Tapobrata Dey

发表

Modelling of start-up time for high temperature polymer electrolyte fuel cells

P. Ghosh, D. Singdeo, Tapobrata Dey, 2011 .

Improvement in solid oxide fuel cell performance through design modifications: An approach based on root cause analysis

P. Ghosh, M. Bose, R. Basu, 2014 .

Level set based Immersed Boundary method and its application to CFD simulation for moving boundary problem

A. Sharma, Tapobrata Dey, D. Patil, 2016 .

Packaging Design, Weld Fatigue analysis and Validation of Diesel Exhaust After-treatment System

Tapobrata Dey, R. SunilKumar, Sonal Nareddiwar, 2018, Mechanical Engineering Research.

Transition metal-doped yttria stabilized zirconia for low temperature processing of planar anode-supported solid oxide fuel cell

R. Basu, A. Dutta, Tapobrata Dey, 2014 .

Three Dimensional Computational Fluid Dynamics Modelling of High Temperature Polymer Electrolyte Fuel Cell

P. Ghosh, D. Singdeo, Tapobrata Dey, 2014 .

Phosphoric acid doped poly(2,5-benzimidazole)-based proton exchange membrane for high temperature fuel cell application

R. Nayak, P. Ghosh, A. Bhattacharyya, 2016 .

A new modified-serpentine flow field for application in high temperature polymer electrolyte fuel cell

Prakash C. Ghosh, Debanand Singdeo, Tapobrata Dey, 2017 .

Study of contact resistance at the electrode–interconnect interfaces in planar type Solid Oxide Fuel Cells

P. Ghosh, M. Bose, R. Basu, 2013 .

Contact resistance between bipolar plate and gas diffusion layer in high temperature polymer electrolyte fuel cells

P. Ghosh, D. Singdeo, Tapobrata Dey, 2014 .

Study of Shell and Tube Heat Exchanger with the Effect of Types of Baffles

Tapobrata Dey, P. Dalvi, Pranita Bichkar, 2018 .

Effect of Vibrations on Performance of Polymer Electrolyte Membrane Fuel Cells

P. Ghosh, Tapobrata Dey, Jaydeep Deshpande, 2014 .

Aluminum alloy and galvanized steel CMT weld joints for lightweight automobile applications

V. Jatti, Tapobrata Dey, S. Sarnobat, 2022, Engineering Research Express.

SOFC Power Generation System by Bio-gasification☆

Prakash C. Ghosh, Debanand Singdeo, Manaswita Bose, 2014 .

Influence of microstructure on nano-mechanical properties of single planar solid oxide fuel cell in pre- and post-reduced conditions

P. Ghosh, M. Bose, A. Mukhopadhyay, 2014 .

Study of PEM Fuel Cell End Plate Design by Structural Analysis Based on Contact Pressure

P. Ghosh, D. Singdeo, Tapobrata Dey, 2019, Journal of Energy.

Diagnosis of scale up issues associated with planar solid oxide fuel cells

Prakash C. Ghosh, Rajendra Nath Basu, Debanand Singdeo, 2011 .