J. Todt

发表

Surface oxidation of nanocrystalline CVD TiB2 hard coatings revealed by cross-sectional nano-analytics and in-situ micro-cantilever testing

C. Mitterer, J. Zalesak, M. Tkadletz, 2020 .

Nanoscale evolution of stress concentrations and crack morphology in multilayered CrN coating during indentation: Experiment and simulation

J. Zalesak, W. Ecker, J. Keckes, 2020 .

Al-rich cubic Al0.8Ti0.2N coating with self-organized nano-lamellar microstructure: Thermal and mechanical properties

C. Mitterer, R. Pitonak, J. Zalesak, 2016 .

Superior oxidation resistance, mechanical properties and residual stresses of an Al-rich nanolamellar Ti0.05Al0.95N coating prepared by CVD

M. Burghammer, R. Pitonak, B. Sartory, 2014 .

Investigation of high cyclic fatigue behaviour of thin copper films using MEMS structure

J. Keckes, A. Hofer, M. Lederer, 2019, International Journal of Fatigue.

Influence of Gradient Residual Stress and Tip Shape on Stress Fields Inside Indented TiN Hard Coating

J. Zalesak, J. Keckes, J. Todt, 2021, Advanced Engineering Materials.

X-ray nanodiffraction analysis of stress oscillations in a W thin film on through-silicon via

M. Burghammer, B. Sartory, J. Keckes, 2016, Journal of applied crystallography.

X-ray nanodiffraction reveals stress distribution across an indented multilayered CrN–Cr thin film

M. Burghammer, C. Mitterer, D. Kiener, 2015 .

Au–Sn solders applied in transient liquid phase bonding: Microstructure and mechanical behavior

G. Dehm, C. Kirchlechner, G. Langer, 2019 .

Thermodynamic instability of a nanocrystalline, single-phase TiZrNbHfTa alloy and its impact on the mechanical properties

N. Schell, A. Hohenwarter, Jiehua Li, 2018 .

Anisotropy of fracture toughness in nanostructured ceramics controlled by grain boundary design

C. Mitterer, J. Zalesak, J. Keckes, 2019, Materials & Design.

Gradients of microstructure, stresses and mechanical properties in a multi-layered diamond thin film revealed by correlative cross-sectional nano-analytics

M. Burghammer, J. Zalesak, H. Sternschulte, 2019, Carbon.

Influence of Annealing on Microstructure and Mechanical Properties of a Nanocrystalline CrCoNi Medium-Entropy Alloy

N. Schell, A. Hohenwarter, J. Todt, 2018, Materials.

Annealing effects on the film stress and adhesion of tungsten-titanium barrier layers

S. Wöhlert, D. Többens, M. J. Cordill, 2017 .

Ion irradiation-induced localized stress relaxation in W thin film revealed by cross-sectional X-ray nanodiffraction

A. Macková, M. Burghammer, J. Zalesak, 2021 .

Thermal expansion of rock-salt cubic AlN

H. Böhm, F. Rammerstorfer, Liangcai Zhou, 2015 .

Manufacturing of Textured Bulk Fe-SmCo5 Magnets by Severe Plastic Deformation

R. Pippan, S. Wurster, H. Krenn, 2022, Nanomaterials.

Biomimetic hard and tough nanoceramic Ti-Al-N film with self-assembled six-level hierarchy.

M. Burghammer, N. Schell, A. Stark, 2019, Nanoscale.

X-Ray Nanodiffraction Analysis of Residual Stresses in Polysilicon Electrodes of Vertical Power Transistors

M. Burghammer, J. Zalesak, O. Blank, 2022, Materialia.

30 nm X-ray focusing correlates oscillatory stress, texture and structural defect gradients across multilayered TiN-SiOx thin film

M. Burghammer, C. Mitterer, J. Zalesak, 2018 .

Multi-scale interface design of strong and damage resistant hierarchical nanostructured materials

J. Zalesak, J. Keckes, R. Daniel, 2020 .

Axially and radially inhomogeneous swelling in commercial 18650 Li-ion battery cells

T. Zikmund, J. Kaiser, A. Břínek, 2022, Journal of Energy Storage.

Integrated experimental and computational approach for residual stress investigation near through-silicon vias

J. Kraft, F. Schrank, J. Keckes, 2016 .

In-situ Observation of Cross-Sectional Microstructural Changes and Stress Distributions in Fracturing TiN Thin Film during Nanoindentation

C. Mitterer, B. Sartory, W. Ecker, 2016, Scientific Reports.

Nanostructured Coatings for Tooling Applications

R. Pitonak, J. Keckes, J. Todt, 2015 .

Nanoscale stress distributions and microstructural changes at scratch track cross-sections of a deformed brittle-ductile CrN-Cr bilayer

