P. Cao

发表

Prediction of straight tooth milling of Scots pine wood by shank cutter based on neural net computations and regression analysis

J. Gu, P. Cao, Jiali Gu, 2022, BioResources.

Machinability investigation in turning of high density fiberboard

M. Ekevad, Zhenzeng Wu, P. Cao, 2018, PloS one.

EFFECT OF AVERAGE CHIP THICKNESS AND CUTTING SPEED ON CUTTING FORCES AND SURFACE ROUGHNESS DURING PERIPHERAL UP MILLING OF WOOD FLOUR/POLY VINYL CHLORIDE COMPOSITE

L. Cristovão, M. Ekevad, Anders Grönlund, 2015 .

Assessment of Cutting Forces and Temperature in Tapered Milling of Stone–Plastic Composite Using Response Surface Methodology

P. Cao, Zhaolong Zhu, Dietrich Buck, 2020, JOM.

Cutting forces and chip formation revisited based on orthogonal cutting of Scots pine

M. Ekevad, P. Cao, Zhaolong Zhu, 2018, Holzforschung.

Machinability of Luxury Vinyl Tiles during Plain Milling Using a Helical Cutter

Fan Zhang, P. Cao, Zhaolong Zhu, 2019, Materials.

Experimental and Numerical Study of Moisture-induced Stress Formation in Hexagonal Glulam Using X-ray Computed Tomography and Finite-element Analysis

W. Xu, M. Ekevad, P. Cao, 2018, BioResources.

Effects of Decorative Veneer and Structure on the Thermal Conductivity of Engineered Wood Flooring

P. Cao, X. Guo, Jie Wang, 2015 .

Warping and Surface Checking Analysis of Engineered Wood Flooring for Heating Systems

P. Cao, X. Guo, Jie Wang, 2015 .

Effect of rake angle on cutting performance during machining of stone-plastic composite material with polycrystalline diamond cutters

M. Ekevad, P. Cao, Zhaolong Zhu, 2019, Journal of Mechanical Science and Technology.

RESEARCH ON CUTTING FORCES AND CUTTING TEMPERATURE IN ORTHOGONAL CUTTING SOFTWOOD AND HARDWOOD PARALLEL TO GRAIN

P. Cao, X. Guo, M. Deng, 2018, Wood and Fiber Science.

Forces and Heat Variation Laws of Pine Materials Processing and Microcosmic Characteristics of Surface Damage

P. Cao, Zhaolong Zhu, X. Guo, 2018, BioResources.

Pressure, Feed Rate, and Abrasive Mass Flow Rate Influence on Surface Roughness for Recombinant Bamboo Abrasive Water Jet Cutting

M. Ekevad, P. Cao, X. Guo, 2015 .

Effect of Pressure, Feed Rate, and Abrasive Mass Flow Rate on Water Jet Cutting Efficiency When Cutting Recombinant Bamboo

M. Ekevad, P. Cao, X. Guo, 2014 .

The cutting performance of Al2O3 and Si3N4 ceramic cutting tools in the milling plywood

Mats Ekevad, Zhaolong Zhu, Pingxiang Cao, 2018 .

The effects of cutting parameters and tool geometry on cutting forces and tool wear in milling high-density fiberboard with ceramic cutting tools

Mats Ekevad, Bin Na, Zhaolong Zhu, 2017 .

