Jinwen Ye

发表

Synthesis of (Cr,V)2(C,N) solid solution powders by thermal processing precursors

Y. Liu, A. Liu, Shiqing Ma, 2017 .

Superior soft magnetic properties and mechanical strength in nanocomposites employing a double-percolating microstructure

Y. Liu, V. Harris, Jun Li, 2019, Journal of Alloys and Compounds.

Influence of Ce–Co pre-alloyed powder addition on the microstructure and mechanical properties of Ti(C, N)-based cermets

Y. Liu, Jinwen Ye, G. Zhu, 2013 .

Synthesis of (Ti, W, Mo, Ta, Cr)(C, N) solid solution powders by carbothermal reduction-nitridation in an open system

Y. Liu, A. Liu, Pengcheng Rong, 2017 .

Fabrication of rod-like Ti4O7 with high conductivity by molten salt synthesis

Y. Liu, Jinwen Ye, Guan-jun Wang, 2017 .

Synthesis, microstructural characterization, and electrochemical performance of novel rod-like Ti4O7 powders

Y. Liu, Jinwen Ye, Guan-jun Wang, 2017 .

Evaluating the Barriers to Industrial Symbiosis Using a Group AHP-TOPSIS Model

R. Cote, Tian Yang, Changhao Liu, 2022, Sustainability.

Microwave sintering of TiCN-based cermets prepared from electroless Co-coated (Ti, W, Mo, V)CN powders

Y. Liu, Jie Wang, Jinwen Ye, 2017, Rare Metals.

The formation mechanism of the chill fine-grain layer with high supersaturation and its influence on the mechanical properties of die casting Al-7Si-0.5Mg alloy

Jinwen Ye, Jeff Wang, Guodong Niu, 2021, Materials Science and Engineering: A.

Synthesis of VC nanopowders by thermal processing of precursor with CaF2 addition

Y. Liu, Zhiwei Zhao, Jinwen Ye, 2010 .

A novel method to synthesize vanadium carbide (V8C7) nanopowders by thermal processing NH4VO3, C6H12O6 and urea

M. Tu, Zhiwei Zhao, Jinwen Ye, 2009 .

Investigation of fabrication of Ti4O7 by carbothermal reduction in argon atmosphere and vacuum

Y. Liu, Xiaolei Li, Jinwen Ye, 2016, Journal of Materials Science: Materials in Electronics.

Temperature effect on electrochemical properties of Ti4O7 electrodes prepared by spark plasma sintering

Y. Liu, Xiaolei Li, Ruijie Zhu, 2015, Journal of Materials Science: Materials in Electronics.

Electromagnetic Wave Absorption Properties of RE-Fe Nanocomposites

Y. Liu, Jinwen Ye, L. Lian, 2011 .

Phase transition and microstructure evolution during the carbothermal preparation of Ti(C,N) powders in an open system

Y. Liu, Yifan Liu, M. Tu, 2010 .

Mechanical properties and electronic structures of VC, V4C3 and V8C7 from first principles

Y. Liu, Jinwen Ye, Bin Wang, 2013 .

Mechanical properties and electronic structure of TiC, Ti0.75W0.25C, Ti0.75W0.25C0.75N0.25, TiC0.75N0.25 and TiN

Yan Liu, Jinwen Ye, Bin Wang, 2012 .

Study on the phase evolution, microstructure and densification behavior of (Ti,M)(C,N)-based cermets

Xiaojiao Yang, Y. Liu, Jinwen Ye, 2020 .

Magnéli phase Ti4O7 powder from carbothermal reduction method: formation, conductivity and optical properties

Y. Liu, Xiaoyan Zhang, Ruijie Zhu, 2013, Journal of Materials Science: Materials in Electronics.

A novel method to synthesize vanadium carbonitride nanopowders by thermal processing precursor

Y. Liu, Jinwen Ye, Zhenghua Tang, 2009 .

Fabrication of in-situ TiC–TiB2 reinforced Al foam with enhanced properties

Jinwen Ye, Y. Liu, Xun Li, 2020 .

Synthesis of VN nanopowders by thermal nitridation of the precursor and their characterization

M. Tu, Zhiwei Zhao, Jinwen Ye, 2008 .

Electrochemical degradation of azo dye methyl orange by anodic oxidation on Ti4O7 electrodes

Y. Liu, Jinwen Ye, Guan-jun Wang, 2018, Journal of Materials Science: Materials in Electronics.

Preparation of (Cr1-x, Mox)2(C, N) infinite solid solution powders

Y. Liu, Shiqing Ma, Jinwen Ye, 2020 .

Al2O3 aerogel coating modified TiH2 to enhance the mechanical properties of aluminum foam

Y. Liu, Xiaojiao Yang, Jinwen Ye, 2019, Materials Research Express.

Preparation and crystal structure of ζ-Cr2(C,N) powders

Lei Xie, Y. Liu, Jinwen Ye, 2019, Journal of Materials Science.

