Yaokun Pan

发表

Investigations on microstructures, mechanical and corrosion properties of Mg-5.5Zn-0.8Zr alloys with Sm addition

Tiantian Zhang, H. Cui, Xiaoli Cui, 2019, Materials Research Express.

The Influence of Abnormal Segregation Band on Mechanical Properties of Hot Rolled Ferrite/Pearlite Steel Plate

H. Cui, Rui Feng, Yaokun Pan, 2018 .

Influence of Al2O3–Y2O3 and Ce–Al–Ni amorphous alloy on physical properties of laser synthetic composite coatings on titanium alloys

S. Gong, F. Weng, Chuanzhong Chen, 2014 .

Optimization of Micro-arc Oxidation Parameters for Preparing AlN Complex Ceramic Coatings on 1060 Al Substrate

Shumin Xu, Rui Feng, Yaokun Pan, 2021 .

Effect of carbon nanotubes on the microstructure and properties of plasma electrolytic oxidized ceramic coatings on high silicon aluminum alloy

X. Fang, H. Cui, Xiaoli Cui, 2022, Journal of Materials Research and Technology.

Fabrication of hypoeutectic Al-4Si alloy with high electrical conductivity, high plasticity and medium strength by the dual treatment of Al matrix and eutectic Si microstructure

Xiangfa Liu, H. Cui, Xiaoli Cui, 2021 .

Mixed-valent MnSiO3/C nanocomposite for high-performance asymmetric supercapacitor.

G. Xia, Chuanzhong Chen, Cheng Hu, 2019, Journal of colloid and interface science.

Effect of electrolyte composition on the microstructure and bio-corrosion behavior of micro-arc oxidized coatings on biomedical Ti6Al4V alloy

Lei Zhang, H. Cui, Xiaoli Cui, 2020, Journal of Materials Research and Technology.

In Vitro Degradation and Corrosion Evaluations of Plasma Electrolytic Oxidized Mg-Zn-Ca-Si Alloys for Biomedical Applications

X. Fang, Chuanzhong Chen, Rui Feng, 2023, Social Science Research Network.

Ductility enhancement in an as-extruded Mg-5.5Zn-0.8Zr alloy by Sm alloying

Qiurong Jia, Juan Zhao, Tiantian Zhang, 2019, Journal of Alloys and Compounds.

The improvement mechanism of good matching between electrical conductivity and mechanical properties for Al-4Si-0.8Mg-0.6Fe alloy

H. Cui, Xiaoli Cui, Rui Feng, 2022, Journal of Alloys and Compounds.

In vitro degradation and electrochemical corrosion evaluations of microarc oxidized pure Mg, Mg-Ca and Mg-Ca-Zn alloys for biomedical applications.

Chuanzhong Chen, D. Wang, Yaokun Pan, 2015, Materials science & engineering. C, Materials for biological applications.

Dissolution and precipitation behaviors of silicon-containing ceramic coating on Mg-Zn-Ca alloy in simulated body fluid.

Chuanzhong Chen, D. Wang, Yaokun Pan, 2014, Colloids and surfaces. B, Biointerfaces.

Effect of calcium on the microstructure and corrosion behavior of microarc oxidized Mg-xCa alloys.

Chuanzhong Chen, H. Cui, Rui Feng, 2018, Biointerphases.

Characterization and biodegradation behavior of micro-arc oxidation coatings formed on Mg–Zn–Ca alloys in two different electrolytes

Chuanzhong Chen, Yaokun Pan, J. Dou, 2016 .

Formation of calcium phosphate coating on Mg-Zn-Ca alloy by micro-arc oxidation technique

Chuanzhong Chen, Xihua Zhang, Huijun Yu, 2016 .

Effect of deep cryogenic treatment on the microstructure and corrosion behavior of the microarc oxidized Mg-2.0Zn-0.5Ca alloy

Tao Yang, H. Cui, Rui Feng, 2020, Journal of Materials Research and Technology.

Structure and in vitro bioactivity of ceramic coatings on magnesium alloys by microarc oxidation

Chuanzhong Chen, Huijun Yu, Yaokun Pan, 2016 .

Preparation of Si-containing oxide coating and biomimetic apatite induction on magnesium alloy

Chuanzhong Chen, Huijun Yu, Yaokun Pan, 2016 .

Effect of current density on the microstructure and corrosion resistance of microarc oxidized ZK60 magnesium alloy.

Chuanzhong Chen, Huijun Yu, Yaokun Pan, 2014, Biointerphases.

Effect of CO2 on the microstructure and corrosion mechanism of Mg-Nd-Zn-Ca plasma electrolytic oxidation coatings

Haiyang Li, X. Fang, H. Cui, 2023, Materials Today Communications.

Study about improving mechanism of electrical conductivity of AA1070Al treated by a novel composite boron treatment with trace Ti

H. Cui, Xiaoli Cui, Rui Feng, 2021, Journal of Alloys and Compounds.

Evolution of grain boundary character distributions in a cold-deformed Nickel-based superalloy during electropulsing treatment

Huiping Li, Jianfeng Qiu, Shengxue Qin, 2020 .

Effect of addition of small amounts of samarium on microstructural evolution and mechanical properties enhancement of an as-extruded ZK60 magnesium alloy sheet

Lili Chang, Tiantian Zhang, H. Cui, 2020 .

Effect of grain boundaries and crystal orientation on etching behavior of 12 μm thick rolled copper foil

Rui Feng, Yaokun Pan, Yongxiao Wang, 2022, Materials Today Communications.

Investigation of interface microstructure and properties of copper/304 stainless steel fabricated by explosive welding

Rui Feng, Yaokun Pan, Jiaquan Li, 2022, Journal of Materials Research and Technology.

Influence of Mg and Si content and heat treatment on electrical conductivity and hardness of AA6101 Al alloy

Jie Liu, H. Cui, Xiaoli Cui, 2023, Journal of Materials Science.

Study on the improvement and mechanism of AA6101 electrical conductivity by trace TM (Zr, V, Ti) elements-assisted boron treatment

J. Liu, Hui Li, H. Cui, 2023, Journal of Alloys and Compounds.

Effect of ultrasonic field on the mechanism of electrodeposited Cunucleation and growth

Zhengfeng Zhang, Rui Feng, Yaokun Pan, 2023, Journal of Materials Research and Technology.

Electrodeposition preparation and electrochemical properties of silicon anode

Yaokun Pan, Benkui Gong, Min Feng, 2024, Materials Today Communications.

Effect of zinc content on the microstructure, in vitro bioactivity, and corrosion behavior of the microarc oxidized Mg-xZn-0.6Ca (x = 3.0, 4.5, 6.0) alloy.

H. Cui, Xiaoli Cui, Rui Feng, 2021, Biointerphases.

Improving corrosion and wear resistances of 2195 Al–Li alloy by PEO and LDHs composite coating

Yaokun Pan, Xiao Xu, Hui Li, 2023, Journal of Materials Research and Technology.