A. Jeevanantham

发表

Effects of n-octanol as a fuel blend with biodiesel on diesel engine characteristics

B. Ashok, K. Nanthagopal, S. Balusamy, 2019, Fuel.

WEDM Parameter Optimization for Silicon@r-GO/Magneisum Composite Using Taguchi Based GRA Coupled PCA

T. Thankachan, K. Prakash, S. Nagaraja, 2019, Silicon.

Effect of Normalizing on the Tensile Strength, Shrinkage and Surface Roughness of PLA Plastic

S. Singh, A. Jeevanantham, A. Rajeshkannan, 2020 .

Effect of fuel injection strategies and EGR on biodiesel blend in a CRDI engine

B. Ashok, K. Nanthagopal, V. Karthickeyan, 2019, Energy.

An assessment of calophyllum inophyllum biodiesel fuelled diesel engine characteristics using novel antioxidant additives

B. Ashok, K. Nanthagopal, A. Jeevanantham, 2017 .

Optimal layout of a partially treated laminated composite magnetorheological fluid sandwich plate

R. Vasudevan, A. Jeevanantham, R. Manoharan, 2015 .

Dynamic characterization of a laminated composite magnetorheological fluid sandwich plate

R. Vasudevan, A. Jeevanantham, R. Manoharan, 2014 .

Enhancement of idling characteristics using multi-objective approach in light-duty diesel Vehicle fuelled with orange peel biofuel

B. Ashok, Ashwin Jacob, R. Vignesh, 2021 .

Calibration of engine parameters and fuel blend for vibration and noise characteristics in CRDI engine fuelled with low viscous biofuel

B. Ashok, R. Vignesh, A. Jeevanantham, 2021 .

Multi-Objective Optimization on Vibration and Noise Characteristics of Light Duty Biofuel Powered Engine at Idling Condition Using Response Surface Methodology

B. Ashok, C. Karthick, A. Jeevanantham, 2021 .

Optimization Study on Incremental Forming of Sheet Metal AA5052 for Variable Wall Angle using CNC Milling Machine

C. Pandivelan, C. Sathiyanarayanan, A. Jeevanantham, 2018 .

Optimization of Injection Molding Process to Minimize Weld-line and Sink-mark Defects Using Taguchi based Grey Relational Analysis

A. Jeevanantham, J. Sreedharan, 2018 .

An experimental analysis on the effect of n-pentanol- Calophyllum Inophyllum Biodiesel binary blends in CI engine characteristcis

B. Ashok, K. Nanthagopal, B. Saravanan, 2019, Energy.

Application of statistical approaches in IC engine calibration to enhance the performance and emission Characteristics: A methodological review

Ashwin Jacob, R. Vignesh, C. Karthick, 2022, Fuel.

Impact of addition of two ether additives with high speed diesel- Calophyllum Inophyllum biodiesel blends on NOx reduction in CI engine

Hwai Chyuan Ong, B. Ashok, K. Nanthagopal, 2019, Energy.

Multi-objective optimization of single point incremental sheet forming of AA5052 using Taguchi based grey relational analysis coupled with principal component analysis

A. Jeevanantham, P. Chinnaiyan, 2014, International Journal of Precision Engineering and Manufacturing.

Formability of Sintered Al, Al-Cu and Al-Cu-TiC Composites during Cold Upsetting

A. Jeevanantham, A. Rajeshkannan, M. Khan, 2020 .

Modelling and analysis of strain hardening characteristics of sintered steel preforms under cold forging

A. Jeevanantham, Sumesh Narayan, A. Rajeshkannan, 2019, AIMS Materials Science.

Strain hardening analysis and modelling for sintered Al-Cu-TiC preforms with varying process parameters during cold upsetting

Devi Rengamani Seenivasagam, A. Jeevanantham, R. Ananthanarayanan, 2020 .

Anticorrosive Property of Aluminum Chloride Nanoparticles on Microbial-Induced Corrosion on Aluminum Workpiece

J. Abraham, Anushree Suresh, A. Jeevanantham, 2023, Journal of Materials Engineering and Performance.

Study on Computational and Conventional Method of Determining Volume of Material Removal in CNC Milling Process

A. K. Jeevanantham, M. Kolivuso, A. Rajeshkannan, 2020 .

Optimizing the Process Parameters in Plasma Arc Cutting using Taguchi Approach for the Case Industry in Fiji

A. Jeevanantham, A. Rajeshkannan, R. Prakash, 2020 .

Multi-objective optimization of single point incremental sheet forming of AA5052 using Taguchi based grey relational analysis coupled with principal component analysis

A. K. Jeevanantham, Pandivelan Chinnaiyan, A. Jeevanantham, 2014 .

Calibration of idling characteristics for Lemon Peel Oil using Central Composite Design in light commercial vehicle diesel engine

B. Ashok, A. Jeevanantham, P. Saiteja, 2020 .

Experimental analysis of higher alcohol–based ternary biodiesel blends in CI engine parameters through multivariate and desirability approaches

Hwai Chyuan Ong, B. Ashok, K. Nanthagopal, 2020, Biomass Conversion and Biorefinery.

Experimental study on the effect of cetane improver with turpentine oil on CI engine characteristics

B. Ashok, K. Nanthagopal, Gopalakrishnan Kumar, 2020 .

Optimization of AA5052 in incremental sheet forming using grey relational analysis

Angshuman Baruah, C. Pandivelan, A. K. Jeevanantham, 2017 .

Multi-objective based deployment of throwboxes in Delay Tolerant Networks for the Internet of Things environment

Siba Kumar Udgata, K Lalitha, Poongodi Chinnasamy, 2020, Evol. Intell..

Tolerance Analysis in Selective Assembly of Multiple Component Features to Control Assembly Variation Using Matrix Model and Genetic Algorithm

A. K. Jeevanantham, S. V. Chaitanya, A. Rajeshkannan, 2019, International Journal of Precision Engineering and Manufacturing.

Matrix Based Tolerance Analysis for Multi-Component Selective Assembly with Geometric and Dimensional Features using Genetic Algorithm

A. K. Jeevanantham, Rajeshkannan Ananthanarayanan, Chaitanya S.V, 2019, International Journal of Productivity and Quality Management.

Analysis of Shrinkages in ABS Injection Molding Parts for Automobile Applications

A. Jeevanantham, J. Sreedharan, 2018 .

Investigations on Machinability and Machining Characteristics of Hybrid Polymer

A. Jeevanantham, G. Venkatachalam, J. Revanthkumar, 2014 .

Multi-Performance Optimization in Friction Stir Welding of AA6082/B4C Using Genetic Algorithm and Desirability Function Approach for Aircraft Wing Structures

S. Tofil, N. Arivazhagan, R. Sandeep, 2021, Journal of Materials Engineering and Performance.

Modelling and analysis of selective assembly using Taguchi's loss function

S. M. Kannan, A. K. Jeevanantham, V. Jayabalan, 2008 .