A. Álamo

发表

Assessment of ODS-14%Cr ferritic alloy for high temperature applications

M. Mathon, A. Álamo, V. Lambard, 2004 .

Development of an extensive database of mechanical and physical properties for reduced-activation martensitic steel F82H

Akira Kohyama, Ronald L. Klueh, G. R. Odette, 2002 .

Behavior of Different Austenitic Stainless Steels, Conventional, Reduced Activation (RA) and ODS Chromium-Rich Ferritic-Martensitic Steels Under Neutron Irradiation at 325°C in PWR Environment

F. Rozenblum, A. Álamo, X. Averty, 2001 .

Removal of pharmaceutical compounds from urban wastewater by an advanced bio-oxidation process based on fungi Trametes versicolor immobilized in a continuous RBC system

M. I. Pariente, I. Vasiliadou, R. Molina, 2018, Environmental Science and Pollution Research.

European cross-cutting research on structural materials for Generation IV and transmutation systems

C. Fazio, Michael Rieth, Lorenzo Malerba, 2009 .

Assessment of Trametes versicolor, Isochrysis galbana, and Purple Phototrophic Bacteria for the Removal of Pharmaceutical Compounds in Hospital Wastewater

M. I. Pariente, L. F. Bautista, G. Vicente, 2021, Advances in Environmental and Engineering Research.

Present development status of EUROFER and ODS-EUROFER for application in blanket concepts

E. Diegele, Anton Möslang, Michael Rieth, 2005 .

Plasticity of oxide dispersion strengthened ferritic alloys

C. Prioul, A. Álamo, D. François, 1993 .

Fissile core and Tritium-Breeding Blanket: structural materials and their requirements

M. Rieth, A. Álamo, J. Boutard, 2008 .

PERFORM 60: Prediction of the effects of radiation for reactor pressure vessel and in-core materials using multi-scale modelling – 60 years foreseen plant lifetime

Dominique Moinereau, David Lidbury, A. Alamo, 2011 .

Microstructure and Textures of Ods Ferritic Alloys Obtained by Mechanical Alloying

G. Pons, A. Álamo, J. Béchade, 1992 .

Tensile and impact properties of 9Cr tempered martensitic steels and ODS-FeCr alloys irradiated in a fast reactor at 325 °C up to 78 dpa

A. Alamo, J. Henry, J. Henry, 2011 .

Recent progress toward development of reduced activation ferritic/martensitic steels for fusion structural applications

Mikhail A. Sokolov, Ronald L. Klueh, G. R. Odette, 2009 .

Precipitation phenomena in the Mg-31 at% Li-1 at% Al alloy

A. Álamo, A. Banchik, 1980 .

Secondary recrystallization of oxide dispersion strengthened ferritic alloys

A. Álamo, H. Réglé, 1993 .

Production and annealing of point defects in electron-irradiated copper-gold alloys

G. Désarmot, A. Álamo, C. D. Novion, 1985 .

Mechanical properties of 9Cr martensitic steels and ODS-FeCr alloys after neutron irradiation at 325 °C up to 42 dpa

A. Alamo, A. Álamo, J. L. Bertin, 2007 .

Mechanical behavior of reduced-activation and conventional martensitic steels after neutron irradiation in the range 250–450°C

M. Rieth, A. Álamo, X. Averty, 2000 .

A SANS investigation of the irradiation-enhanced α–α′ phases separation in 7–12 Cr martensitic steels

Y. Carlan, G. Geoffroy, M. Mathon, 2003 .

Small Angle Neutron Scattering Study of Irradiated Martensitic Steels: Relation Between Microstructural Evolution and Hardening

Y. Carlan, M. Mathon, A. Álamo, 2005 .

Microstructural Evolution of Reduced Activation and Conventional Martensitic Steels after Thermal Aging and Neutron Irradiation

Y. Carlan, G. Geoffroy, M. Mathon, 2001 .

Displacement threshold energy determination for Cu3Au and CuAu ordered alloys

A. Álamo, M. Dirand, C. D. Novion, 1983 .

Pre- and post-irradiation mechanical properties of ferritic-martensitic steels for fusion applications: EM10 base metal and EM10/EM10 welds

P. Dubuisson, H. Touron, A. Álamo, 1994 .

Materials design data for reduced activation martensitic steel type EUROFER

H.-C. Schneider, E. Diegele, Konstantina Mergia, 2004 .

Physical metallurgy and mechanical behaviour of FeCrWTaV low activation martensitic steels: Effects of chemical composition

A. Álamo, J. Brachet, C. Lepoittevin, 1998 .

Heterogeneous austenite grain growth in 9Cr martensitic steels: influence of the heating rate and the austenitization temperature

C. Servant, A. Álamo, J. Brachet, 2003 .

Texture analysis of oxide dispersion strengthened (ODS) Fe alloys by X-ray and neutron diffraction

M. Mathon, V. Branger, A. Álamo, 2002 .

Effect of thermal aging on the microstructure and mechanical properties of 7–11 CrW steels

Y. Carlan, G. Geoffroy, M. Mathon, 2000 .

Structure of vacancy-ordered titanium heminitride δ'-Ti2N by powder neutron diffraction

J. Landesman, A. Álamo, A. N. Christensen, 1985 .

Jules Horowitz Reactor: a high performance material testing reactor

Daniel Iracane, Ana Alamo, Pascal Chaix, 2008 .

PERFORM 60 – Prediction of the effects of radiation for reactor pressure vessel and in-core materials using multi-scale modelling – 60 years foreseen plant lifetime

Dominique Moinereau, David Lidbury, Sylvain Leclercq, 2010 .

Positron annihilation studies on 9Cr reduced activation ferritic/martensitic steels

B. Raj, S. Saroja, G. Amarendra, 2009 .

Effects of thermal aging on the mechanical behavior of F82H weldments

A. Álamo, P. Wident, A. Castaing, 2000 .

Effects of the forming processes and Y2O3 content on ODS-Eurofer mechanical properties

A. Alamo, Y. Carlan, A. Álamo, 2009 .

Tube manufacturing trials by different routes in 9CrW-ODS martensitic steels

Shigeharu Ukai, A. Álamo, S. Ukai, 2004 .

Assessment of a cu-perovskite material in a heterogeneous electro-fenton process for the degradation of organic dyes contaminants in a wide range of ph

M. I. Pariente, R. Molina, F. Martínez, 2019 .

European Research on Heavy Liquid Metal Technology for Advanced Reactor Systems

Robert Stieglitz, C. Fazio, F. Groeschel, 2006 .

Behavior of Eurofer97 reduced activation martensitic steel upon heating and continuous cooling

A. Álamo, A. Danón, 2002 .

Fast Reactor Cores, Ferritic–Martensitic Steels for

A. Álamo, J. Brachet, J. Séran, 2001 .