S. Rodil

发表

Is stress necessary to stabilise sp(3) bonding in diamond-like carbon (vol 11, pg 944, 2002)

J. Robertson, W. Milne, A. Ferrari, 2003 .

Density, sp 3 fraction, and cross-sectional structure of amorphous carbon films determined by x-ray reflectivity and electron energy-loss spectroscopy

J. Robertson, A. Ferrari, B. Tanner, 2000 .

Interpretation of infrared and Raman spectra of amorphous carbon nitrides

John Robertson, Andrea C. Ferrari, J. Robertson, 2003 .

Raman and infrared modes of hydrogenated amorphous carbon nitride

J. Robertson, W. Milne, A. Ferrari, 2001 .

Biocide effect against SARS-CoV-2 and ESKAPE pathogens of a noncytotoxic silver–copper nanofilm

J. Manzo-Merino, L. Rocha-Zavaleta, J. Bello-López, 2021, Biomedical materials.

Gas evolution studies for structural characterization of hydrogenated carbon nitride samples

J. Robertson, W. Milne, W. Beyer, 2003 .

Resonant Raman spectra of amorphous carbon nitrides: the G peak dispersion

J. Robertson, A. Ferrari, S. Rodil, 2003 .

Deposition of carbon nitride films using an electron cyclotron wave resonance plasma source

J. Robertson, W. Milne, N. Morrison, 2000 .

Surface Functionalization of Mesoporous Co3O4 and MnOx with Sodium for the Soot Oxidation Reaction

R. Zanella, S. Rodil, J. Medina, 2022, Topics in Catalysis.

Synthesis of a CeO2/Co3O4 catalyst with a remarkable performance for the soot oxidation reaction

R. Zanella, S. Rodil, S. Rodil, 2020 .

Paramagnetic defects in hydrogenated amorphous carbon powders

J. Robertson, Graham M. Smith, S. Rodil, 2003 .

Development and characterization of hydrophobic anodized aluminum layer to act as a long‐lasting protective film in corrosion

A. Covelo, S. Rodil, A. Ramírez-Reivich, 2018 .

Is stress necessary to stabilise sp3 bonding in diamond-like carbon?

J. Robertson, W. Milne, A. Ferrari, 2002 .

Ozone as an alternative decontamination process for N95 facemask and biosafety gowns

J. Bello-López, S. Rodil, B. Nogueda-Torres, 2021, Materials Letters.

Nitrogen Incorporation into Tetrahedral Hydrogenated Amorphous Carbon

J. Robertson, W. Milne, N. Morrison, 1999 .

Effect of graphitic inclusions on the optical gap of tetrahedral amorphous carbon films

J. Robertson, W. Milne, A. Ferrari, 2001 .

Chemical sputtering of ta-C: Implications for the deposition of carbon nitride

J. Robertson, W. Milne, N. Morrison, 2001 .

Antibacterial effect of bismuth subsalicylate nanoparticles synthesized by laser ablation

M. Flores-Castañeda, E. Camps, S. Rodil, 2015, Journal of Nanoparticle Research.

Influence of the ion energy on the structure of Bi and Fe2O3 thin films

L. Escobar-Alarcón, E. Camps, S. Rodil, 2013 .

Pulsed laser deposition and characterization of La1−xSrxMnO3

L. Escobar-Alarcón, E. Camps, I. Betancourt, 2012 .

The Preparation, Characterization and Tribological Properties of TA-C : H Deposited Using an Electron Cyclotron Wave Resonance Plasma Beam Source

J. Robertson, W. Milne, A. Ferrari, 1999 .

Deposition of ta-C:N:H as Function of Experimental Parameters

S. Muhl, S. Rodil, S. Rodil, 2004 .

High Rate Deposition of Ta-C:H Using an Electron Cyclotron Wave Resonance Plasma Source

I. Hutchings, J. Robertson, W. Milne, 1999 .

Role of sp2 phase in field emission from nanostructured carbons

J. Robertson, P. Milani, A. Ferrari, 2001 .

Maximized sp3 bonding in carbon nitride phases

J. Robertson, W. Milne, L. M. Brown, 2000 .

Microstructural behavior of the Ti–Al–Mo–N system controlled by Mo content: impact on the performance as hard coatings

D. Torres-Torres, D. A. Mazón-Montijo, A. Garay-Tapia, 2023, Journal of Materials Science.

Status of technology of carbon nitride films: challenges and opportunties

S. Rodil, 2006 .

Highest optical gap tetrahedral amorphous carbon

J. Robertson, W. Milne, E. Laurenti, 2002 .

Development and characterization of sealed anodizing as a corrosion protection for AA2024-T3 in saline media

A. Covelo, X. Nóvoa, S. Rodil, 2022, Materials Today Communications.