D. Maldas

发表

S. Bhattacharyya, D. Maldas, S. Bhattacharyya, 1984 .

Interfacial adhesion of lignocellulosic materials in polymer composites: an overview

B. Kokta, D. Maldas, 1993 .

An investigation of the interfacial adhesion between reclaimed newspaper and recycled polypropylene composites through the investigation of their mechanical properties

B. Kokta, D. Maldas, 1994 .

Effect of Fiber Treatment on the Mechanical Properties of Hybrid Fiber-Reinforced Polystyrene Composites: I. Use of Mica and Wood Pulp as Hybrid Filler

B. Kokta, D. Maldas, 1990 .

Influence of polar monomers on the performance of wood fiber reinforced polystyrene composites. I: Evaluation of critical conditions

B. Kokta, D. Maldas, 1990 .

Liquefaction of Wood in the Presence of Polyol Using NaOH as a Catalyst and its Application to Polyurethane Foams

D. Maldas, N. Shiraishi, 1996 .

Liquefaction of biomass in the presence of phenol and H2O using alkalies and salts as the catalyst

D. Maldas, N. Shiraishi, 1997 .

LIQUEFACTION OF SEVERAL BIOMASS WASTES INTO PHENOL IN THE PRESENCE OF VARIOUS ALKALIS AND METALLIC SALTS AS CATALYSTS

M. Alma, D. Maldas, N. Shiraishi, 1998 .

Improvement of the mechanical properties of sawdust wood fibre—polystyrene composites by chemical treatment

B. Kokta, D. Maldas, C. Daneault, 1988 .

Thermoplastic composties of polystyrene: Effect of different wood species on mechanical properties

B. Kokta, D. Maldas, C. Daneault, 1989 .

Surface Tension and Wettability of CCA-Treated Red Maple

D. Kamdem, D. Maldas, 2007 .

Use of wood fibers in thermoplastics. VII. The effect of coupling agents in polyethylene–wood fiber composites

B. Kokta, D. Maldas, C. Daneault, 1989 .

Effect of Fiber Treatment on the Mechanical Properties of Hybrid Fiber Reinforced Polystyrene Composites: IV. Use of Glass Fiber and Sawdust as Hybrid Fiber

B. Kokta, D. Maldas, 1991 .

Effect of Recycling on the Mechanical Properties of Wood Fiber-Polystyrene Composites. II. Sawdust as a Reinforcing Filler

B. Kokta, D. Maldas, 1990 .

Composites of polyvinyl chloride–wood fibers. III: Effect of silane as coupling agent

B. Kokta, P. Béland, D. Maldas, 1990 .

Influence of coupling agents and treatments on the mechanical properties of cellulose fiber–polystyrene composites

B. Kokta, D. Maldas, C. Daneault, 1989 .

Composites of poly(vinyl chloride) and wood fibers. Part II: Effect of chemical treatment

B. Kokta, P. Béland, D. Maldas, 1990 .

Composites of polyvinyl chloride—wood fibers: IV. Effect of the nature of fibers

B. Kokta, D. Maldas, C. Daneault, 1989 .

Improving adhesion of wood fiber with polystyrene by the chemical treatment of fiber with a coupling agent and the influence on the mechanical properties of composites

B. Kokta, D. Maldas, 1989 .

Effect of recycling on the mechanical properties of wood fiber–polystyrene composites. Part I: Chemithermomechanical pulp as a reinforcing filler

B. Kokta, D. Maldas, 1990 .

Phenolic resol resin adhesives prepared from alkali-catalyzed liquefied phenolated wood and used to bond hardwood

D. Maldas, N. Shiraishi, Y. Harada, 1997 .

Graft copolymerization of nitrogen oxide treated thermomechanical pulp

B. Kokta, D. Maldas, A. Kuruvilla, 1990 .

Radiation‐induced graft copolymerization of mixtures of styrene and acrylamide onto cellulose acetate. I. Effect of solvents

D. Maldas, S. Bhattacharyya, 1982 .

Performance of hybrid reinforcements in PVC composites. II: Use of surface‐modified mica and different cellulosic materials as reinforcements

B. Kokta, D. Maldas, 1993 .

Composite Molded Products Based on Recycled Thermoplastics and Waste Cellulosics. II. Kenaf Fiber-Recycled PE Composites

B. Kokta, D. Maldas, 1995 .

Influence of Organic Peroxide on the Performance of Maleic Anhydride Coated Cellulose Fiber-Filled Thermoplastic Composites

B. Kokta, D. Maldas, 1991 .

Surface modification of wood fibers using maleic anhydride and isocyanate as coating components and their performance in polystyrene composites

B. Kokta, D. Maldas, 1991 .

Performance of treated hybrid fiber-reinforced thermoplastic composites under extreme conditions: Part I—Use of mica and wood pulp as hybrid fiber

B. Kokta, D. Maldas, 1991 .

Effects of Coating Treatments on the Mechanical Behavior of Wood Fiber-Filled Polystyrene Composites. II. Use of Inorganic Salt/Polyvinyl Chloride and Isocyanate as Coating Components

B. Kokta, D. Maldas, 1990 .

Effect of fiber treatment on the mechanical properties of hybrid fiber reinforced polystyrene composites. Part II. Use of glass fiber and wood pulp as hybrid fiber

B. Kokta, D. Maldas, 1990 .

Resinification of NaOH-catalyzed phenolated wood–phenol mixture with formalin for making molding materials

M. Alma, D. Maldas, N. Shiraishi, 2002 .

Liquefaction of Wood in the Presence of Phenol Using Sodium Hydroxide as a Catalyst and Some of Its Characterizations

