon Kim, J. Byeon, Jin-Yeong Kim, 2020 .

Correlation of Magnetic Barkhausen Emission Profile with Strength of Thermally Degraded 2.25Chromium-1Molybdenum Steel

Y. Sohn, S. Kwun, J. Byeon, 2005 .

Terminal Sinter-Bonding Using Silver Paste for Aluminum Nitride Heater

Min-Su Kim, J. Byeon, Dong-Yurl Yu, 2021, Journal of Welding and Joining.

Failure mechanism of Ag nanowire-coated conductive transparent electrode for wearable devices under folding and torsional fatigue condition

Jae-Yeon Kim, Hye-Young Kim, Jai-Won Byeon, 2018, Microelectron. Reliab..

Nondestructive Evaluation of Thermally Degraded 2.25Cr-1Mo Steel by Electrical Resistivity Measurement

Sook In Kwun, S. Kwun, J. Byeon, 2003 .

Evaluation of Thermal Degradation of 2.25Cr-1Mo Steel by High Frequency Ultrasonic Attenuation Measurement

S. Kwun, S. Hong, J. Byeon, 2005 .

Evaluation of Cracking Damage in Electrode Materials of an Lmo/Al-Li Lithium-Ion Battery Through Analysis of Acoustic Emission Signals

Jae-Yeon Kim, J. Byeon, Jaeheon Lee, 2023, SSRN Electronic Journal.

Evaluation of Creep Reliability of Powder Metallurgy and Cast-type Ni-based Superalloy by Using Ultrasonic Wave

S. Kwun, J. Byeon, C. Hyun, 2012 .

Failure analysis of thermally abused lithium-ion battery cell by microscopy, electrochemical impedance spectroscopy, and acoustic emission

Z. L. Wang, S. M. Lee, J. Byeon, 2019, Microelectronics Reliability.

A study on the electrochemical properties of silicon/carbon composite for lithium-ion battery

H. Ahn, Jou‐Hyeon Ahn, B. S. Reddy, 2023, Journal of Energy Storage.

Detection of Acoustic Signal Emitted during Degradation of Lithium Ion Battery

J. Byeon, Chan-Yang Choi, 2013 .

Recycling for Recovery of Critical Metals from LiCoO2 Cathode Material Through Methanesulfonic Acid-Citric Acid Organic Leaching System

Jae-Yeon Kim, J. Byeon, Junmo Ahn, 2023, Mining, Metallurgy & Exploration.

Optimization of carbon coating thickness to prevent crack generation in Sn nanoparticles during charge/discharge process and their electrochemical properties

H. Ahn, Jou‐Hyeon Ahn, Ki-won Kim, 2020 .