Y. Miyajima

发表

Synthesis of non-equilibrium phases in immiscible metals mechanically mixed by high pressure torsion

M. Umemoto, N. Tsuji, Y. Yokoyama, 2011 .

Recrystallization Texture of Heavily Cold Rolled Polycrystalline Nickel Sheets with and without Strong Starting Cube Texture

N. Tsuji, D. Terada, Y. Miyajima, 2013 .

Changes in Strength and Microstructure of Cu (100) [001] Single Crystals Caused by Accumulative Roll-Bonding

S. Onaka, Y. Miyajima, Akari Yoshida, 2012 .

Evolution of Microstructure and Texture During Cold Rolling and Annealing of a Highly Cube-Textured ({001}$$ \left\langle {100} \right\rangle $$) Polycrystalline Nickel Sheet

N. Tsuji, D. Terada, Y. Miyajima, 2012 .

Stability of Cube Oriented Grains during Cold-Rolling of Highly Cube-Oriented Polycrystalline Nickel

N. Tsuji, D. Terada, Y. Miyajima, 2011 .

Evolution of the spread of crystal orientation with plastic deformation in a cold-rolled Cu single crystal

S. Onaka, Y. Miyajima, Akari Yoshida, 2014, Journal of Materials Science.

Contactless electrical conductivity measurement of metallic submicron-grain material: Application to the study of aluminum with severe plastic deformation.

K. Tsuruta, D. Terada, Y. Miyajima, 2016, The Review of scientific instruments.

Effects of strain rate on mechanical properties of heterogeneous nano-structured SUS316LN stainless steel: Revealed by in-situ X-Ray diffraction at synchrotron radiation facility

H. Miura, C. Watanabe, Hua Jiang, 2021 .

Dislocation Density Changes in Ultrafine‐Grain Aluminum during Tensile Deformation

N. Tsuji, H. Adachi, A. Shibata, 2012 .

Probing the band structure of hydrogen-free amorphous carbon and the effect of nitrogen incorporation

S. R. Silva, J. Shannon, Y. Tison, 2011 .

Hydrogenated amorphous carbon and carbon nitride films deposited at low pressure by plasma enhanced chemical vapor deposition

S. R. Silva, S. Henley, Y. Miyajima, 2011 .

Electrical conduction mechanism in laser deposited amorphous carbon

D. Cox, S. R. Silva, J. Shannon, 2007 .

Plastic Instability Criterion Based on New Necking Parameters for Cu–Al, Cu–A5052, and Cu–A5083 Roll-Bonded Laminated Metal Composites Fabricated Without Post-Annealing

T. Fujii, Y. Miyajima, T. Yamada, 2022, Journal of Materials Processing Technology.

Change in Crystal Orientations of a {100} 〈001〉 Pure Aluminum Single Crystal during Accumulative Roll Bonding

N. Tsuji, D. Terada, Y. Miyajima, 2011 .

Grain Size Variation during Low Temperature Creep and Tensile Deformation of Ultrafine-Grained Copper

S. Onaka, T. Fujii, Y. Miyajima, 2013 .

Ultimate Rolling Texture in Pure Aluminum Highly Deformed by Accumulative Roll Bonding: Taylor Orientation Formed beyond Grain Subdivision

N. Tsuji, Y. Miyajima, Daisuke Kashioka, 2017 .

Temperature and strain-rate dependence of flow stress of nanocrystalline nickel fabricated by electrolytic deposition

H. Adachi, T. Fujii, Y. Miyajima, 2020 .

Stability of Fatigued Dislocation Wall Structure in Coarse-Grained and Ultrafine-Grained Aluminum against Monotonic Tensile Deformation

S. Onaka, T. Fujii, Y. Miyajima, 2013 .

Destruction of mesoscopic chemically modulated domains in single phase high entropy alloy via plastic deformation

N. Tsuji, S. Yoshida, K. Takeda, 2022, Scientific Reports.

High strength and low electrical resistivity of Al-0.1 at.%Ni alloys produced by accumulative roll bonding

H. Adachi, K. Ishikawa, Y. Miyajima, 2022, Materials Today Communications.

Morphological and Crystallographic Characteristics of Incoherent Octahedral FCC Co Precipitates in a Cu Matrix

S. Onaka, T. Fujii, Y. Miyajima, 2012 .

Evaluation of Dislocation Density for 1100 Aluminum with Different Grain Size during Tensile Deformation by Using In-Situ X-ray Diffraction Technique

N. Tsuji, H. Adachi, Masugu Sato, 2014 .

Effects of rolling and annealing on hydrogen permeability and crystal orientation in Nb-TiNi two-phase alloys

A. Machida, K. Ishikawa, Y. Miyajima, 2019, International Journal of Hydrogen Energy.

Microstructural Changes and Hydrogen Permeability of Rolled and Annealed Nb30Ti35Co35 Alloys

