Z. Du

发表

Preparation and Properties of Special Vehicle Cover via a Novel Squeeze Casting Quantitative Feeding System of Molten Metal

Gang Chen, Yushi Qi, Lili Chen, 2020 .

Preparation and Mechanical Properties of ZK61-Y Magnesium Alloy Wheel Hub via Liquid Forging—Isothermal Forging Process

Hongming Zhang, Gang Chen, Yushi Qi, 2020, Metals.

Study on Performance of 8YSZ Thick Gradient TBC

Gang Chen, Yushen Jin, Jing-Kai Qin, 2014 .

Investigation of semi-solid aluminum alloy filling-plastic flowing in thixoforging

Gang Chen, Jing-Kai Qin, Z. Du, 2010 .

Effect of Pressure on Microstructure and Mechanical Properties of AM60B Alloy Used for Motorcycle Wheels Formed by Double Control Forming

Yuansheng Cheng, Jufu Jiang, Z. Du, 2013 .

Motion and mass transfer models for single bubble in an aluminum melt under a compound field of ultrasonic and rotating flow

Z. Du, D. Shi, Ao Wang, 2020 .

Research on Squeeze Casting Composite Mold Materials by Plasma Spraying

Xu Song, Z. Du, Yong-gen Sun, 2021 .

Investigation of selected parameters effect on 3D printed sand mold properties through Taguchi method

Yan-qing Su, Z. Du, D. Shi, 2021 .

Microstructures, Mechanical Properties and Thixoformability of TiB2/Al Composite Prepared by Ultrasonic-Assisted Squeeze Casting

J. Ding, Z. Du, Gang Chen, 2022, Journal of Materials Engineering and Performance.

Low temperature extrusion of 6061 aluminum matrix composite reinforced with SnO2-coated Al18B4O33 whisker

W. Fei, P. Jin, Z. Du, 2012 .

Effect of Zn/Mg/Cu Additions on Hot Cracking Tendency and Performances of Al-Cu-Mg-Zn Alloys for Liquid Forging

Yuansheng Cheng, Y. Su, Z. Du, 2020, Journal of Wuhan University of Technology-Mater. Sci. Ed..

A novel approach to fabricate ceramic/metal interpenetrating phase composites by ultrasonic-assisted spontaneous infiltration

W. Han, Zhengwei Li, Gang Chen, 2021 .

Thermal expansion behavior of aluminum matrix composite reinforced by SnO2-coated Al18B4O33 whisker

W. Fei, P. Jin, Z. Du, 2013 .

Microstructure and Mechanical Properties of Al-5Cu-4.5Mg-2.5Zn Squeeze Cast Alloy

Yuansheng Cheng, Y. Su, Z. Du, 2022, Journal of Wuhan University of Technology-Mater. Sci. Ed..

Microstructures, Mechanical Properties and Thixoformability of TiB2/Al Composite Prepared by Ultrasonic-Assisted Squeeze Casting

J. Ding, Z. Du, Gang Chen, 2022, Journal of Materials Engineering and Performance.

Dislocation Density-Based Constitutive Model and Processing Map for T2 Copper During Isothermal and Time-Variant Deformation

Gang Chen, Z. Du, Cheng Zhang, 2022, Metals and Materials International.

Study on the sintering mechanism and properties of porous ceramics prepared by silicon carbide abrasive particles with multi-mineral sintering additives and silica sols

Z. Du, Yanchun Wang, Yanhan Fei, 2022, Ceramics International.

Study on Squeeze Casting Metal-zirconium Composite Die Material by Hot Press Sintering

Yuansheng Cheng, Lili Chen, Z. Du, 2021, Journal of Wuhan University of Technology-Mater. Sci. Ed..

Preparation and properties of high-porosity ZrB2-SiC ceramics by water-based freeze casting

W. Han, Yushi Qi, Z. Du, 2020 .

Preparation and properties of ZrB2–SiC porous ceramics by spark plasma sintering

W. Han, Gang Chen, Yushi Qi, 2019, Journal of the Ceramic Society of Japan.

Formation of in-situ Al3Ti particles from globular Ti powders and Al alloy melt under ultrasonic vibration

Gang Chen, N. Hu, Fei Han, 2015 .

Study on Partial Remelting Microstructures and Mechanical Properties of ZK60-RE Magnesium Alloy

Z. Du, Shou-jing Luo, W. Shan, 2006 .

Enhancing room temperature mechanical properties of Mg–9Al–Zn alloy by multi-pass equal channel angular extrusion

Yi Sun, Jufu Jiang, Ying Wang, 2010 .

Effects of variable-cavity liquid forging on microstructure and mechanical properties of Mg–Zn–Y–Zr alloy

Yushi Qi, Z. Du, Yongwang Liu, 2019, Materials Characterization.

