C. Masuda

发表

Fabrication process of carbon nanotube/light metal matrix composites by squeeze casting

K. Shinozaki, Makoto Yoshida, T. Matsunaga, 2008 .

In situ detection of fiber break and analysis of its effect on stress transfer during tensile tests of a metal matrix composite

C. Masuda, Y. Tanaka, Y.F. Liu, 1999 .

Fatigue properties and fatigue fracture mechanisms of SiC whiskers or SiC particulate-reinforced aluminium composites

Yoshihisa Tanaka, C. Masuda, 1992 .

Numerical Analysis of the Interface Problem in Continuous Fiber Ceramic Composites

Y. Kagawa, C. Masuda, 1999 .

Debonding mechanisms in the presence of an interphase in composites

Yoshihisa Tanaka, C. Masuda, Yufu Liu, 1998 .

In situ observation on fatigue crack growth in SCS-6/Ti-15-3 composite at elevated temperatures

Yoshihisa Tanaka, C. Masuda, Z. Deng, 2003 .

Thermal Conductivity and Tensile Properties of Carbon Nanofiber-Reinforced Aluminum-Matrix Composites Fabricated via Powder Metallurgy: Effects of Ball Milling and Extrusion Conditions on Microstructures and Resultant Composite Properties

C. Masuda, Fumio Ogawa, S. Yamamoto, 2018, Acta Metallurgica Sinica (English Letters).

Structure and Tribological Behavior of Nitrogenated Diamond-Like Carbon Films Prepared by Plasma CVD

C. Masuda, A. Kawana, N. Hidaka, 2012 .

Microstructure and role of outermost coating for tensile strength of SiC fiber

Y. Kagawa, Yoshihisa Tanaka, C. Masuda, 1998 .

Estimation of residual stresses in SiC/Ti-15-3 composites and their relaxation during a fatigue test

Y. Kagawa, C. Masuda, J. Bobet, 1997 .

Measurements of thermal residual stresses in SiC/Ti-15-3 composites

C. Masuda, J. Bobet, 1996 .

Microstructural characterization of interface in SiC fiber-reinforced Ti-15V-3Cr-3Al-3Sn matrix composite

H. Saito, S. Guo, Y. Kagawa, 1998 .

Effect of interfacial properties on tensile strength in SiC/Ti-15-3 composites

Y. Kagawa, A. Fukushima, C. Fujiwara, 2000 .

Observation of fatigue damage process in SiC fiber-reinforced Ti-15-3 composite at high temperature

Y. Kagawa, Y. Liu, C. Masuda, 1999 .

Interface damage mechanism during high temperature fatigue test in SiC fiber-reinforced Ti alloy matrix composite

Y. Kagawa, Y. Liu, Yoshihisa Tanaka, 2001 .

Strong, ductile, and thermally conductive carbon nanotube-reinforced aluminum matrix composites fabricated by ball-milling and hot extrusion of powders encapsulated in aluminum containers

C. Masuda, Fumio Ogawa, S. Yamamoto, 2018 .

The generalized relationship between the parameters C and m of Paris' law for fatigue crack growth

K. Tanaka, C. Masuda, K. Tanaka, 1981 .

Compressive deformation of MWCNT porous preform during infiltration of aluminum or magnesium alloy

K. Shinozaki, Makoto Yoshida, T. Matsunaga, 2007 .

Fabrication and the mechanical and physical properties of nanocarbon-reinforced light metal matrix composites: A review and future directions

C. Masuda, Fumio Ogawa, 2021, Materials Science and Engineering: A.

Fatigue Fracture Mechanisms for Caliber Rolled AZ91D Magnesium Alloys

C. Masuda, N. Fuyama, T. Fujii, 2003 .

In situ chemical vapor deposition of metals on vapor-grown carbon fibers and fabrication of aluminum-matrix composites reinforced by coated fibers

H. Fujii, C. Masuda, Fumio Ogawa, 2018, Journal of Materials Science.

Fabrication of carbon nanofiber-reinforced aluminum matrix composites assisted by aluminum coating formed on nanofiber surface by in situ chemical vapor deposition