K. Ishikawa, Y. Miyajima, Yuki Hamasaki, 2021, MATERIALS TRANSACTIONS.

Quantification of internal dislocation density using scanning transmission electron microscopy in ultrafine grained pure aluminium fabricated by severe plastic deformation

N. Tsuji, M. Mitsuhara, H. Nakashima, 2010 .

Role of ferrite and austenite phases on the deformation behavior and mechanical properties in heterogeneous nanostructured duplex stainless steel aged at different temperatures

H. Miura, S. Suzuki, Hua Jiang, 2022, Journal of Materials Science.

Dislocation density of pure copper processed by accumulative roll bonding and equal-channel angular pressing

S. Onaka, T. Fujii, Y. Miyajima, 2015 .

Effects of Si on mechanical properties and microstructure evolution in ultrafine-grained Cu–Si alloys processed by accumulative roll bonding

S. Onaka, T. Fujii, Y. Miyajima, 2013 .

Change in electrical resistivity of commercial purity aluminium severely plastic deformed

N. Tsuji, M. Mitsuhara, H. Nakashima, 2010 .

Retardation of Softening of Ultrafine-Grained Copper during Low Temperature Annealing under Uniaxial Tensile Stress

H. Adachi, S. Onaka, T. Fujii, 2012 .

Effect of low-temperature annealing on electrical resistivity and mechanical properties of laser-powder bed fused AlSi10Mg alloy

N. Takata, K. Ishikawa, Y. Miyajima, 2023, Materials Science and Engineering: A.

Change in Microstructure and Electrical Resistivity of Cu–Zn Alloy Due to Rolling

H. Miura, T. Okada, K. Ishikawa, 2022, MATERIALS TRANSACTIONS.

Microstructural change due to isochronal annealing in severely plastic-deformed commercial purity aluminium

N. Tsuji, M. Mitsuhara, H. Nakashima, 2015 .

Quantification of Lattice Defects in Ultra-fine Grained Metals Fabricated by Severe Plastic Deformation

Y. Miyajima, 2012 .

Log Angles: Characteristic Angles of Crystal Orientation Given by the Logarithm of Rotation Matrix

S. Onaka, Y. Miyajima, M. Osada, 2016 .

Effects of Temperature and Strain Rate on Plastic Deformation of Ultrafine-Grained Copper Prepared by Equal-Channel Angular Pressing

S. Onaka, T. Fujii, Y. Miyajima, 2014 .

In-situ X-ray diffraction during tensile deformation of ultrafine-grained copper using synchrotron radiation

H. Adachi, T. Fujii, Y. Miyajima, 2016 .

Effect of Roll-Bonding and Subsequent Annealing on Microstructure Evolution of Accumulative Roll Bonded Pure Copper

H. Adachi, S. Onaka, T. Fujii, 2016 .

Pulsed laser deposited tetrahedral amorphous carbon with high sp3 fractions and low optical bandgaps

E. García-Caurel, J. Shannon, B. Drévillon, 2009 .

Effects of Temperature and Strain Rate on Plastic Deformation of Ultra fi ne-Grained Copper Prepared by Equal-Channel Angular Pressing

S. Onaka, T. Fujii, Y. Miyajima, 2014 .

The importance of oxygen-containing defects on carbon nanotubes for the detection of polar and non-polar vapours through hydrogen bond formation

S. Ravi P. Silva, P. C. P. Watts, J. David Carey, 2007 .

Electronic state modification in laser deposited amorphous carbon films by the inclusion of nitrogen

E. García-Caurel, J. Shannon, B. Drévillon, 2008 .

Surface induced bulk modifications of amorphous carbon nitride films by post-deposition oxygen and hydrogen plasma treatment

D. Zeze, Y. Miyajima, S. Nitta, 2005 .

Electrical properties of pulsed UV laser irradiated amorphous carbon

J. Shannon, A. Adikaari, S. Henley, 2008 .

Amorphous carbon and carbon nitride bottom gate thin film transistors

M. Shkunov, Y. Miyajima, S. Silva, 2009 .

Effects of Rolling Reduction and Strength of Composed Layers on Bond Strength of Pure Copper and Aluminium Alloy Clad Sheets Fabricated by Cold Roll Bonding

S. Onaka, Y. Miyajima, M. Kato, 2014 .

Effect of Sintering Temperature on Mechanical Property of Ti + ZrO2 Prepared by Spark Plasma Sintering for Biomedical Applications

K. Kondoh, K. Ishikawa, Y. Miyajima, 2021 .

Change in Mechanical and Electrical Properties of Accumulative Roll Bonding Processed High-Purity Aluminum, Al–0.02 mass%Fe and Al–0.2 mass%Fe Alloys

H. Adachi, T. Fujii, Y. Miyajima, 2020 .

Evolution of Microstructure and Texture During Cold Rolling and Annealing of a Highly Cube-Textured ({001}$$ \left\langle {100} \right\rangle $$) Polycrystalline Nickel Sheet

N. Tsuji, D. Terada, Y. Miyajima, 2012, Metallurgical and Materials Transactions A.