Microstructures, mechanical properties and solidification mechanism of a hot tearing sensitive aluminum alloy asymmetric part fabricated by squeeze casting

Wei Sun, Hongming Zhang, Gang Chen, 2021 .

Effect of reaction temperature on the microstructures and mechanical properties of high-intensity ultrasonic assisted in-situ Al3Ti/2024 Al composites

Xiaoguo Song, Gang Chen, N. Hu, 2016 .

Formation of Fine Spheroidal Microstructure of Semi-Solid Al–Zn–Mg–Cu Alloy by Hyperthermally and Subsequent Isothermally Reheating

Gang Chen, Jufu Jiang, Z. Du, 2013 .

Preparation and thixoforging of semisolid billet of AZ80 magnesium alloy

Jufu Jiang, Ying Wang, Z. Du, 2010 .

Effect of ultrasonic vibration and solution-aging treatment on microstructure and properties of in-situ TiAl3/7050Al composites

Lili Chen, Z. Du, Lihua Chen, 2017 .

Research of SiCP/2A50 Composite Materials Creeper Treads Prepared by Liquid Forging

Gang Chen, Z. Du, S. Xie, 2011 .

Fabrication and performance analyses of 45# steel supports using liquid forging

Lili Chen, Z. Du, Lihua Chen, 2020, Journal of Zhejiang University-SCIENCE A.

Effect of mechanical conditions on the microstructures and mechanical properties of thixoformed Al–Cu–Si–Mg alloy

Yuansheng Cheng, Gang Chen, Z. Du, 2012 .

Microstructure evolution of AM60 magnesium alloy semisolid slurry prepared by new SIMA

Yi Sun, Jufu Jiang, Ying Wang, 2010 .

Effect of compound loading on microstructures and mechanical properties of 7075 aluminum alloy after severe thixoformation

Qiang Chen, Gang Chen, Z. Du, 2016 .

Microstructure and mechanical properties of AZ61 magnesium alloy parts achieved by thixo-extruding semisolid billets prepared by new SIMA

Jufu Jiang, Ying Wang, Z. Du, 2013 .

Microstructural Evolution of 7050 Aluminum Alloy Semisolid Billets Fabricated by RAP Process

Jufu Jiang, Ying Wang, Z. Du, 2014 .

Microstructure and properties of AZ80 alloy semisolid billets fabricated by new strain induced melt activated method

Jufu Jiang, Ying Wang, Z. Du, 2012 .

Homogenization on microstructure and mechanical properties of 2A50 aluminum alloy prepared by liquid forging

Gang Chen, Fei Han, Z. Du, 2011 .

Tensile properties of as-deformed 2A50 aluminum alloy in semi-solid state

Gang Chen, Z. Du, S. Xie, 2010 .

Numerical simulation and experiment validation of thixoforming angle frame of AZ61 magnesium alloy

Jufu Jiang, Ying Wang, Z. Du, 2010 .

Microstructure and mechanical properties of thin-wall and high-rib parts of AM60B Mg alloy formed by double control forming and die casting under the optimal conditions

Gang Chen, Jufu Jiang, Ying Wang, 2013 .

Inhomogeneity of density and mechanical properties of A357 aluminum alloy backward extruded in semi-solid state

Yuansheng Cheng, Gang Chen, Z. Du, 2011 .

Numerical Simulation of Pressure Influence on Workpiece Properties during Thixoforging

Z. Du, Y. Cui, W. Shan, 2006 .

Uniformity and continuity of effective strain in AZ91D processed by multi-pass equal channel angular extrusion

Z. Du, Shou-jing Luo, Xiao-hua Zhang, 2008 .

Effect of SnO2 Coating on the Low Temperature Extrusion of 6061Al Matrix Composite Reinforced with Aluminum Borate Whisker

Z. Du, P. Zhao, L. Wang, 2011 .

Influence of Die Angle on the Extrusion Behavior of 6061Al Matrix Composite Reinforced with SnO2-Coated Aluminum Borate Whisker

Z. Du, P. Zhao, L. Wang, 2011 .

Hot tensile behavior of an extruded Al-Zn-Mg-Cu alloy in the solid and in the semi-solid state

H. Atkinson, Gang Chen, Jufu Jiang, 2014 .

High Volume Fraction Al2O3/Al Composite Thixoforging in Pseudo-Semi-Solid State

Z. Du, Shou-jing Luo, Y. Cheng, 2006 .

Microstructure evolution and tensile mechanical properties of thixoformed high performance Al-Zn-Mg-Cu alloy

Qiang Chen, Gang Chen, Z. Du, 2015, Metals and Materials International.

Enhanced Mechanical Properties and Thermal Conductivity for GNPs/Al2024 Composites with In Situ SiC Nanorods

Yushi Qi, Lili Chen, Z. Du, 2020, Metals and Materials International.