Investigation of Surface Integrity Up-Milling Magnesium Oxide Particle Reinforced Wood-Based Composite

P. Cao, Zhaolong Zhu, Jinxin Wang, 2023, International Journal of Precision Engineering and Manufacturing.

Effect of Cutting Speed on Machinability of Stone–Plastic Composite Material

M. Ekevad, P. Cao, Dietrich Buck, 2019, Science of Advanced Materials.

Bound Water Content and Pore Size Distribution in Swollen Cell Walls Determined by NMR Technology

P. Cao, Juwan Jin, Xin Gao, 2015 .

Evaluation of Mechanical Properties of Reinforced Poplar Laminated Veneer Lumber

P. Cao, Jie Wang, Wei Zhong, 2015 .

Cutting performance of cemented carbide cutting tool in turning high‐density fiberboard

M. Ekevad, P. Cao, X. Qiu, 2018, Materialwissenschaft und Werkstofftechnik.

Cutting performance in the helical milling of stone-plastic composite with diamond tools

P. Cao, Dietrich Buck, Jinxin Wang, 2020 .

Non-standard test method for glue line shear strength

W. Xu, M. Ekevad, P. Cao, 2017 .

Effect of Process Parameters on Cutting Forces and Surface Roughness during Peripheral Up Milling of Bamboo Scrimber

Jie Wang, Xue Hong, Wang Baojin, 2015 .

Cutting Forces and Chip Morphology during Wood Plastic Composites Orthogonal Cutting

Mats Ekevad, Anders Grönlund, Birger Marklund, 2014 .

High-quality and high-efficiency machining of stone-plastic composite with diamond helical cutters

P. Cao, Dietrich Buck, Xiaolei Guo, 2020 .

Energy Efficiency Optimization for Machining of Wood Plastic Composite

P. Cao, Dietrich Buck, Xian-qing Xiong, 2022, Machines.

EFFECTS OF SURFACE TREATMENT ON THE PROPERTIES OF UV COATING

P. Cao, Rongrong Li, Xiaolei Guo, 2015 .

Optimization of Laser Cutting Parameters for Recombinant Bamboo Based on Response Surface Methodology

Jing Ouyang, P. Cao, Rongrong Li, 2016 .

Research on the orthogonal cutting performance of polyethylene-based wood-plastic composite based on principal component analysis

P. Cao, Jinxin Wang, Zhanwen Wu, 2022, European Journal of Wood and Wood Products.

Tool Wear and Machined Surface Roughness during Wood Flour/Polyethylene Composite Peripheral Up-milling using Cemented Tungsten Carbide Tools

Mats Ekevad, Anders Grönlund, Birger Marklund, 2014 .

A Novel Sawing Method for Small-Diameter Log

M. Ekevad, P. Cao, Rongrong Li, 2015 .

Investigation of the orthogonal cutting of wood-plastic composites for obtaining better stability and quality

P. Cao, Jinxin Wang, Zhanwen Wu, 2022, European Journal of Wood and Wood Products.

Cutting Forces and Chip Morphology in Medium Density Fiberboard Orthogonal Cutting

Wang Baojin, P. Cao, Ding Jianwen, 2014 .

Performance of stone-plastic composites with different mix ratios during orthogonal cutting

M. Ekevad, P. Cao, Dietrich Buck, 2019, Materials Express.

Effects of Spindle Speed on Surface Qualities in WPC Sawing

Yong Guo, Wei Gao, P. Cao, 2010 .

Investigation of Glueline Shear Strength of Pine Wood Bonded with PVAc by Response Surface Methodology

M. Ekevad, P. Cao, Rongrong Li, 2015 .

Milling performance of stone‐plastic composite with diamond cutters

P. Cao, Z. Wu, J. Ding, 2021, Materialwissenschaft und Werkstofftechnik.

Investigation of Shear Strength of Engineered Wood Flooring Bonded with PUR by Response Surface Methodology

P. Cao, Rongrong Li, Futang Ji, 2017 .

Architectural (decorative) natural fiber composites for construction

P. Cao, Rongrong Li, Xiaolei Guo, 2017 .

The researches concern the influence of the helix angle on the composite machining process

P. Cao, Jinxin Wang, Yu Gao, 2021, Composites and Advanced Materials.

Cutting Force and Cutting Quality during Tapered Milling of Glass Magnesium Board

Chi Zhang, Zhaolong Zhu, Xiaolei Guo, 2019, Applied Sciences.