Effects of Nitrogen Atmosphere on Microstructure and Mechanical Properties of Ti(C0.5N0.5)-based Cermets

Ying Liu, Yuchong Qiu, Jinwen Ye, 2019, Journal of Wuhan University of Technology-Mater. Sci. Ed..

Synthesis of (Ti, W, Mo, V)(C, N) powders by carbothermal reduction–nitridation with NH4HCO3 addition

Y. Liu, Haijun Yu, Jinwen Ye, 2014 .

Study on the formation of core–rim structure in Ti(CN)-based cermets

Y. Liu, Haijun Yu, Jinwen Ye, 2012 .

Effect of (Ti, W, Mo, V)(C, N) powder size on microstructure and properties of (Ti, W, Mo, V)(C, N)-based cermets

Y. Liu, Haijun Yu, Yunfeng Zhu, 2012 .

Insight into the stability in cation substitution of Magnéli phase Ti4O7

Jinwen Ye, Wenyu Cheng, Xin Tian, 2022, Applied Physics Letters.

Preparation of titanium through the electrochemical reducing Ti4O7 in molten calcium chloride

Y. Liu, Jinwen Ye, Fan Yang, 2018, Materials Letters.

Process and quasi-static compressive properties of highly porous palladium bulks

Y. Liu, M. Li, Jun Li, 2008 .

Effects of (Ti,Ta,Nb,W)(C,N) on the microstructure, mechanical properties and corrosion behaviors of WC-Co cemented carbides

Y. Liu, Yuchong Qiu, Jinwen Ye, 2017 .

Effect of NbC on the microstructure and sinterability of Ti(C0.7, N0.3)-based cermets

Y. Liu, Jun Wang, M. Tu, 2009 .

Fabrication and properties of Ti(C,N)-based cermets with multi-component AlCoCrFeNi high-entropy alloys binder

Y. Liu, Jinwen Ye, G. Zhu, 2013 .

Theoretical study on the elastic, electronic and thermodynamic properties of trigonal-type Cr2N under high pressures

Y. Liu, Shiqing Ma, Jinwen Ye, 2014 .

Synthesis of ultrafine (Ti, W, Mo, V)(C, N)–Ni composite powders by low-energy milling and subsequent carbothermal reduction–nitridation reaction

Yuehan Liu, Yongzhong Jin, Jinwen Ye, 2009 .

Fabrication of Ti4O7 electrodes by spark plasma sintering

Y. Liu, Xiaoyan Zhang, Ruijie Zhu, 2014 .

Two-step synthesis of TiC0.7N0.3@WC-MoC2 core-shell microspheres and fabrication of TiC0.7N0.3@WC-MoC2-based cermets by SPS

Y. Liu, Haijun Yu, Yongzhong Jin, 2011 .

Electrochemical oxidation of methyl orange by a Magnéli phase Ti4O7 anode.

Yuanfang Liu, Xiaojiao Yang, Zifeng Lin, 2020, Chemosphere.

The fabrication of multi-core structure cermets based on (Ti,W,Ta)CN and TiCN solid-solution powders

Y. Liu, Jie Wang, Shiqing Ma, 2017 .

Grain Refining Efficiency of SHS Al–Ti–B–C Master Alloy for Pure Aluminum and Its Effect on Mechanical Properties

Lin-zhi Wang, Y. Liu, Jinwen Ye, 2016, Acta Metallurgica Sinica (English Letters).

Early high-temperature oxidation behavior of Ti(C,N)-based cermets with multi-component AlCoCrFeNi high-entropy alloy binder

Y. Liu, Jinwen Ye, G. Zhu, 2014 .

Effect of carbon source on the carbothermal reduction nitridation for synthesis of (Ti, W, Mo, V)(C, N) nanocrystalline powders

Yongzhong Jin, Jinwen Ye, Y. Liu, 2011 .

Effects of Nano Wc and Cr3c2 on Grain Growth, Microstructure and Mechanical Properties of Ultra-Coarse Cemented Carbides

Jinwen Ye, Ying Liu, Han Wang, 2022, SSRN Electronic Journal.