C. Masuda, Fumio Ogawa, 2014 .

Fabrication of Al-coated CNF reinforced aluminum matrix composite by pressureless infiltration

C. Masuda, Fumio Ogawa, Mitsunori Kawaguchi, 2016 .

Relationship between tribological properties and sp3/sp2 structure of nitrogenated diamond-like carbon deposited by plasma CVD

C. Masuda, H. Ichimura, A. Kawana, 2012 .

Fatigue striation in a wide range of crack propagation rates up to 70 μm/cycle in a ductile structural steel

A. Ohta, C. Masuda, E. Sasaki, 1980 .

Noncontact Ultrasonic Imaging of Subsurface Defects Using a Laser-Ultrasonic Technique

Tetsuya Saito, H. Yamawaki, C. Masuda, 1996 .

Fatigue properties of Cu-Cr in situ composite

Yoshihisa Tanaka, C. Masuda, 2006 .

Fabrication Process of Carbonaceous Fiber Reinforced Al and/or Mg Alloy(s) Composites by Squeeze Casting

C. Masuda, K. Kobayashi, H. Uozumi, 2006 .

In situ x-ray CT under tensile loading using synchrotron radiation

T. Hirano, C. Masuda, Y. Tanaka, 1995 .

Observation of Inner Fibers in Metal Matrix Composites by X-ray Computed Tomography Using Synchrotron Radiation

T. Hirano, Y. Imai, Yoshihisa Tanaka, 1992 .

Evaluation of the Wear Energy Consumption of Nitrogenated Diamond-Like Carbon Against Alumina

K. Kondoh, C. Masuda, M. Egashira, 2014, Tribology Letters.

Tribological behavior of diamond-like carbon produced by rf-PCVD based on energetic evaluation

C. Masuda, A. Kawana, S. Yamamoto, 2013 .

Variation of fractographic appearance for different microstructures in welded joints having the same fatigue crack propagation properties

H. Sumiyoshi, A. Ohta, C. Masuda, 1987 .

RELATIONSHIP BETWEEN FATIGUE STRENGTH AND HARDNESS FOR HIGH STRENGTH STEELS.

Yoshihisa Tanaka, C. Masuda, 1986 .

Tribological behaviour of stainless steel with respect to that of DLC in terms of energetic aspects

C. Masuda, A. Kawana, S. Yamamoto, 2013 .

Evaluation of temperature distribution in steel balls induced by friction generated during tribotest against diamond like carbon coatings

K. Kondoh, T. Okuaki, C. Masuda, 2015 .

Interface Observation of Aluminum-Coated Carbon Nanofibers Prepared by in Situ Chemical Vapor Deposition

C. Masuda, Fumio Ogawa, 2017 .

Effect of interfacial debonding and sliding on matrix crack initiation during isothermal fatigue of SCS-6/Ti-15-3 composites

Y. Liu, Yoshihisa Tanaka, C. Masuda, 2000 .

Effect of Ir on the Microstructural Stability of the 6 th Generation Ni-Base Single Crystal Superalloy, TMS-238

K. Kawagishi, T. Yokokawa, Toshiharu Kobayashi, 2015 .

An efficient BEM to calculate weight functions and its application to bridging analysis in an orthotropic medium

R. Yuuki, C. Masuda, Y.F. Liu, 1998 .

Effect of microstructural parameters on the fracture behavior of fiber-reinforced ceramics

R. Yuuki, Y. Liu, C. Masuda, 1998 .

Fatigue damage evolution in SiC fiber-reinforced Ti-15-3 alloy matrix composite

S. Guo, Y. Kagawa, C. Masuda, 1996 .

Modelling of Grain Boundary Stability of Materials under Severe Plastic Deformation and Experimental Verification

C. Masuda, Yoshiyuki Saito, 2010 .

Microstructure evolution during fabrication and microstructure–property relationships in vapour-grown carbon nanofibre-reinforced aluminium matrix composites fabricated via powder metallurgy

C. Masuda, Fumio Ogawa, 2015 .