J. Zalesak, S. Niese, W. Ecker, 2020 .

Extraordinary high-temperature behavior of electrically conductive Hf7B23Si22C6N40 ceramic film

P. Zeman, Yi Shen, Jiechao Jiang, 2020, Surface and Coatings Technology.

Graded Inconel-Stainless Steel Multi-Material Structure by Inter- and Intralayer Variation of Metal Alloys

J. J. Saurwalt, J. Todt, M. Meindlhumer, 2022, Journal of Materials Research and Technology.

Evolution of stress fields during crack growth and arrest in a brittle-ductile CrN-Cr clamped-cantilever analysed by X-ray nanodiffraction and modelling

J. Zalesak, J. Keckes, R. Daniel, 2021, Materials & Design.

Residual Stress Distribution of a Locally and Inductively Quenched and Tempered 50crmo4 Steel Analysed by Synchrotron Transmission Techniques

E. Maawad, R. Ebner, P. Raninger, 2022, SSRN Electronic Journal.

Combining hardness measurements of a heat-treated crankshaft bearing with cross-sectional residual stress and retained austenite distributions measured by HEXRD

E. Maawad, J. Keckes, P. Raninger, 2022, Materials Today Communications.

Macroscopic Fracture Behaviour of CrN Hard Coatings Evaluated by X-Ray Diffraction Coupled with Four-Point Bending

C. Mitterer, J. Keckes, R. Daniel, 2013 .

Complementary High Spatial Resolution Methods in Materials Science and Engineering

C. Teichert, C. Mitterer, Zaoli Zhang, 2017 .

X-ray analysis of residual stress gradients in TiN coatings by a Laplace space approach and cross-sectional nanodiffraction: a critical comparison

M. Burghammer, W. Ecker, J. Keckes, 2013, Journal of applied crystallography.

Investigation of the microstructure of a graded ZrN/Ti0.33Al0.67N multilayer coating using cross-sectional characterization methods

M. Burghammer, J. Zalesak, N. Schalk, 2022, Surface and Coatings Technology.

A combinatorial X-ray sub-micron diffraction study of microstructure, residual stress and phase stability in TiAlN coatings

C. Mitterer, B. Sartory, J. Keckes, 2014 .

Phase Decomposition of a Single‐Phase AlTiVNb High‐Entropy Alloy after Severe Plastic Deformation and Annealing

Benjamin Schuh, Bernhard Völker, Anton Hohenwarter, 2017 .

Gradient residual strain and stress distributions in a high pressure torsion deformed iron disk revealed by high energy X-ray diffraction

P. Staron, A. Hohenwarter, J. Keckes, 2018 .

An investigation on shear banding and crystallographic texture of Ag–Cu alloys deformed by high-pressure torsion

R. Pippan, U. Lienert, J. Keckes, 2019 .

Inconel-steel multilayers by liquid dispersed metal powder bed fusion: Microstructure, residual stress and property gradients

J. J. Saurwalt, N. Schell, J. Zalesak, 2020, Additive Manufacturing.

Microstructure and stress gradients in TiW thin films characterized by 40 nm X-ray diffraction and transmission electron microscopy

J. Todt, M. Rosenthal, J. Keckes, 2019 .

Indentation response of a superlattice thin film revealed by in-situ scanning X-ray nanodiffraction

J. Todt, M. Bartosik, C. Krywka, 2020 .

Mono-textured nanocrystalline thin films with pronounced stress-gradients: On the role of grain boundaries in the stress evolution

C. Mitterer, B. Sartory, J. Keckes, 2014 .

Manufacturing size effect on the structural and mechanical properties of additively manufactured Ti-6Al-4V microbeams

S. Hiermaier, C. Eberl, G. Ganzenmüller, 2023, Journal of Materials Science & Technology.

Effect of pulse-current-based protocols on the lithium dendrite formation and evolution in all-solid-state batteries

V. Hennige, Yuan‐Ming Chiang, C. Fincher, 2023, Nature communications.

Nanoscale residual stress and microstructure gradients across the cutting edge area of a TiN coating on WC Co

C. Mitterer, J. Keckes, R. Daniel, 2020 .

Intragranular Thermal Fatigue of Cu Thin Films: Near-Grain Boundary Hardening, Strain Localization and Voiding

C. Yildirim, I. Greving, C. Detlefs, 2023, Acta Materialia.

High resolution residual stress gradient characterization in W/TiN-stack on Si(100): Correlating in-plane stress and grain size distributions in W sublayer

J. Kraft, B. Sartory, J. Keckes, 2017 .

Ti40Zr10Cu36Pd14 bulk metallic glass as oral implant material

A. Lassnig, Ziba Najmi, A. Cochis, 2023, Materials & Design.