The synthesis and gas sensitivity of the β-Ti3O5 powder: Experimental and DFT study

Y. Liu, Xiaoyan Zhang, L. Xiaolei, 2015 .

Synthesis of Bimetallic Carbonitrides (V0.8Ti0.2)(C,N) and its Application as a Grain Refiner

Y. Liu, Yunfeng Zhu, Xin Meng, 2012, Metallurgical and Materials Transactions B.

Electronic, magnetic and elastic properties of Mo2FeB2: First-principles calculations

Y. Liu, Jinwen Ye, Bin Wang, 2013 .

First-Principle Investigation of the Stability and Mechanical Properties of the Binder Phase B (B=Co and Ni) with the Maximum Solubility of the Transition-Group Elements M (M=V, Ti, Ta, Mo, W and Cr)

Jinwen Ye, Na Jin, Beilin Ouyang, 2022, SSRN Electronic Journal.

The effects of nitrogen on the stability, elastic properties and electronic structure of Ti(CxN1−x): A first principles investigation

Y. Liu, Jinwen Ye, Na Jin, 2021 .

First-principles study on the effects of N and Al doping on the mechanical properties and electronic structures of TiC

Y. Liu, Jinwen Ye, Xu Du, 2020, RSC advances.

Mechanical Properties and Electronic Structure of N and Ta Doped TiC: A First-Principles Study

Y. Liu, Shiqing Ma, Jinwen Ye, 2014 .

Effects of porosity on the electrochemical oxidation performance of Ti4O7 electrode materials

Y. Liu, Zifeng Lin, Jinwen Ye, 2023, Ceramics International.

Enhancing strength and electrical conductivity of pure aluminum by microalloying with telluride

Jinwen Ye, Lufei Yang, Jiteng Zhang, 2021 .

Molten salt synthesis and growth mechanism of WC platelet powders

Y. Liu, Jinwen Ye, Guan-jun Wang, 2017 .

Sliding wear behaviour of Fe/316L/430-Ti(C,N) composites prepared via spark plasma sintering and subsequent heat treatment

Jinwen Ye, Renquan Wang, Y. Liu, 2021, International Journal of Minerals, Metallurgy and Materials.

Effect of secondary carbides addition on the microstructure and mechanical properties of (Ti, W, Mo, V)(C, N)-based cermets

Y. Liu, Haijun Yu, Yongzhong Jin, 2011 .

Influence factors and microstructure evolution during preparation of nanocrystalline (Ti, W, Mo, V)(C, N)―Ni composite powders

Yongzhong Jin, Jinwen Ye, Y. Liu, 2009 .

A separation between oxygen removal and phase transition: A new path for preparing nano-scale tungsten carbide powder

Yifan Kong, Jinwen Ye, Jingxue Li, 2021 .

Ultrafine (Ti, M)(C, N)-based cermets with optimal mechanical properties

Haijun Yu, Yuehan Liu, Yongzhong Jin, 2011 .

Formation mechanism of Ti 4 O 7 phase prepared by carbothermal reduction reaction

Xiaojiao Yang, Zifeng Lin, Y. Liu, 2020 .

The enhancement of the microstructure and mechanical performances of ultrafine WC-Co cemented carbides by optimizing Cr2(C,N) addition and WC particle sizes

Y. Liu, Ding Li, Xianfu Chen, 2021 .

Microstructure and mechanical properties improvements in cemented carbides by (Cr,Mo,Ta)2(C,N) inhibitors

Y. Liu, Jinwen Ye, Shiqing Ma, 2020, Rare Metals.

Effect of (Cr0.8V0.2)2(C,N) addition on microstructure and mechanical properties of WC–8Co cemented carbides

Y. Liu, M. Li, Yunfeng Zhu, 2014 .

Grain refining performance of Al–Ti(C0.7, N0.3) master alloy and its effect on mechanical properties for commercial pure aluminium

Y. Liu, Lin-zhi Wang, Jinwen Ye, 2016 .

Effect of VC and nano-TiC addition on the microstructure and properties of micrometer grade Ti(CN)-based cermets

Jun Wang, Y. Liu, M. Tu, 2009 .

Microstructure and magnetic properties of Sm2Fe17Nx compound and their magnets prepared by field-activated combustion

Y. Liu, M. Tu, Jinwen Ye, 2007 .

Effect of Nb substitution on the temperature characteristics and microstructures of rapid-quenched NdFeB alloy

Y. Liu, Jinwen Ye, Yilong Ma, 2007 .

Fluidity of casting Al–Si series alloys for automotive light-weighting: a systematic review

Jinwen Ye, Yu Wang, J. Mao, 2022, Materials Science and Technology.

Nacre‐Inspired, Efficient, and Multifunctional Soft Magnetic Composites by Cold Sintering Design

Y. Liu, Huaiwu Zhang, Jiao Du, 2021, Advanced Engineering Materials.

Synthesis of (Ti, W, Mo, V)(C, N) nanocomposite powder from novel precursors

Yongzhong Jin, Jinwen Ye, Y. Liu, 2010 .