D. Maldas, N. Shiraishi, 1996 .

Composites of Polyvinyl Chloride-Wood Fibers. I. Effect of Isocyanate as a Bonding Agent

B. Kokta, P. Béland, D. Maldas, 1990 .

Use of wood fibers in thermoplastic composites: VI. Isocyanate as a bonding agent for polyethylene–wood fiber composites

B. Kokta, D. Maldas, C. Daneault, 1988 .

Influence of maleic anhydride as a coupling agent on the performance of wood fiber-polystyrene composites

B. Kokta, D. Maldas, 1991 .

Influence of phthalic anhydride as a coupling agent on the mechanical behavior of wood fiber–polystyrene composites

B. Kokta, D. Maldas, 1990 .

The effect of aging conditions on the mechanical properties of wood fiber-polystyrene composites: I. Chemithermomechanical pulp as a reinforcing filler

B. Kokta, D. Maldas, 1989 .

Role of Coupling Agents on the Performance of Woodflour-Filled Polypropylene Composites

B. Kokta, D. Maldas, 1994 .

Composite Molded Products Based on Recycled Polypropylene and Woodflour

B. Kokta, D. Maldas, 1995 .

Composite molded products based on recycled thermoplastics and waste cellulosics. I: Peat moss-recycled PE composites

B. Kokta, D. Maldas, 1994 .

Performance of Surface Modified Nutshell Flour in HDPE Composites

B. Kokta, D. Maldas, J. Nizio, 1992 .

Performance of Treated Hybrid Fiber-reinforced Thermoplastic Composites under Extreme Conditions. II. Use of Glass and Wood Pulp as Hybrid Fiber

B. Kokta, D. Maldas, 1991 .

Wettability of extracted southern pine

D. Kamdem, D. Maldas, 1999 .

Use of wood fibres as reinforcing fillers for polystyrene

B. Kokta, D. Maldas, S. Sean, 1988 .

Recycled Thermoplastic- Woodflour Composites

B. Kokta, D. Maldas, 1994 .

Molecular weight distribution of the graft copolymer comprising mixtures of styrene and acrylamiae on cellulose acetate film by means of gel permeation chromatography

D. Maldas, S. Bhattacharyya, 1986 .

Water Repellency of Several Wood Species Impregnated with Vinyl Monomers

M. Alma, H. H. Lu, D. Maldas, 1995 .

Dimensional Stability of Several Wood Species Treated with Vinyl Monomers and Polyethylene Glycol-1000

M. Alma, H. H. Lu, D. Maldas, 1996 .

Effect of Extreme Conditions On the Mechanical Properties of Wood Fiber-Polystyrene Composites. Ii. Sawdust as a Reinforcing Filler

B. Kokta, D. Maldas, 1990 .

Resinification of Alkali-Catalyzed Liquefied Phenolated Wood and its Characterization as the Novolak-Type Phenolic Resins

D. Maldas, N. Shiraishi, 1997 .

Effect of Fiber Treatment on the Mechanical Properties of Hybrid Fiber Reinforced Polystyrene Composites: III. Use of Mica and Sawdust as Hybrid Fiber

B. Kokta, D. Maldas, 1991 .

The effect of pulping techniques and lignin content on the specific heat capacity of wood pulp

B. Kokta, D. Maldas, A. Kuruvilla, 1989 .

Effect of treated wood fibre-polystyrene composites under prolonged immersion in water.

B. Kokta, D. Maldas, S. Sean, 1990 .

Radiation‐induced graft copolymerization of mixtures of styrene and acrylamide onto cellulose acetate. IV. Studies on some physical properties and structural characterization by means of scanning electron microscopy

D. Maldas, S. Bhattacharyya, 1984 .

Studies on the preparation and properties of particle boards made from bagasse and PVC: II. Influence of the addition of coupling agents

B. Kokta, D. Maldas, 1991 .

Effect of reactive additives on the performance of cellulose fiber-filled polypropylene composites

M. Sain, B. Kokta, D. Maldas, 1993 .

Performance of Hybrid Reinforcements in PVC Composites: III. Use of Surface-Modified Glass Fiber and Wood Pulp as Reinforcements

B. Kokta, D. Maldas, 1992 .

Performance of Hybrid Reinforcements in PVC Composites: IV. Use of Surface-Modified Glass Fiber and Different Cellulosic Materials as Reinforcements

B. Kokta, D. Maldas, 1992 .

Surface characterization of chromated copper arsenate (CCA)-treated red maple

D. Kamdem, D. Maldas, 1998 .

Radiation‐induced graft copolymerization of mixtures of styrene and acrylamide onto cellulose acetate. III. A kinetic study

D. Maldas, S. Bhattacharyya, 1983 .

Radiation-induced graft copolymerization of mixtures of styrene and acrylamide onto cellulose acetate. II. Studies on bromine labeling

D. Maldas, S. Bhattacharyya, 1983 .

Effects of processing variables on the mechanical properties of compression molded polystyrene‐wood fiber composites

B. Kokta, D. Maldas, S. Sean, 1991 .

Effects of coating treatments on the mechanical behavior of wood-fiber-filled polystyrene composites. I, Use of polyethylene and isocyanate as coating components

B. Kokta, D. Maldas, 1990 .

The Mechanical Properties of Wood Fiber-reinforced Polymethylmethacrylate

B. Kokta, D. Maldas, C. Daneault, 1989 .

Performance of treated hybrid fiber reinforced‐thermoplastic composites under extreme conditions. IV. Use of glass fiber and sawdust as hybrid fiber

B. Kokta, D. Maldas, 1991 .

Performance of Hybrid Reinforcements in PVC Composites: Part I—Use of Surface-Modified Mica and Wood Pulp as Reinforcements

B. Kokta, D. Maldas, 1993 .