Study on phase evolution during reaction synthesis of ultrafine (Ti, W, Mo, V)(CN)-Ni composite powders

Yuehan Liu, Yongzhong Jin, Jinwen Ye, 2009 .

Effect of Cr Substitution on Thermal Stability of Magnetization and Oxidation Resistance of SmFeN Compounds

Xianfu Chen, M. Tu, Jinwen Ye, 2008, IEEE Transactions on Magnetics.

Could λ-Ti3O5 with lamellar and channel microstructure characteristics determine the excellent properties of LIBs? The first-principles study of λ-Ti3O5 lithiation mechanism

Y. Liu, Pengjun Xiao, Jinwen Ye, 2022, Materials Today Communications.

Preparation and electromagnetic wave absorption properties of Sm2O3/α-Fe/Sm2Fe17Nx composites

Y. Liu, Xianfu Chen, Jinwen Ye, 2013 .

Microwave electromagnetic and absorption properties of SmN/α-Fe/Sm2Fe17N3 composites in 0.5–18GHz range

Y. Liu, Xianfu Chen, Jinwen Ye, 2012 .

Structural change in Sm2Fe17 alloys during homogenization and HD processing

Y. Liu, M. Li, M. Tu, 2007 .

Preparation of isotropic Sm2Fe17Nx magnetic powders and their bonded magnets

Y. Liu, M. Li, M. Tu, 2006 .

Enhanced mechanical properties and formability of 316L stainless steel materials 3D-printed using selective laser melting

Y. Liu, Jinwen Ye, Renquan Wang, 2019, International Journal of Minerals, Metallurgy and Materials.

Preparation and dynamic deuterium gas loading of highly porous palladium bulks

Y. Liu, M. Li, Jun Li, 2007 .

Microstructure evolution and decomposition behavior of an novel core-multi-shell structure TiH2 foaming agent

Y. Liu, Q. Kong, Jinwen Ye, 2022, Advanced Powder Technology.

Innovative surface modification of TiH2 to fabricate aluminum foam with enhanced mechanical properties

Y. Liu, Jinwen Ye, An Xuguang, 2018 .

A gas-solid reaction growth of dense TiO2 nanowire arrays on Ti foils at ambient atmosphere.

Zongwei Mei, Zhishun Wei, X. Wen, 2012, Journal of nanoscience and nanotechnology.

Effect of Rapid Cooling on Microstructure and Properties of Nanocrystalline Wc-9%Co-Cr3c2-Vc Cemented Carbide

Xianfu Chen, Jinwen Ye, Ying Liu, 2022, SSRN Electronic Journal.

Synthesis, Characterization, and Consolidation of Cr2(C,N) Solid Solution Powders

Y. Liu, Jie Wang, A. Liu, 2016 .

Enhanced oxidation resistance of single crystal tungsten powder by forming tungsten carbide on the surface

Jun Yu Li, Jinwen Ye, 2023, International Journal of Refractory Metals and Hard Materials.

Synergistic optimization of carrier transport and thermal conductivity in Sn-doped Cu2Te

Y. Liu, Jun Li, Jinwen Ye, 2018 .

Facile rapid synthesis of a nanocrystalline Cu2Te multi-phase transition material and its thermoelectric performance

Y. Liu, Xiaojiao Yang, Jinwen Ye, 2017 .

Microstructure Evolution and Fluidity Study of Al–7Si–0.3Mg–0.3Ce Alloy with TiCN Nanoparticles Addition

Jianfeng Wang, Jinwen Ye, Yu Wang, 2022, Metallurgical and Materials Transactions A.

Synthesis of (V,Cr)(C,N) nanopowders via carbothermal reduction nitridation method: Influence factors and morphology evolution

Y. Liu, Jie Wang, A. Liu, 2016 .

A first principles investigation on the solid solution behavior of transition metal elements (W, Mo, Ta, Cr) in Ti(C,N)

Y. Liu, Jinwen Ye, Zhinan Cao, 2021 .

Enhanced high temperature mechanical properties of WC-Co cemented carbides by VC addition

Jinwen Ye, Ying Liu, Lu Wang, 2023, International Journal of Refractory Metals and Hard Materials.

High-Performance Electrochemical Degradation of Methylene Blue by a Ti4O7 Anode Prepared via Industrial Tailing Titanium Powder

Y. Liu, Jinwen Ye, Tingting Yuan, 2022, Journal of Electronic Materials.

3D modelling of the large-capacity ingots of an Al – Mg system aluminium alloy doped with scandium rolling process

Lin-zhi Wang, Jinwen Ye, Y. Liu, 2018 .

Microstructure and mechanical properties of WC–(Ti, M)(C, N)–Co cemented carbides with different nitrogen contents

Y. Liu, Jinwen Ye, Weibin Qiu, 2016, Rare Metals.